|
US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30440.3-2013: Specification for product of amusement game -- Part 3: Arcade
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30440.3-2013 | English | 419 |
Add to Cart
|
3 days [Need to translate]
|
Specification for product of amusement game -- Part 3: Arcade
| Valid |
GB/T 30440.3-2013
|
PDF similar to GB/T 30440.3-2013
Basic data | Standard ID | GB/T 30440.3-2013 (GB/T30440.3-2013) | | Description (Translated English) | Specification for product of amusement game -- Part 3: Arcade | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L62 | | Classification of International Standard | 35.160 | | Word Count Estimation | 18,192 | | Date of Issue | 2013-12-31 | | Date of Implementation | 2014-08-15 | | Quoted Standard | GB/T 191; GB/T 1988; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2423.10; GB/T 2828.1; GB 4706.1-2005; GB 4943.1; GB/T 5271.14; GB/T 11460; GB 13000; GB/T 15732; GB 15934; GB 18030; GB/T 18031; GB/T 18455; GB/T 18790; GB/T 19246; GB/T 21023; GB/T 26125; G | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the categories of products indoor amusement game big game amusement commercial terms and definitions, classification, coding, technical requirements, test methods and quality assessment procedures and signs, packaging, transport an | GB/T 30440.3-2013: Specification for product of amusement game -- Part 3: Arcade---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for product of amusement game Part 3. Arcade
ICS 35.160
L62
National Standards of People's Republic of China
Game amusement product specifications
Part 3. Indoor amusement big game commercial
Issued on. 2013-12-31
2014-08-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 large commercial indoor amusement games in category 2 classification
5 2 Technical Requirements
6 Test methods 6
7 quality assessment procedures 9
8 signs, packaging, transportation and storage 10
Appendix A (normative) Check the programming principles and technical requirements 12
Classification criterion and Appendix B (normative) Fault 13
Foreword
GB/T 30440 "amusement game products specifications" into the following sections.
--- Part 1. General requirements;
--- Part 2. Content compliance;
--- Part 3. Indoor big game commercial game machines;
--- Part 4. Handheld game consoles;
--- Part 5. game consoles;
This section GB/T Part of 330,440.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents.
This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.
This section drafted by. China Electronics Standardization Institute, Guangzhou Hualikeji Co., Ltd. Guangzhou Wyatt Bel Animation Technology has
Ltd., Zhongshan Shi Yu Animation Technology Co., Ltd., Guangzhou Sealy Electronic Technology Co., Ltd. Guangzhou Kai Cheong Electronics Co., Ltd.
The main drafters of this section. Zhao Jinghua, Su Benli, who knot line Songjahak large, Xu Jianlin, Xiong Fagui, Fan star.
Game amusement product specifications
Part 3. Indoor amusement big game commercial
1 Scope
GB/T 30440 provisions of this part of the game amusement products in the commercial large-scale indoor amusement game terms and definitions, classifications,
Coding, technical requirements, test methods, quality assessment procedures and signs, packaging, transportation and storage.
This section applies to large-scale commercial indoor amusement game products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 1988 Technical information interchange bit coded character set
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
Part 1 GB 4706.1-2005 Safety of household and similar electrical appliances. General requirements
GB 4943.1 Security Information technology equipment - Part 1. General requirements
GB/T 5271.14 Information technology - Vocabulary Part 14. Reliability, maintainability and availability
GB/T 11460 Chinese character fonts IT requirements and test methods
GB 13000 Information technology - Universal Multiple-Octet Coded Character Set (UCS)
GB/T 15732 Chinese character keyboard input common set of words
GB 15934 electrical accessories wire assembly and interconnection cord sets
GB 18030 Information technology - Chinese coded character set
GB/T 18031 IT digital input with universal keyboard characters
GB/T 18455 Packaging Recycling Marks
GB/T 18790-line handwritten Chinese character recognition technology requirements and test procedures
GB/T 19246 IT universal keyboard Chinese character input with universal
GB/T 21023 Chinese speech recognition system General technical specifications
GB/T 26125 electrical and electronic products six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) Determination
GB/T 26572 Limited restricted substances in electrical and electronic equipment requirements
GB/T 30440.1 game amusement product specification - Part 1. General requirements
SJ/T 11364 Electronic Information Products Pollution Control Marking Requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Game amusement amusementgame
By providing special equipment to make consumers aware of the interactive game content and course of the game in order to achieve entertainment electronics, mechanical
Means.
3.2
Commercial large indoor amusement arcade game
For placing a public entertainment in the operating consoles for video games commercial platform usually work with analog body movements
Energy, and entertainment activities and interact with the player.
