|
US$2439.00 · In stock
Delivery: <= 11 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29166-2021: Petroleum and natural gas industries - Steel drill pipe
Status: Valid GB/T 29166: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29166-2021 | English | 2439 |
Add to Cart
|
11 days [Need to translate]
|
Petroleum and natural gas industries - Steel drill pipe
| Valid |
GB/T 29166-2021
|
| GB/T 29166-2012 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Petroleum and natural gas industries -- Steel drill pipe
| Obsolete |
GB/T 29166-2012
|
PDF similar to GB/T 29166-2021
Basic data | Standard ID | GB/T 29166-2021 (GB/T29166-2021) | | Description (Translated English) | Petroleum and natural gas industries - Steel drill pipe | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H48;E92 | | Word Count Estimation | 122,190 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 29166-2012: Petroleum and natural gas industries -- Steel drill pipe---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries. Steel drill pipe
ICS 75.180.10
E92
National Standards of People's Republic of China
Steel drill oil and gas industry
(ISO 11961.2008, MOD)
Issued on. 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
Consistency 1 2
2.1 Normative references 1
2.2 Unit 1
3 Normative references 2
4 terminology, definitions, symbols and abbreviations 3
4.1 Terms and definitions 3
4.2 Symbols and Abbreviations 7
9.00 order drill data to be provided 5
6 drill claim 10
6.1 General 10
6.2 size, quality and connection 10
6.3 Material requirements 11
6.4 Manufacturing Process 12
6.5 Traceability 13
6.6 General inspection and testing --- 13
6.7 Weld Test 14
6.8 Tensile Test 14
6.9 Hardness Test 15
6.10 Charpy V-notch impact test 15
6.11 Transverse side bend test 16
6.12 drill pipe imperfections and defects 17
Exterior 6.13 17 drill pad test
6.14 NDT weld zone 17
6.15 mark 19
6.16 drill pipe manufacturer of the device to configure the minimum requirements 20
6.17 documentation requirements 20
Claim 7 drill pipe body 20
7.1 Information required to order drill pipe body 20
7.2 size and quality requirements 21
7.3 Material requirements 22
7.4 Manufacturing Process 23
7.5 Traceability 24
7.6 General inspection and testing --- 24
7.7 Analysis of the chemical composition of 24
7.8 Tensile Test 25
7.9 Charpy V-notch impact test 26
7.10 drill pipe wall thickness 27
7.11 length of drill pipe body 27
7.12 thickened within 27
7.13 internal shape 27
7.14 straightness 27
7.15 thickened portion 28 coaxial
Weighing 28 7.16
Imperfections and defects drill pipe body 28 7.17
Exterior 7.18 drill pipe body inspection 28
7.19 NDT 29
7.20 mark 31
7.21 drill pipe body manufacturer device configuration minimum requirements 32
7.22 documentation requirements 32
Claim 8 of 33 drill pipe joints
8.1 Information required to order drill pipe joints 33
8.2 size requirements 34
8.3 Material requirements 34
8.4 Manufacturing Process 35
8.5 Traceability 35
8.6 General inspection and testing --- 36
8.7 Analysis of the chemical composition of 36
8.8 Tensile Test 36
8.9 Hardness Test 37
8.10 Charpy V-notch impact test 38
8.11 imperfections and defects 39
8.12 NDT 39
8.13 mark 40
8.14 drill pipe joints manufacturer of the device configuration minimum requirements 40
8.15 documentation requirements 40
Appendix A (normative) 42 international units watchmaking
Appendix B (normative) International System of Units (USC units) 59
Annex C (normative) US customary units Tab 71
Annex D (normative) purchased 88 square test
Appendix E (normative) Supplementary requirements 89
Annex F (informative) USC units converted to SI units Method 91
Annex G (informative) product specification level 94
Appendix H (Informative Appendix) API Monogram 96
References 97
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted Law Amendment uses ISO 11961.2008 "Steel drill oil and gas industry" (in English).
This standard and ISO 11961.2008 main technical differences are as follows.
--- Part Normative documents by the respective national standards replaced.
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) centralized.
This standard drafting unit. China Academy of Engineering CNPC oil pipe, Baoshan Iron & Steel Co., the Tarim Oilfield Company,
Shanxi wind and thunder North Industries Group Limited.
The main drafters of this standard. Ge Mingjun, Fang Wei, Qu Yi Xin, Yang force and energy, Zhao, Marv PROTECTION.
Steel drill oil and gas industry
1 Scope
This standard specifies the steel industry, oil and gas drilling and production operations using the tubular body and having a drill pipe welded joints thickened ends
Drill pipe supply system technical conditions, the steel drill pipe is divided into three product specification level (PSL-1, PSL-2 and PSL-3). Want to PSL-1
Demand is the basic requirement of this standard. Appendix G provides PSL-2 and PSL-3 different levels of standard technical requirements.
This standard includes the following drill steel grade.
--- E grade drill pipe;
--- High Strength Drill Pipe, X, G and S grade.
Figure B.1 shows a typical drill pipe structure, and mark the main components and length. Main dimensions and quality of each steel grade drill pipe
The amount of the international system of units (see Table A.1) and USC units (see Table C.1) gives the two systems.
This standard can also be used for drill pipe tool joints with ISO standard API or unspecified.
After consultation with the manufacturer and purchaser, this standard is also applicable to other sizes of drill pipe body and (or) the tool joint. This standard lists the test
Inspection, non-destructive testing and performance verification of additional requirements (see Appendix E), these additional requirements may be negotiated between purchaser and manufacturer selection.
This standard does not consider the use of performance.
Note 1. In this standard, the drill pipe is code 1, code 2, grade (E, X, G and S), and thicker type rotary shouldered connection type materials named. This
These names are used for identification when ordering.
Note 2. The detailed requirements for the processing of drill pipe joint thread may refer to GB/T 22512.2 or APISpec7-2.
Note 3. The performance drill can refer APIRP7G.
2 Conformance
2.1 Normative References
Normative references listed in Section 3, and the contents of its associated requirements (API), American Society for Testing and Materials and the American Petroleum Institute
(ASTM) relevant documents and American National Standards Institute (ANSI) to develop interchangeable. These files behind ISO file, and
Plus "or" such as "ISO ×××× or API ××××" on its front. This way replace the files listed using the previous
ISO file may lead to different results. However, two results are acceptable, so in actual use of these documents are considered to be
In interchangeable.
2.2 units of measurement
In this standard, data is the International System of Units (SI) and USC units (USC) represented by the two systems. International Units
Data tables and USC units are represented in Appendix A and Appendix C. Figure given in Appendix B, which data IU
SI and USC units represent the two systems. Orders for a particular project, only require the use of a system of units, with no need to give
Other units of the data represented.
Regulate the production of these products according to any one of the units represented by the units should be considered equivalent and interchangeable. Therefore, in line with
Expressed in one system of the requirements of this product must also comply with the other units expressed.
In the text, the SI units in parentheses after the data for the data USC units units.
NOTE. Appendix F gives USC units converted to SI units method for reference.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29166-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 29166-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 7 ~ 11 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29166-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29166-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 29166-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29166-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|