|
US$699.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43673-2024: Non-metallic composite coiled tubing with embedded cable
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43673-2024 | English | 699 |
Add to Cart
|
6 days [Need to translate]
|
Non-metallic composite coiled tubing with embedded cable
| Valid |
GB/T 43673-2024
|
PDF similar to GB/T 43673-2024
Basic data | Standard ID | GB/T 43673-2024 (GB/T43673-2024) | | Description (Translated English) | Non-metallic composite coiled tubing with embedded cable | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 34,346 | | Date of Issue | 2024-03-15 | | Date of Implementation | 2024-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43673-2024: Non-metallic composite coiled tubing with embedded cable---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75.180.10
CCSE92
National Standards of People's Republic of China
Non-metallic cable-laid composite coiled tubing
Released on 2024-03-15
2024-07-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms, definitions and abbreviations 2
3.1 Terms and Definitions 2
3.2 Abbreviations 4
4 Product Description 4
4.1 Tube structure 4
4.2 Connector device 5
4.3 Product Code 5
5 Materials 6
5.1 Lining layer 6
5.2 Reinforcement layer and tensile layer 6
5.3 Outer sheath 7
5.4 Connectors 7
5.5 Power cables, signal cables and auxiliary heating cables 7
5.6 Optical Fiber 7
6 Technical Requirements 7
6.1 General 7
6.2 NPR 7
6.3 TLR 7
6.4 WTR 7
6.5 MOP 8
6.6 Length 8
6.7 Appearance Quality 8
6.8 Dimensions, NPR, TLR and MBR 8
6.9 Physical and chemical properties 9
6.10 Electrical properties 10
6.11 Heating performance 10
6.12 Full roll pressure test 10
7 Test methods 10
7.1 Sample state adjustment 10
7.2 Appearance Quality 11
7.3 Specifications and dimensions 11
7.4 Compression cracking stability 11
7.5 Short-term hydrostatic strength 11
7.6 Short-term burst pressure 11
7.7 Tensile properties 11
7.8 Collapse strength 11
7.9 Axial elongation at NPR 11
7.10 MBR 11
7.11 1000h survival test 11
7.12 Rapid pressure relief 12
7.13 Short-term cycle pressure 12
7.14 Conductor resistance 12
7.15 Insulation resistance 12
7.16 Withstand voltage 12
7.17 Heating 12
7.18 Full roll pressure test 12
8 Inspection Rules 12
8.1 Inspection categories 12
8.2 Factory Inspection 12
8.3 Type test 13
9 Marking, packaging, transportation and storage 14
9.1 Sign 14
9.2 Packaging 14
9.3 Transportation14
9.4 Storage 14
10 Installation14
Appendix A (Informative) Chemical resistance 15
Appendix B (Informative) Test method for gas permeability of polymer materials 18
Appendix C (Normative) Collapse Strength Test Method 20
Appendix D (Informative) Test method for axial elongation under pressure 22
Appendix E (Informative) Cable Pipe Installation Notes 24
Reference 28
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is under the jurisdiction of the National Technical Committee on Petroleum and Natural Gas Standardization (SAC/TC355).
This document was drafted by. China National Petroleum Corporation Engineering Materials Research Institute Co., Ltd., Shanghai Feizhou Boyuan Petroleum Equipment Co., Ltd.,
Weihai Hongtong Pipe Co., Ltd., Cangzhou Mingzhu Plastic Co., Ltd., China National Petroleum Corporation Changqing Oilfield Branch
Company, China National Petroleum Corporation Exploration and Development Research Institute, Hebei Yutong Special Hose Co., Ltd., Shaanxi Aerospace Delin Technology Group
GROUP LIMITED.
The main drafters of this document are. Li Houbu, Ding Nan, Li Minli, Lian Hongzheng, Yang Feng, Gan Qingming, Ming Eryang, Zhang Peng, Feng Guojing, Yu Zhimeng,
Yang Haitao, Wu Pan, Li Xingwei, Fang Wei, Wei Bin, Ji Zhenning, Li Zhaoyong, Lin Benchang.
Non-metallic cable-laid composite coiled tubing
1 Scope
This document specifies the product description, materials, technical requirements, test methods, and
Methods, inspection rules, marking, packaging, transportation, storage and installation.
This document is applicable to cable pipes used for artificial lifting or water injection in vertical wells, directional wells, horizontal wells and other underground wells.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL)
GB/T 2918 Standard environment for conditioning and testing of plastic specimens
GB/T 3048.4 Test methods for electrical properties of wires and cables Part 4.Conductor DC resistance test
GB/T 3048.5 Test methods for electrical properties of wires and cables Part 5.Insulation resistance test
GB/T 3048.8 Test methods for electrical properties of wires and cables Part 8.AC voltage test
GB/T 3956 Cable conductors
GB/T 6111 Determination of the resistance to internal pressure of thermoplastic piping systems for fluid transportation
GB/T 8162 Seamless steel tube for structural use
GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics
GB/T 8806 Determination of dimensions of plastic parts for plastic piping systems
GB/T 9771.1 Single-mode optical fibre for communication Part 1.Characteristics of dispersion-free single-mode optical fibre
GB/T 12357.1 Multimode optical fibre for telecommunications Part 1.Characteristics of category A1 multimode optical fibre
GB/T 13657 Bisphenol A epoxy resin
GB/T 14976 Seamless stainless steel pipe for fluid transportation
GB/T 15560 Hydraulic instantaneous burst and pressure resistance test methods for plastic pipes for fluid transportation
GB/T 18252 Plastic piping systems - Determination of the long-term hydrostatic strength of thermoplastic materials in the form of pipes by extrapolation
GB/T 18369 Glass fiber roving
GB/T 18475 Material classification and designation for thermoplastic pressure pipes and fittings - Overall use (design) factors
GB/T 18992.2 Cross-linked polyethylene (PE-X) piping systems for hot and cold water Part 2.Pipes
GB/T 26752 Polyacrylonitrile-based carbon fiber
GB/T 34903.1 Petroleum, petrochemical and natural gas industries Non-metallic materials in contact with media related to oil and gas production Part 1.
Thermoplastics
FZ/T 54076 Para-aramid (1414) filament
JB/T 5331 Special polyimide film wrapped round copper wire for submersible motors
JB/T 13484 Rated voltage 0.6/1kV fluoroplastic insulated power cable
SY/T 6662.2 Non-metallic composite pipes for petroleum and natural gas industries Part 2.Flexible composite high-pressure transmission pipes
SY/T 6794-2018 Coilable reinforced plastic line pipe
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43673-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43673-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43673-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43673-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|