3.3
Coin coincolector
For receiving and sensing device dedicated tokens, coins have read, the number of coins, counterfeit money recognition.
4 large commercial indoor amusement games in the category classification
4.1 Classification
According to GB/T 30440.1 specified category of large commercial indoor amusement game is divided into several classes. Each class with a set of packages
Code numbers with two decimal representation. Each class and the code shown in Table 1.
Table 1 large game game machines in the class code table
Category Code Description
Electronic game equipment control software 01
02 electronic gaming machine control machinery and equipment
Other 99
According to GB/T 30440.1 provides indoor amusement big game commercial code is in a class amusement game products Paragraph 4 encoding.
Large commercial indoor amusement game products category coding structure shown in Figure 1 and Figure 2.
1.2.156.11236.XXXX101XXXXXXXXXXXXXX
1 large indoor commercial game machines in game consoles code structure
1.2.156.11236.XXXX102XXXXXXXXXXXXXX
2 large commercial indoor game amusement game machines in the code structure
4.2 Paste the code
Products manufactured before 4.1 should comply with the provisions of the code and in accordance with the requirements of the product registry affixed to the product remarkable place. The tubular
Requirements management bodies for identification.
5 Technical requirements
5.1 Design Requirements
5.1.1 Hardware Requirements
5.1.1.1 Basic requirements
Products under the following conditions shall ensure that data is correct and complete. After the normal power supply, product features, performance should be normal.
a) normal use;
b) foreseeable misuse;
c) the work of a power outage.
5.1.1.2 Coin requirements
Coin requirements include.
a) the slot should be "coin slot" signs;
b) a series of coin 15 times, eat coins phenomenon should not appear;
c) should read coin currency, coin counters, counterfeit money recognition;
d) should be set coin prompts;
e) When enough money has been put into the game the next game to pass the required amount, then the coin should console TV or listen to tips, every move you make hard
After the credits, and then prompted to stop the coin, you can continue the game.
Stability requirements 5.1.1.3 Structure
Structural stability requirements include.
a) the product should ensure that when the machine under normal operating conditions or by an external force must be able to maintain a balanced center of gravity, which is not inclined,
Overturned;
B) After all machine product quality should be in accordance with different settings and different types of caster angle fixing support in order to move and position the machine
It fixed.
5.1.2 Software Requirements
5.1.2.1 Functional
Software functionality should include.
a) the product should have a certain anti-piracy, non-proliferation technical support capabilities;
b) when the player following the proper guidelines, the game should run smoothly.
5.1.2.2 usability
Software ease of use should include.
a) for all features of the product should be complete and valid description;
b) the product should be provided with sufficient and effective operational guidelines and procedures before the start of the game for the player;
c) product with a game, during the game mode of operation should be consistent;
d) products in the setting function should be considered so that there is a physical defect of users can access.
5.1.2.3 Efficiency
Under specified operating environment, the frame rate of the game screen should meet the design specifications of the system requirements, and should be at least 24 frames/sec.
5.1.2.4 maintenance
Software maintenance shall include.
a) the product should improve self-test. Self-test procedure should be simple, clear instructions, with fault diagnosis function;
b) the product should have a daily revenue figures for the product into operation for viewing and management functions;
c) measures to facilitate software product should be clearly identified user or maintainer version of the product.
5.2 Appearance and structure
Appearance and structure of the product requirements include.
a) the product surface should not have obvious dents, scratches, sharp corners, sharp edges, burrs, cracks, deformation and pollution, surface coating should be uniform, not
Should blistering, cracking, and wear off, there should be no rust metal parts and other mechanical damage;
b) the product should be tightened no loose parts, other parts of the operation switches, etc. should be flexible and reliable;
c) plastic surface should be smooth, good gloss, not deformed, color, shrink, noise, and other undesirable phenomena approved front.
5.3 Security
5.3.1 game security
Security requirements include.
Safety requirements a) video game products should comply with the relevant provisions of GB 4943.1;
b) wire components shall comply with the requirements of GB 15934.
5.3.2 amusement security
Security requirements include.
a) safety requirements for amusement products should meet the requirements GB 4706.1-2005, and.
1) For GB 4706.1-2005 of 7.12.1, toy horse installation instructions should be required to install a residual current device (RCD), which
Rated residual operating current should not exceed 30mA;
2) For GB 4706.1-2005 of 15.2, ① if the outer surface of the product is less than 2m above the ground, and may be put on the product
When set to the container, such as cups and the like, on which will have to quickly dump 0.5L of water to be tested; ② If the product maintenance instructions
The book contains a liquid, the test to be carried out three times; ③ with a 150mm × 75mm × 50mm sponge dampened with water
Cleaning may be cleaned parts. Use a sponge with appreciable force on each side graze approximately 10s;
3) For the 23.3 GB 4706.1-2005, the product in normal use to bending wire bending frequency should be increased
200000 times. The number of bends in the wire during the maintenance operation bent 10,000 times;
b) wire components shall comply with the requirements of GB 15934.
