| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29082-2012 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Storage requirements for satellite
| Valid |
GB/T 29082-2012
|
PDF similar to GB/T 29082-2012
Basic data | Standard ID | GB/T 29082-2012 (GB/T29082-2012) | | Description (Translated English) | Storage requirements for satellite | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V71 | | Classification of International Standard | 49.020 | | Word Count Estimation | 9,974 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the technical requirements for satellite storage and management requirements. This standard applies to the entire Star satellite model development, general electronic equipment, electrical equipment, optical equipment, solar array, | GB/T 29082-2012: Storage requirements for satellite---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Storage requirements for satellite
ICS 49.020
V71
National Standards of People's Republic of China
Satellite storage requirements
Issued on. 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Aerospace Science and Technology Corporation.
This standard by the National Aerospace Technology and Application of Standardization Technical Committee (SAC/TC425) centralized.
This standard was drafted. Shanghai Institute of Satellite Engineering.
The main drafters of this standard. Zong Yi Yan, Lin Xiaoyan, Wei Xifeng Wu Dong, Yu Xiaochen.
Introduction
This standard belongs to China Aerospace national standards. China Aerospace national standards applicable to national standards in the field of aerospace and revision
Management, covering the management of space, space technology, space applications and services of the three fields, is to guide spacecraft and launch vehicle project management, engineering research
System, space launch services, in-orbit satellite applications based activities.
With the development of satellite bus platform technology, on-board equipment, components, subsystems and even gradually promote the product of work, on the part of the star device
Backup from the concept of one single star can be changed to a backup for multi-Stars even more star-to-many or many backups.
At the same time, due to the need of the satellite network, the star product is gradually developing to small batch production. So there will be more and more products facing a long-term
Storage problems. Moreover, in the face of sudden disaster or emergency, the need in the shortest time will be stored in the ground in launching satellites into orbit
Instead, supplement or perform related tasks. This strategy demands an urgent need for safe storage and reliable storage of satellite products. Therefore, in order to gauge
Ground storage operating range, satellite products to guide and improve the product under the specified storage conditions, within the prescribed period of time, keep the product specified functions
Ability, and satellite products due to improper storage of adverse effects (or loss) to minimize the need to develop satellite storage requirements
specification.
This standard is in the comb, sum up experience domestic satellite models store and work, based on the results and lessons learned, to explore a set of
Comprehensive, systematic and effective service to our current and future models of the satellite storage specifications.
As the satellite model of diversity and complexity, not to encourage the requirements in the standard model developed to intact copy of the contract,
But it should be based on the specific characteristics of the development model, the standard cut, selection criteria applicable provisions and requirements of these provisions
Proper application, restricted or relax these requirements, they will be incorporated into a formal purchase contract or research file, you must fulfill to become
Seeking to make it more cost-effective services in the models.
Satellite storage requirements
1 Scope
This standard specifies the technical requirements for satellite storage and management requirements.
This standard applies to the development of the satellite model the entire star, general electronic equipment, electrical equipment, optical equipment, solar array, moving parts, and more
Layer insulation components and other products stored in the ground.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Parallel storage member paralelstoragespecimen
In the product during storage optical equipment, solar array, moving parts, etc., for the synchronization control products for storage environment, storage life Min
The key characteristic sense of parameters and products simultaneously stored specimens.
3 General requirements
3.1 Product Development and Tasks shall in product development task book clearly product storage requirements, Cheng Zhifang, consumer be required to enter the implementation capacity
Storage products.
3.2 points for storage the entire star satellite placed directly in storage in the plant (the plant storage) and satellite placed in a special storage box (Jane
Said storage box) two. More than three months of storage containers should be used for storage.
3.3 storage device class products generally have the following four ways.
a) nitrogen packaging and storage. placed in a special box storage, tank filling high purity nitrogen (Qualified), and maintain a positive pressure;
b) Nitrogen bags and storage. anti-static plastic bag, the air bag replaced with high purity nitrogen (Qualified), and sealed, placed in
Special package contents;
c) evacuation and storage. anti-static plastic packaging, vacuum sealed and placed in a special box;
d) desiccant and storage. After anti-static plastic bag placed in a special box, as required desiccant.
Equipment products in accordance with the product characteristics required to select the appropriate storage, the general should be used 3.3a) ~ 3.3c) storage mode.
3.4 anti-static bag, put the water content in the box not more than 4% of the silica gel desiccant or molecular sieve desiccant with gauze wrapped in packaging
Humidity indicator paper bag use, 24h after check to make sure the package to meet the requirements of relative humidity, before entering the storage program.
3.5 General parallel storage member selected from the same batch of product or part of the component. Parallel storage elements during storage retest requirements from product design
Division determined based on product characteristics and environmental characteristics.
3.6 storage for different ways and different products to set environmental conditions.
3.7 product storage period should be required to complete periodic inspection and retest work.
3.8 product storage period should be required to complete the corresponding tests.
3.9 Treasury, there should be no material impact of strong electromagnetic fields and radiation in the plant, there should be no corrosive liquids and gases.
|