| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29169-2012 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Petroleum and natural gas industries -- Inspection and classification of used drill stem elements
| Valid |
GB/T 29169-2012
|
PDF similar to GB/T 29169-2012
Basic data | Standard ID | GB/T 29169-2012 (GB/T29169-2012) | | Description (Translated English) | Petroleum and natural gas industries -- Inspection and classification of used drill stem elements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 199,161 | | Quoted Standard | ISO 10424-1; ISO 11961; API RP 7A1 | | Adopted Standard | ISO 10407-2-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the drill stem elements in each detection level of testing requirements and test procedures. This standard relates to the drill stem elements including drill pipe, drill pipe joints, rotary shouldered connection, drill boats, heavy | GB/T 29169-2012: Petroleum and natural gas industries -- Inspection and classification of used drill stem elements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries. Inspection and classification of used drill stem elements
ICS 75.180.10
E92
National Standards of People's Republic of China
Oil and Gas Industry
With drill testing and grading member
(ISO 10407-2.2008, Petroleumandnaturalgasindustries-
Rotarydrilingequipment-Part 2. Inspectionandclassificationof
useddrilstemelements, MOD)
Issued on. 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Symbols and Abbreviations 7
4.1 Symbols 7
4.2 Abbreviations 8
5 9 Consistency
5.1 Detection basis 9
5.2 reproducibility of the results 9
5.3 Ordering information 10
6 Quality Assurance 10
6.1 Overview 10
6.2 Checking and procedures 10
6.3 Device Description 10
10 6.4 Personnel Qualification
6.5 proof system to detect artificial defect detection capability of dynamic data 10
Report 10 6.6
7 qualified testing personnel identified 11
7.1 Overview 11
7.2 Written records 11
7.3 eligibility requirements 11
7.4 11 training requirements
7.5 Evaluation 11
7.6 Background 11
7.7 11 eligibility review
7.8 Document 12
7.9 Certification of NDT personnel 12
8 universal detection program 12
8.1 Overview 12
8.2 workplace requirements 12
8.3 workplace documents 12
8.4 before detection program 12
8.5 drill pipe and drill pipe joints Classification Mark 13
After completion of the detection program 8.6 13
9 common NDT method claim 16
9.1 Overview 16
9.2 Equipment 16
9.3 Lighting 17
9.4 Magnetic particle testing equipment 18
9.5 ultrasonic testing equipment 19
9.6 electromagnetic detection device 20
Detection and Classification of the drill string member 10 20
10.1 full length visual inspection body --- 20
10.2 --- diameter measurement body 21
10.3 --- ultrasonic thickness body 22
10.4 --- body full length of the electromagnetic detector 24
10.5 --- full length of the body and the wall thickness of the transverse imperfections ultrasonic testing 26
10.6 --- body the entire length of transverse imperfections, imperfections and wall thickness of the longitudinal ultrasonic testing 27
10.7 --- magnetic drill pipe body outer surface of the key areas in 30
10.8 bidirectional magnetic drill pipe body --- critical areas outer surface of the detector 32
10.9 --- body full length of wall thinning detected 35
10.10 ultrasonic detector body 36 critical areas ---
10.11 --- body cross-sectional area calculation 39
10.12 --- document review body (traceability) 39
10.13 Evaluation and grading body --- 40
10.14 43 drill pipe joints
10.15 --- threaded tool joints swollen joints and outer elongated nipple examination 46
10.16 Repair rejected tool joints 48
10.17 --- drill pipe joints inside and outside the outer diameter of the nipple 48 and eccentric wear inspection
10.18 --- within the drill pipe joints, outer diameter measurement nipple 50 and eccentric wear inspection
10.19 --- drill pipe joints inside and outside the nipple clamp holding large range of inspection 51
10.20 --- drill pipe joints inside and outside the nipple clamp holding large measuring range 52
10.21 --- externally threaded tool joint 52 magnetic particle testing
10.22 --- threaded tool joint 54 magnetic particle testing
10.23 --- tool joint male connection inner diameter measuring 55
10.24 --- drill pipe joints outer surface of the heat crack magnetic particle testing 56
10.25 --- drill pipe joints outer surface of the heat crack bidirectional wet magnetic particle testing 57
10.26 --- joints expansion cone drill hole depth, the length of the male thread roots and the sealing shoulder width measurement 60
10.27 BHA screwing --- visual inspection chamfered shoulder, shoulder sealing, thread and stress dispersing structure 61
Within 10.28 BHA --- measuring the outer diameter of the nipple, the nipple outer diameter, tapered bore diameter and expanding the reference mark
63 position
The lower portion of the chamfer diameter 10.29 BHA --- Check 65
10.30 BHA --- chamfer diameter measuring 65
10.31 --- within the lower part of BHA and external threads 66 of the magnetic particle testing
10.32 BHA threaded connection --- external and internal threads of liquid penetrant testing 68
The lower portion size 10.33 BHA --- stress dispersion structure measuring 69
10.34 expansion cone depth, length of external thread and external thread measuring root length 71
Visual inspection of the drill collar --- 10.35 entire length of the inner and outer surfaces, label, neck length and large fish clamp holding interval length 72
10.36 kava drill collars hanging slot and groove magnetic particle testing 73
Measuring 10.37 collars hanging slot and slip grooves 75
Short section 10.38 (visual internal and external surfaces), fish-neck length, cross-sectional radius of curvature of the transition and marking 76
10.39 float valve bore groove measuring 77
Magnetic particle testing 10.40 --- short section within the entire length of the surface and an outer surface 78
10.41 HWDP --- visually detected within the entire length of the surface, an outer surface, marking and large clamp holding section 80
Visual inspection and wear form 10.42 Kelly Report 81
Magnetic 10.43 Kelly 82 critical areas of detection
10.44 kelly drive the entire length of the magnetic detection section 82
