|
US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30588-2014: Terminations for steel wire ropes -- Molten metal socketing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30588-2014 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Terminations for steel wire ropes -- Molten metal socketing
| Valid |
GB/T 30588-2014
|
PDF similar to GB/T 30588-2014
Basic data | Standard ID | GB/T 30588-2014 (GB/T30588-2014) | | Description (Translated English) | Terminations for steel wire ropes -- Molten metal socketing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H49 | | Classification of International Standard | 77.140.65 | | Word Count Estimation | 16,179 | | Date of Issue | 6/9/2014 | | Date of Implementation | 1/1/2015 | | Quoted Standard | GB 8918; GB/T 16825.1; GB/T 20067; GB/T 20118; YB/T 5295; YB/T 5359; HG/T 2542; JB/T 5000.13 | | Adopted Standard | BS EN 13411-4-2002+A1-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 11 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the cast alloy steel cord to the socket end (hereinafter referred to as casting sling) product classification, requirements, test methods, marking, packaging, transportation and storage. This standard applies to not less than 6 mm | GB/T 30588-2014: Terminations for steel wire ropes -- Molten metal socketing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terminations for steel wire ropes. Molten metal socketing
ICS 77.140.65
H49
National Standards of People's Republic of China
Alloy cast steel cord to the socket end
Issued on. 2014-06-09
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Product Category 1
4.1 Order Contents 1
4.2 Classification and Code 2
4.3 Part 3
4.4 Example 3 mark
5 requires 3
5.1 Parts and Materials 3
5.2 casting preparation 3
Cleaning 5 5.3
5.4 Consolidation casting 5
5.5 sling assembly quality 6
6 Test methods 6
6.1 Visual inspection 6
6.2 tensile test 7
6.3 Inspection Rule 7
6.4 determination Principle 8
6.5 marks 8
7 signs, packaging, transportation and storage 8
7.1 Product tag or label mark 8
7.2 Packaging 8
7.3 Transport 8
7.4 Storage 8
Appendix A (informative) casting alloy cable section 9
Annex B (informative) Operating Temperature 10
Annex C (informative) This standard EN13411-4.2002 A1.2008 technical differences and their causes 11
Annex D (informative) This standard EN13411-4.2002 A1.2008 Chapter 12 Control strip
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted law revision using EN13411-4.2002 A1. "steel cord to end fixed connection 2008-- Safety - Part 4
. Alloy and resin cast sockets "(in English).
This standard gives a list of the technical differences and their causes in Appendix C for reference.
The Standard made the following editorial changes.
--- "This European standard" be replaced by "this standard";
--- Remove EN13411-4.2002 A1.2008 "Directory", "Preface", cast resin content, and Appendix A, Appendix B, Appendix C,
Appendix D, Appendix E, Appendix ZA;
--- Normative references will be changed to comply with our country's national standards and industry standards.
The standard proposed by China Iron and Steel Association.
This standard by the National Standardization Committee on Steel (SAC/TC183) centralized.
This standard was drafted. Juli Rigging Co., Jianfeng rigging Co., Ltd. Kunshan, east coast marine engineering, metallurgical engineering
Industry Information Standards Institute, Guizhou Wire Rope (Group) Co., Ltd., Dongguan City Hardware Co., Ltd. Jia Yi Jian.
The main drafters of this standard. Yang Jianguo, Wang Ying, Ting tree, ZHU Li-ping, Cui Zhiqiang, Li Yong, Dong Long drive, Si-Jun, Zhou Zhongdong, I still view,
Li Min, Wang Lingjun, Zhu Hongbin, Rencui Ying.
Alloy cast steel cord to the socket end
1 Scope
This standard specifies the cast alloy steel cord to the socket end (hereinafter referred to as casting sling) product classification, requirements, test methods, marking, package
Loading, transport and storage.
This standard applies to not less than 6mm diameter rope hoisting or traction slings alloy casting.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 8918 important uses rope
Inspection and tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
calibration
GB/T 20067 large diameter rope
GB/T 20118 General Purpose Wire Rope
YB/T 5295 Sealing rope
YB/T 5359 compacted strand wire rope
HG/T 2542 Industrial trichlorethylene
JB/T 5000.13 Heavy Machinery General technical requirements - Part 13. Packaging
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Cable socket section
Steel cord to the end having a conical cavity connector.
3.2
Alloy casting socket moltenmetalsocketing
With a molten alloy steel cord to the end of the consolidation process.
3.3
Hook hooking
The end of the wire rope bent hook needed.
4 Products
4.1 ordering content
According to the standard order contract or order should include the following.
a) number of this standard;
b) the product name;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30588-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 30588-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30588-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30588-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|