|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3048.10-2007: Test methods for electrical properties of electric cables and wires -- Part 10: Spark test of extruded protective sheaths
Status: Valid GB/T 3048.10: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3048.10-2007 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for electrical properties of electric cables and wires -- Part 10: Spark test of extruded protective sheaths
| Valid |
GB/T 3048.10-2007
|
| GB/T 3048.10-1994 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test methods for determining electrical properties of electric cables and wires. Spark of extruded anti-corrosion protective sheaths
| Obsolete |
GB/T 3048.10-1994
|
| GB 3048.10-1982 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Elesctric wires and cables--Test method for spark of extruded anti-corrosion protective sheaths
| Obsolete |
GB 3048.10-1982
|
PDF similar to GB/T 3048.10-2007
Basic data | Standard ID | GB/T 3048.10-2007 (GB/T3048.10-2007) | | Description (Translated English) | Test methods for electrical properties of electric cables and wires -- Part 10: Spark test of extruded protective sheaths | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K13 | | Classification of International Standard | 29.060 | | Word Count Estimation | 7,77 | | Date of Issue | 2007-12-03 | | Date of Implementation | 2008-05-01 | | Older Standard (superseded by this standard) | GB/T 3048.10-1994 | | Quoted Standard | GB/T 2900.10-2001; GB/T 3048.1; GB/T 3048.9-2007; JB/T 4278.10 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2007 (total 112) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the extrusion corrosion spark test sets of terms and definitions, test equipment, Specimen preparation, test procedures, test results and evaluation, test equipment calibration and test records. This section applies to test extruded metal on metal sleeve or outer armor layer anticorrosive sheath seal. This part should GB/T 3048. 1 together. | GB/T 3048.10-2007: Test methods for electrical properties of electric cables and wires -- Part 10: Spark test of extruded protective sheaths
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for electrical properties of electric cables and wires. Part 10. Spark test of extruded protective sheaths
ICS 29.060
K13
National Standards of People's Republic of China
Replacing GB/T 3048.10-1994
Electrical properties of wire and cable test methods
Part 10. extrusion sheathing spark test
2007-12-03 released
2008-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 test equipment 1
5 Sample Preparation 1
6 Test Procedure 1
7 test results and assessment 2
8 test equipment calibration 2
9 Test Record 2
Foreword
GB/T 3048 "wire and cable electrical performance test method" is divided into 14 parts.
--- Part 1. General;
--- Part 2. Resistivity test of metallic materials;
--- Part 3. semi-conductive rubber material volume resistivity test;
--- Part 4. DC resistance test conductor;
--- Part 5. Insulation resistance test;
--- Part 7. Resistance to tracking test;
--- Part 8. AC voltage test;
--- Part 9. Insulated wire core spark test;
--- Part 10. Extrusion sheath spark test;
--- Part 11. Dielectric loss tangent test;
--- Part 12. Partial discharge test;
--- Part 13. Impulse voltage test;
--- Part 14. DC voltage test;
--- Part 16. Surface resistance test.
This section GB/T 3048 Part 10.
This Part replaces GB/T 3048.10-1994 "Electrical properties of wires and cables - Extrusion corrosion protection sheath spark test." This repair
In accordance with GB/T 1.1-2000 "Standardization Guide Part 1. Standard Structure and Writing Rules" This section has been adjusted.
This section compared with GB/T 3048.10-1994 main changes are as follows.
--- Standard English name changed to "Testmethodsforelectricalpropertiesofelectriccablesandwires-
Part 10. Sparktestofextrudedprotectivesheaths ";
--- The overall structure and layout of this section has been modified according to GB/T 1.1-2000.