5.4 Chinese Information Processing
Interface displays the text prompt action should be simplified Chinese characters, user-friendly.
5.4.1 Character Set
Products should adopt national standards for character sets.
a) GB/T 1988;
b) at least comply with a mandatory part of GB 18030, and should establish the mapping between GB 13000;
c) other minority languages \u200b\u200bcoded character set.
5.4.2 Character fonts
Kanji fonts used in the product should be consistent with GB/T 11460 requirements.
5.4.3 Chinese character input
Chinese character input requirements include.
a) keyboard input
Keyboard input should be consistent with GB/T 19246 and GB/T 18031 requirements;
b) Handwriting
The product is equipped with handwriting input software should conform to GB/T 18790 requirements;
c) Voice input
The product is equipped with voice input should be consistent with GB/T 21023 requirements.
5.4.4 Chinese dictionary
Chinese lexicon products provided shall be given priority thesaurus GB/T 15732 requirements. In GB/T 15732 should be based on the expansion of vocabulary
In line with our specification language or customs, and should according to the word origin.
5.5 Limited hazardous substances
Products Limited hazardous substances should be consistent with GB/T 26572 requirements.
5.6 Environmental Adaptability
5.6.1 climate adaptation should meet the requirements of Table 2. Specific severity prescribed by the product standard.
Table 2 climate adaptation
Climatic conditions
level
temperature
jobs
Storage and transportation
350 ~ 10 ~ 40-10 ~ 55
-20 To 55
Relative humidity
jobs
Storage and transportation
35% ~ 80% 30% ~ 90% 20% ~ 93% (40 ℃)
20% ~ 93% (40 ℃)
Atm
kPa
86 to 106
5.6.2 mechanical environmental adaptability should meet the requirements of Table 3.
b) misuse;
c) a sudden power outage and power restoration status.
And through the self-test the product to verify that the product shipment data and change data is correct. Specific principles in Appendix A.
6.2.1.2 Coin
Coin Test method comprising.
a) Check the slot mark were visually;
b) normal speed by repeatedly coin operated;
c) should read coin currency, coin counters, counterfeit money recognition;
d) during the coin to see if there is prompt;
e) insufficient amount of money, to see whether a valid prompts.
6.2.1.3 structural stability requirements
Structural stability test method comprising.
a) ground level at a distance of 0.8m, and will exert a force of 600N to produce maximum torque point of the length and width dimensions are at least
Any horizontal surface is 12.5cm × 20cm view the situation;
b) using touch, visually discriminate.
6.2.2 Software Requirements
Software testing conducted in accordance with the relevant national standards.
6.3 appearance and structure inspection
Performed by visual appearance and structure inspection law and related inspection tools.
6.4 Safety Test
Conducted by the relevant provisions of GB 4943.1 and GB 15934.
6.5 Chinese information processing test
The method of checking the product with the corresponding Chinese character font standard font compliance level Chinese information processing inspection GB/T 11460 regulations,
Check the font should also check the character set.
For products with Chinese character input, the GB/T 15732 randomly selected from each of 20 words 2,3,4,5 comparison inspection, should be able to
Correct output, or provide a full set of printed text thesaurus checked by the producers.
6.6 Limited hazardous substances
Toxic and hazardous substance testing conducted in accordance with Test Method GB/T 26125 of.
6.7 Environmental Adaptability
6.7.1 Overview
The following test, the initial testing and final inspection regulations, unified by 5.2 appearance and structure of checks and inspection procedures run
Again, the work should be normal.
When some equipment integration of product structure is loaded, there are special requirements for its test methods shall be described in the product standard.
6.7.2 Lower temperature test
6.7.2.1 temperature limit test
According to GB/T 2423.1 "Test Ad" conduct. The test sample should be the initial detection. Table 2 severities take specified operating temperature
Lower limit power-running inspection program 2h, recovery time is 2h.
6.7.2.2 Storage and transport temperature limit test
According to GB/T 2423.1 "Test Ab" conduct. Severities given in table 2 under the storage and transportation of temperature limits specified. Without test sample
Storage 16h working conditions. Recovery time is 2h, and a final test.
In order to prevent condensation and frost test test sample, allowing the test sample after the experiment with polyethylene film sealed. If necessary
Kit can be installed in a sealed moisture absorption agent.
