|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29756-2013: Test methods of physical property for dry-mix mortar
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29756-2013 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Test methods of physical property for dry-mix mortar
| Valid |
GB/T 29756-2013
|
PDF similar to GB/T 29756-2013
Basic data | Standard ID | GB/T 29756-2013 (GB/T29756-2013) | | Description (Translated English) | Test methods of physical property for dry-mix mortar | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q11 | | Classification of International Standard | 91.100.10 | | Word Count Estimation | 26,243 | | Quoted Standard | GB 175; GB/T 3810.5-2006; GB/T 17671-1999; JC/T 681; JC/T 723; JC/T 726; JC/T 958 | | Regulation (derived from) | National Standards Bulletin No. 18 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: dry mortar organic content, fresh mortar consistency (table method), the density of fresh mortar, mortar fresh air content, compressive strength of hardened mortar flexural hardened mortar water absorption, tensile sticky hardened | GB/T 29756-2013: Test methods of physical property for dry-mix mortar---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods of physical property for dry-mix mortar
ICS 91.100.10
Q11
National Standards of People's Republic of China
Physical performance test method mortar dry mix
Issued on. 2013-09-18
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 a standard test conditions
5 Sample preparation 1
6 1 dry mortar organic content
7 fresh mortar consistency (jump tables Act) 2
8 fresh mortar density
9 fresh mortar air content 5
10 flexural compressive strength of hardened mortar 7
11 hardened mortar water absorption 7
12 hardened mortar tensile bond strength 9
13 lateral deformation hardening mortar 10
14 hardened mortar shrinkage 14
Appendix A (normative) containing 16 gas analyzer calibration
Appendix B (normative) Concrete slab 17
Annex C (normative) mortar failure mode 20
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Building Materials Federation.
This standard by the National Standardization Technical Committee cement (SAC/TC184) centralized.
This standard is drafted by. China Building Material Test Certification Center, China Building Materials Academy.
Participated in the drafting of this standard. Dow Chemical (China) Co., Ltd., Shenzhen Academy of Building Research Co., Ltd. Shenzhen Hirota Decoration
Group Co., Ltd. Tianjin Yu Chuan dry mortar, Guangdong natural Tu Chemical Co., Ltd., Shanghai Qi-resistant building materials Co.,
Beijing industry university.
The main drafters. Zhang Danwu, Qiaoya Ling, Liu Chen, Jiang Lizhen, tensor, Anna, make Wei Guan, Zhang Jie, Li Yuhai, Li Shaojiang, Sun Mei,
Libo Xian, Chen Ying children, Lanming Zhang, Yang Yi, Huang Qinglin.
This standard is the first release.
Introduction
Dry mortar is a component of the cement, aggregates or dried powder, additives and other professional production plant by a certain percentage in a metered mixture of mixed
Compound at the point of use to scale mixing with water or other components use. Usually mainly used for masonry, plaster, tile adhesives, building insurance
Temperature, surface or wall leveling, waterproofing, repair, decoration.
Our dry mix mortar industry began to develop rapidly in the late 1990s, a wide range of products, including exterior insulation adhesive sand
Pulp and surface mortar, ceramic tile adhesives and grouts, self-leveling the ground with cement-based mortar, facing the wall with mortar. Currently, the Bank
Industry no universal test method conducted and summarized, in order to facilitate R & D staff in this new class of materials for scientific
Judgment and innovation, while reducing product standards when writing repeated description of test methods, reference materials home and abroad, the preparation of this standard.
Physical performance test method mortar dry mix
1 Scope
This standard specifies the dry mortar organic matter content, fresh mortar consistency (jump tables Act), fresh mortar density, air content of fresh mortar, hardening
Flexural and compressive strength of hardened mortar water absorption, tensile bond strength of hardened mortar, mortar lateral deformation hardening and hardening mortar shrinkage
Physical performance test method.
This standard applies to the determination of the dry mix mortar relevant physical properties.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 175 Common Portland Cement
GB/T 3810.5-2006 Test methods of ceramic tiles - Part 5. Determination of coefficient of restitution brick impact resistance
GB/T 17671-1999 cement mortar strength test method (ISO method) (idt ISO 679. 1989)
JC/T 681 planetary cement mortar mixer
JC/T 723 cement mortar shaker
JC/T 726 cement mortar test mode
JC/T 958 cement mortar fluidity tester (jump tables)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Lateral deformation transversedeformation
Shaped hardening mortar predetermined size by three-point bending load, specimen damage occurred before the maximum displacement.
4 Standard test conditions
Laboratory standard test conditions. temperature (23 ± 2) ℃, relative humidity (50 ± 5)%, wind speed cyclic test area less than 0.2m/s.
5 Sample preparation
Test materials (including water) should be placed under standard test conditions more than 24h.
6 dry mortar organic content
6.1 Principle
The dry mortar after a specified high temperature burning, calculated as a percentage of volatile organic content of the mortar.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29756-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29756-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29756-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29756-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|