| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30589-2014 | English | 145 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Steel wire rope terminations -- Ferrule-securing sling
| Valid |
GB/T 30589-2014
|
PDF similar to GB/T 30589-2014
Basic data | Standard ID | GB/T 30589-2014 (GB/T30589-2014) | | Description (Translated English) | Steel wire rope terminations -- Ferrule-securing sling | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H49 | | Classification of International Standard | 77.140.65 | | Word Count Estimation | 31,369 | | Date of Issue | 6/9/2014 | | Date of Implementation | 1/1/2015 | | Quoted Standard | GB/T 246; GB/T 699; GB/T 3190-2008; GB/T 2828.1; GB/T 4437.1; GB/T 8706; GB 8918; GB/T 14436; GB/T 20067; GB/T 20118; YB/T 4398; YB/T 5359 | | Adopted Standard | BS EN 13411-3-2004+A1-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 11 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the terms and definitions sleeve pressed wire rope rigging, design and processing documents, materials, casing repression, type testing, factory inspection, marking and quality certificate. This standard applies to the nominal diam | GB/T 30589-2014: Steel wire rope terminations -- Ferrule-securing sling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel wire rope terminations. Ferrule-securing sling
ICS 77.140.65
H49
National Standards of People's Republic of China
Steel cord to suppress the end of the sleeve rigging
Issued on. 2014-06-09
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 design document processing orders 2
5 raw material 2
5.1 Rope 2
5.2 sleeve 3
Pressing the sleeve 4 6
6.1 General 4
6.2 casing and matching rope 4
6.3 Cable buckle molding 4
6.4 sleeve pressing program 6
6.5 Quality control after pressing the sleeve 6
7 type examination 6
8 8 delivery inspection
Marking and certification 8 9
Appendix A (informative) pressed aluminum sleeve folded at the cable buckle design requirements 10
Annex B (informative) steel casing repression of wraparound cable clasp Regulation 21
Annex C (informative) This standard EN13411-3.2004 A1.2008 (E) technical differences and reg number table 26
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted law revision using EN13411-3.2004 A1.2008 (E) "end of the rope - Safety - Part 3.
Casing and casing repression "(in English).
Appendix C of this standard are given a list of the technical differences and their reasons for reference.
For comparison, in Appendix C of this standard are listed and EN13411-3.2004 A1.2008 (E) chapter, article numbers against a
Lanbiao.
For ease of use, this standard also made the following editorial changes.
--- Remove the EN13411-3.2004 A1.2008 (E) Introduction;
--- Remove the EN13411-3.2004 A1.2008 (E) Foreword, in accordance with national standards require adding a new preface;
--- Remove the EN13411-3.2004 A1.2008 (E) Annex ZA and Annex ZB.
The standard proposed by China Iron and Steel Association.
This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized.
This standard was drafted. East Coast Marine Engineering Co., Ltd. Kunshan, Juli Rigging Co., Ltd. Jianfeng rigging, metallurgy workers
Industry Information Standards Institute, Guizhou Wire Rope (Group) Co., Ltd., Shanghai is Shanghai Metal Products Co., Ltd., Guangzhou, Hong Feng Lifting Tools
Limited, Mr Hutchison International Limited of Hong Kong.
The main drafters of this standard. driving Long Dong, Wang Si Jun, Liyan Ying, Li Guoying, Cui Zhiqiang, Li Yong, Wang Lingjun, Linxiang Ji, Li Lun Friends,
Eddie Woo, Xu Ke, Zhu Hongbin, Rencui Ying.
Steel cord to suppress the end of the sleeve rigging
1 Scope
This standard specifies the terms and definitions sleeve pressed wire rope rigging, design and processing documents, materials, casing repression, type test,
Delivery inspection, marking and quality certificate.
This standard applies to the nominal diameter of not more than 150mm, the intensity level is not greater than 1960MPa rope sleeve pressing rigging.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 246 metal pipe Flattening test methods
GB/T 699 high-quality carbon structural steel
GB/T 3190-2008 Wrought aluminum and aluminum alloy chemical composition
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 4437.1 aluminum and aluminum alloy extruded tube - Part 1. Seamless Pipe
GB/T 8706 wire rope terminology, designation and classification
GB 8918 important uses rope
GB/T 14436 General industrial products assurance documents
GB/T 20067 large diameter rope
GB/T 20118 General Purpose Wire Rope
YB/T 4398 compaction rope
YB/T 5359 compacted strand wire rope
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Cable sleeve pressing buckle ferrule-securedeyetermination
By pressing ferrule cable clasp is formed at the end of the rope (this standard refers only 3.2, 3.3 cannula pressed cable clasp buckle two kinds of cable).
3.2
Casing repression of wraparound cable clasp flemisheyeferrule-securedtermination
By the end of the rope and the body of the wraparound sleeve strands pressing method of forming a cable clasp (see Fig. 2).
3.3
Pressing sleeve folded at the cable buckle turn-backeyeferrule-securedtermination
By rope and rope end folded body pressing ferrule cable clasp formed (see Figure 3).
3.4
Sleeve pressing ring rigging ferrule-securedendlessloop
By the end of the lap joint using wire rope pressing sleeve ring rope rigging (see Figure 4).
|