6.7.3 Test temperature limit
6.7.3.1 working temperature limit test
According to GB/T 2423.2 "Test Bd" conduct. Test samples were detected after this initial test severities take specified in Table 2
Limits on the operating temperature. Check the power-running program 2h, recovery time is 2h.
6.7.3.2 Storage and transport temperature limit test
According to GB/T 2423.2 "Test Bb" conduct. Severities given in table 2 on storage and transportation of temperature limits specified. Without test sample
Storage 16h working conditions. Recovery time is 2h, and a final test.
6.7.4 Damp heat test
Damp heat test under working conditions 6.7.4.1
According to GB/T 2423.3 in "Test Ca" carried severities take Table 2 specified operating temperature limit of the test sample shall be carried out on a hot and humid
Line initial detection. Test duration is 2h. During this power-running inspection program should work properly. Recovery time is 2h, hand
The last line of detection.
Damp heat test 6.7.4.2 under storage and transportation conditions
According to GB/T 2423.3 in "Test Ca" conducted test sample shall be carried out initial tests. Take severities specified in Table 2, storage and transportation
Temperature, hot and humid limit, the test sample does not work under conditions of storage 48h. Recovery time 2h, and a final test.
6.7.5 Vibration Test
6.7.5.1 according to GB/T 2423.10 in "Test Fc" conduct. Test sample by job position is fixed vibration table, initial testing.
Test sample in an inactive state, according to the value specified in Table 3, respectively, in the axial direction of three mutually perpendicular vibration.
6.7.5.2 Initial inspection vibration response
Test within a given frequency range, to complete a sweep in cycle. During the test record critical frequency, up to one test direction
No more than four dangerous frequencies.
6.7.5.3 fixed frequency endurance test
Using an initial inspection frequency vibration response dangerous recorded by fixed-frequency test frequency if two dangers exist, you can not only choose their
Of one.
Within a predetermined frequency range of the test, such as no significant hazard frequency, or frequency over four danger is not fixed frequency endurance tests, do only sweep
7.3 Inspection stereotypes
7.3.1 product should be finalized by setting test.
7.3.2 stereotypes test specified by the product manufacturing units by a nationally recognized testing organizations responsible for.
Number of samples 7.3.3 stereotypes Inspection qualification test according to product volume, test time and cost determination, sample test items in general the number of
Amount of 2 units.
Determination and included in test method 7.3.4 stereotypes of each test item failure in Appendix B. Failure or through an experiment appeared, however, the
It should stop testing. Identify the cause of the malfunction, failure analysis report presented again to proceed with the test. If the error occurs again in subsequent tests
Or after a certain pass when the cause of the fault, troubleshooting, failure analysis report proposes, should re-examine stereotypes.
To submit inspection reports finalized after test 7.3.5.
7.4 Quality conformance inspection
7.4.1 batch test
7.4.1.1 batch or continuous production of products, conduct full batch testing, inspection, failure occurs when any one, re-enter after repair
Line inspection, if there is any one failed again when the station product convicted of substandard products. Batch inspection performance and appearance of structural inspection,
Allow Press GB/T 2828.1 sample tests, treatment and rejection sampling plan after the product standard shall be defined.
7.4.1.2 batch manufacturing unit inspected by quality inspection department is responsible for.
7.4.2 Periodic Inspection
7.4.2.1 continuously produced, at least once a year inspection cycle.
7.4.2.2 Periodic inspection designated by China National Certification and Accreditation pipe products manufactured by the manufacturing unit by the quality inspection department or unit
Management Committee recognized testing organizations responsible for. According to the requirements of the ordering party, the manufacturing unit should provide the product's recent periodic inspection reports.
7.4.2.3 Periodic inspection sample shall be drawn at random batch inspection of products, the number of samples in which the reliability of the test item in accordance with the acceptance
Bulk products, test time and cost determination, the test sample test items remaining number is two.
Fault 7.4.2.4 Periodic inspection and test items included in the determination methods, see Appendix B, in addition to reliability acceptance test, the failure of the remaining items
The process proceeds as described below. Inspection failure or any one pass should identify the cause of failure, failure analysis report presented. Amended
Re-examination of the complex. After that, then do the following sequence of tests, such as failure or an pass reappears, however, in the troubleshooting original
Due to proposed fault analysis report, and then restored, the cycle should be re-tested. In re-examination, he also appeared in a one-pass
However, when the case is judged pass the product test cycle.
Periodic Inspection by sample test environment should be printed with the mark should not generally as genuine factory.
To submit periodic inspection reports after test 7.4.2.5.
8 signs, packaging, transportation and storage
8.1 mark
It shall include. p...
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30440.3-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30440.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30440.3-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30440.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|