10.45 Stabilizer (visual internal and external surfaces), fish-neck length, righting edge condition, the ring and tags 83
10.46 stabilizers righting the bottom edge of the magnetic crack detection 84
10.47 85 Function Test
10.48 stabilizers righting bottom edge crack bidirectional wet magnetic particle testing 86
10.49 Visual inspection jar (drilling and fishing), accelerators and jars short section 88
10.50 Maintenance Checks 89
10.51 in accordance with the manufacturer's requirements Measure 89 wear areas
10.52 manufacturers with tools designed test 90
10.53 MWD/LWD --- visual inspection, an inner surface, an outer surface, marking, coating and wear strips 90
10.54 downhole drill motor --- visual inspection, an inner surface, an outer surface, marking, coating and wear strips 91
10.55 reamer, blade, reamer --- visual inspection, an inner surface, an outer surface, marking, coating and wear strips 92
10.56 --- rotary drill guide visual inspection, the inner and outer surfaces, marks and wear strips 93
10.57 93 full-length diameter
Detection 10.58 proprietary tools 94
Detection 10.59 hardbanding 95
10.60 transverse magnetic drill pipe joints and outer surface of the outer threaded inner surface of the detector 98
Magnetic 10.61 drill pipe body in the critical area of \u200b\u200bthe surface of the detection --- 99
The inner surface of the dual magnetic drill pipe body --- 10.62 key area detector 100
10.63 API External upset threaded connection detection 102
Quality Testing and Materials 11 drill material grading 103
11.1 Overview 103
103 11.2 drill pipe material properties testing
11.3 Classification of drill pipe material quality 103
11.4 rod material quality level marker 104
Appendix A (normative) Manufacturer (OEM) requirements 105
Appendix B (normative) Product and service level requirements and additional testing 106
Annex C (normative) 116 International Units Tab
Annex D (informative) 149 US customary units watchmaking
Appendix E (normative) Guidelines detection level 181
Annex F (normative) Patent drill string threaded connection detection 184
Annex G (informative) detector 187 is connected with the work string threaded patent
Annex H (normative) drill pipe material quality grading 189
Annex I (informative) drill pipe material macrostructure etching Test Method 191
Appendix J (normative) drill stem testing cycle member 193
References 194
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is used to redraft the law revision using ISO 10407-2.2008 "oil and gas industries - Rotary drilling equipment - Part 2.
With inspection and grading drill string member "(in English).
This standard 10407-2 ISO .2008 compared to the structure, increasing the Chapter 11, Appendix H, Appendices I and J.
This standard and ISO 10407-2.2008 main technical differences are as follows.
--- Description and increased testing requirements for wear with cracks (see 10.59);
--- Increase the drill pipe material grade identification method (see 8.5);
--- Increasing the quality of materials and test grading drill material (see Chapter 11);
--- An increase of some domestic tool manufacturers' code (see Table B.17);
--- Increased normative appendix "drill pipe material quality classification" (see Appendix H);
--- Increase the informative appendix "drill pipe material macrostructure etching test methods" (see Appendix I);
--- Increased normative appendix "drill stem testing cycle component" (see Appendix J).
This standard also includes the following editorial changes.
--- By decimal points instead of ISO 10427-2.2008 as the original decimal comma ","; "."
--- Use the "standard" instead of "this International Standard";
--- Standard name changed to "oil and gas industry with inspection and grading drill string member."
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) centralized.
This standard drafting unit. China Academy of Engineering CNPC oil pipe, Igawa Drilling Company drilling Changqing, Tarim Oilfield points
the company.
The main drafters of this standard. Wang Xinhu, Li Fang slope, giant western China, Fang Wei, Liu Yonggang, Lu Qiang, Song Shunping.
Oil and Gas Industry
With drill testing and grading member
1 Scope
This standard specifies the use of the drill string member of each detection level testing requirements and test procedures. Drillstring components covered by this standard include drill
Rod tube, drill pipe joints, rotary shouldered connections, drill collars, drill pipe and drill string member aggravating both ends. This standard specifies the methods commonly used to detect
And technology.
The standard method is intended to provide guidance for inspection and testing, organization or individual does not limit the use of other techniques for testing.
This standard specifies the testing personnel qualification, describes the detection method and apparatus of various detection methods of calibration and verification procedures. The standard
Quasi also include evaluation of the defect has been detected and identified requirements for drill string member.
This standard provides the minimum requirements for the manufacturer and its detection in Appendix A special tool.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 10424-1 oil and gas industries - Rotary drilling equipment - Part 1. Rotary drill string member (Petroleumandnatural
gasindustries-Rotarydrilingequipment-Part 1. Rotarydrilstemelements)
ISO 11961 Oil and Gas Industry Steel drill (Petroleumandnaturalgasindustries-Steeldrilpipe)
APIRP7A1 rotary shouldered threaded connection fat test (Testingofthreadcompoundforrotaryshouldered
connections)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Inspection agency agency
Inspection contract signed in accordance with regulations and standards testing methods in Institutional drill string member.
3.2
A- Scan A-scan
Ultrasonic flaw detector oscilloscope screen with a horizontal axis represents the ultrasonic propagation distance or time, a display method using the vertical axis represents the amplitude of the reflected wave.
3.3
Bending strength than the bending-strengthratio
BSR
Location section modulus ratio of final engagement and external threads.
3.4
Chamfer diameter beveldiameter
Rotating outside diameter shoulder contact surfaces.
|