|
US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31370.1-2015: Test method of flat panel display (FPD) color filters -- Part 1: Color and transmittance
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31370.1-2015 | English | 129 |
Add to Cart
|
3 days [Need to translate]
|
Test method of flat panel display (FPD) color filters -- Part 1: Color and transmittance
| Valid |
GB/T 31370.1-2015
|
PDF similar to GB/T 31370.1-2015
Basic data | Standard ID | GB/T 31370.1-2015 (GB/T31370.1-2015) | | Description (Translated English) | Test method of flat panel display (FPD) color filters -- Part 1: Color and transmittance | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L90 | | Classification of International Standard | 31-030 | | Word Count Estimation | 6,674 | | Date of Issue | 2015-02-04 | | Date of Implementation | 2015-10-01 | | Quoted Standard | CIE 1931; CIE 1976 | | Regulation (derived from) | National Standards Bulletin 2015 No. 3 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the test method flat panel display (FPD) color filter color, light transmittance. This section applies to a flat panel display (FPD) test with a color filter color, light transmittance. | GB/T 31370.1-2015: Test method of flat panel display (FPD) color filters -- Part 1: Color and transmittance
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of flat panel display (FPD) color filters Part 1.. Color and transmittance
ICS 31-030
L90
National Standards of People's Republic of China
Flat panel display (FPD) color filter test method
Part 1. color and light transmittance
Testmethodofflatpaneldisplay (FPD) colorfilters-
Part 1. Colorandtransmittance
Issued on. 2015-02-04
2015-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Summary of Method 1
4 Equipment 1
5 Procedure 2
6 Test Report 2
Foreword
GB/T 31370 "flat panel display (FPD) color filter testing methods" intended to be divided into the following sections.
--- Part 1. color and light transmittance;
--- Part 2. light fastness;
--- Part 3. heat resistance;
--- Part 4. Chemical Resistance;
This section GB/T Part of 131,370.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This part of the National Standardization Technical Committee device and semiconductor material (SAC/TC203) and focal points.
This part of the main drafting units. China Electronics Standardization Institute.
The main drafters of this section. Peikuai Chuan, Wang Xiang, Fu Xuetao, pipe Qi, Fengya Bin.
Flat panel display (FPD) color filter test method
Part 1. color and light transmittance
1 Scope
GB/T 31370 provisions of this part of the test method for flat panel display (FPD) color filter color, light transmittance.
This section applies to a flat panel display (FPD) test color filter color, light transmittance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
CIE1931 standard colorimetric system
CIE1976 color space
3 Methods Summary
Enter the open test instruments to measure the parameters of the instrument is preheated to a stable state. To measure the reference amount of light, and then the sample was placed in the measuring table
On adjusting the position of the measurement point measuring the amount of light the sample, output test results, including color characteristics and light transmittance.
4 Equipment
4.1 Spectrophotometer
4.1.1 wavelength range
The wavelength range of 380nm ~ 780nm, the wavelength interval of 1nm.
4.1.2 measurement area
Measuring spot size on the surface of the sample or incident light spot size should be smaller than the measured light transmission sub-pixel area.
4.2 Sample table
4.2.1 The surface of the sample should be placed perpendicular to the incident beam.
4.2.2 sample stage should have sufficient mechanical stroke, in order to ensure the region between the color filter and the transparent substrate, its outer region can be
measuring.
4.3 Reference
Measuring the amount of light that does not contain the reference substrate should be measured target layer, i.e., it does not include a color filter or a glass substrate, a color filter area
Other than the glass substrate.
4.4 Calibration
4.4.1 according to the manufacturer's instructions, the test instrument calibration.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31370.1-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 31370.1-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31370.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31370.1-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|