|
US$459.00 · In stock Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 30587-2014: Steel wire rope sling -- Grommets Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30587-2014 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Steel wire rope sling -- Grommets
| Valid |
GB/T 30587-2014
|
PDF similar to GB/T 30587-2014
Basic data | Standard ID | GB/T 30587-2014 (GB/T30587-2014) | | Description (Translated English) | Steel wire rope sling -- Grommets | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H49 | | Classification of International Standard | 77.140.65 | | Word Count Estimation | 20,261 | | Date of Issue | 6/9/2014 | | Date of Implementation | 1/1/2015 | | Quoted Standard | GB/T 5972; GB 8918; GB/T 16825.1; GB/T 20067; GB/T 20118 | | Adopted Standard | EN 13414-3-2003+A1-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 11 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the use of wire rope slings Hitches terms and definitions, ordering content, product type, requirements, test methods, inspection rules, signs, quality certification, packaging, transport and storage. This Standard applies to wire |
GB/T 30587-2014: Steel wire rope sling -- Grommets---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel wire rope sling. Gromments
ICS 77.140.65
H49
National Standards of People's Republic of China
Wire rope slings Hitches
Issued on. 2014-06-09
2015-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 order contents 2
5 Model 2
6 Requirement 3
Test Method 5 7
8 6 Inspection Rules
9 signs, packaging and quality certificate 6
Appendix A (normative) wire rope and cable-type ring ring rope rope lay length is determined 8
Appendix B (normative) ring cable length measurement 9
Annex C (normative) pin diameter 11
Annex D (informative) This standard EN13414-3.2003 A1.2008 structure change compared to the situation 12
Annex E (informative) This standard EN13414-3.2003 A1.2008 technical differences and their causes 13
Annex F (informative) strophoids usage evaluation and scrap Guide 15
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted law revision using EN13414-3.2003 A1.2008 "Steel wire rope slings - Safety - Part 3. Ring
Cable and cable-type sling "(in English).
To facilitate comparison, are listed in Appendix D of this standard and EN13414-3.2003 A1.2008 chapter, shall control list numbered.
This standard uses EN13414-3.2003 A1.2008 when modified, is given in Appendix E of the technical differences and their causes
List for reference.
For ease of use, this standard also made the following editorial changes.
--- "This European standard" be replaced by "this standard";
--- Remove the EN13414-3.2003 A1.2008 foreword, in accordance with national standards require adding a new preface;
--- Remove the EN13414-3.2003 A1.2008 Annex G, Annex ZA and Annex ZB;
--- Modify the EN13414-3.2003 A1.2008 introduction.
The standard proposed by China Iron and Steel Association.
This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized.
This standard was drafted. Juli Rigging Co., Jianfeng rigging Co., Ltd. Kunshan, east coast marine engineering, metallurgical engineering
Industry Information Standards Institute.
The main drafters of this standard. Yang Jianguo, Wang Ying, Ting tree, ZHU Li-ping, Cui Zhiqiang, Li Yong, Dong Long drive, Si-Jun, Wang Lingjun, Zhu Hongbin,
Ren Cuiying.
Introduction
The standard safety factor of greater than 60mm diameter ring cable provided (ZP) lower than the general-purpose ring search, consider the following main
factor.
a) a ring diameter greater than 60mm cable is not used for general lifting work, and used according to the design, structure, frequency determined
Special operations;
b) usually calculated or measured mass of the load with high accuracy, for a lifting or limited;
c) hoisting operations at the command of the commander of the slow lifting.
Wire rope slings Hitches
1 Scope
This standard specifies wire rope slings with ring cable terms and definitions, content ordering, product model, requirements, test methods, inspection rules, marking
Chi, a certificate of quality, packaging, transport and storage.
This standard applies to wire rope diameter of not more than 696mm lifting rings for cable (hereinafter referred to as loop cable).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5972 crane wire rope maintenance, maintenance, installation, examination and discard (GB/T 5972-2009, ISO 4309.
2004, IDT)
GB 8918 important uses rope (GB 8918-2006, ISO 3154. 1988, MOD)
Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
Associate (GB/T 16825.1-2008, ISO 7500-1.2004, IDT)
GB/T 20067 large diameter rope
GB/T 20118 General Purpose Wire Rope (GB/T 20118-2006, ISO /DIS2408.2002, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Rope ring rope wireropegrommet
A continuous length of rope around a particular share of the annular core, in accordance with the provisions of the twisting pitch cycle six laps wound from the ring ropes, cable body
Structure shown in Figure 1.
Explanation.
1 --- cord is the core rope;
2 --- shares rope or wire rope.
1 cable structure diagram
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30587-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 30587-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30587-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30587-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|