1) Chapter 1 is "Scope" (Chapter 1 of the.1994 edition; Chapter 1 of this edition);
2) Chapter 2 is "Normative references" (Chapter 2 of the.1994 edition; Chapter 2 of this edition);
3) Chapter 3 is "Terms and definitions" (1994 edition no; Chapter 3 of this edition);
4) Chapter 4 is "Test Equipment" (Chapter 3 of the.1994 edition; Chapter 4 of this edition);
5) Chapter 5, "Specimen Preparation" (Chapter 4 of the.1994 edition; Chapter 5 of this edition);
6) Chapter 6, "Test Procedures" (Chapter 5 of the.1994 edition; Chapter 6 of this edition);
7) Chapter 7 is "Test Results and Assessment" (Chapter 6 of the.1994 edition; Chapter 7 of this edition);
8) Chapter 8 "Calibration of test equipment" (1994 edition no; Chapter 8 of this edition);
9) Chapter 9, "Test Records" (1994 edition no; Chapter 9 of this edition);
--- In Chapter 2, "Normative references" to supplement the relevant standards (1994 edition of Chapter 2; Chapter 2 of this edition);
--- Added Chapter 3 "Terms and definitions" (1994 edition no; Chapter 3 of this edition);
--- In Chapter 4 "test equipment" to delete the high-frequency spark testing machine (1994 version 3.1; Chapter 4 of this edition);
--- In Chapter 6, "Test Procedure" to delete the relevant provisions of the high-frequency spark test (1994 version 5.2 and Table 1; 6.2 of this version
And Table 1);
--- Added Chapter 8 "Calibration of test equipment" (1994 edition no; Chapter 8 of this edition);
--- Added Chapter 9, "Test Record", specifies the test record should be recorded in the specific content (1994 edition no; Chapter 9 of this edition).
This part is proposed by China Electrical Equipment Industry Association.
This part of the national wire and cable standardization Technical Committee.
This section is drafted. Shanghai Electric Cable Research Institute.
The main drafters of this section. Wan Shuter, aftershocks, Xia Kai Rong.
This part of the standard replaces the previous editions are. GB 3048.10-1982, GB/T 3048.10-1994.
Electrical properties of wire and cable test methods
Part 10. extrusion sheathing spark test
1 Scope
GB/T 3048 provisions of this section extruded protective sleeve spark test terms and definitions, test equipment, sample preparation, test procedures
Order, test results and assessment, test equipment calibration and test records.
This section applies to test crowded in the metal sleeve or metal armor layer corrosion protection jacket sealing.
This section should be used together with GB/T 3048.1.
2 Normative references
The following documents contain provisions which, through reference in this part of GB/T 3048, become the provisions of this section. For dated references,
Its subsequent Amendments (not including errata content) or revisions do not apply to this section, however, to encourage the agreement reached under this section
Of the parties to study whether the latest version of these documents can be used. For undated references, the latest version applies to this section.
GB/T 2900.10-2001 Electrotechnical terminology cables (idt IEC 60050 (461). 1984)
GB/T 3048.1 wire and cable electrical performance test methods - Part 1. General
GB/T 3048.9-2007 wire and cable electrical performance test methods - Part 9. insulated wire core spark test
JB/T 4278.10 Eraser wire and cable test equipment and equipment testing methods spark testing machine
3 Terms and definitions
GB/T 2900.10-2001 established the following terms and definitions apply GB/T 3048 of this section.
3.1
An insulation test by which the electrode applies a test voltage to the electrode as it passes through the surrounding electrode.
4 test equipment
Power frequency spark testing machine or DC spark testing machine, should be consistent with the relevant provisions of GB/T 3048.9-2007.
5 sample preparation
The entire manufactured length of the cable.
6 test procedures
6.1 Spark test should be carried out in the process of extrusion anti-corrosion sleeve, but also in the spark test machine alone.
6.2 When using the power frequency spark testing machine for testing, the test cable metal sheath or armor should be grounded.
When using DC spark testing machine for testing, the test cable metal sheath or armor should generally be connected with the negative pole of the DC power supply.
6.3 The test voltage should be consistent with the provisions of product standards, if the product standard does not provide the appropriate test voltage value, you can recommend Table 1
The voltage value of the test.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3048.10-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 3048.10-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3048.10-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3048.10-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3048.10-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3048.10-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|