|
US$94.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29049-2012: Door sets -- Vertical load test
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29049-2012 | English | 94 |
Add to Cart
|
3 days [Need to translate]
|
Door sets -- Vertical load test
| Valid |
GB/T 29049-2012
|
PDF similar to GB/T 29049-2012
Basic data | Standard ID | GB/T 29049-2012 (GB/T29049-2012) | | Description (Translated English) | Door sets -- Vertical load test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P32 | | Classification of International Standard | 91.060.50 | | Word Count Estimation | 5,553 | | Quoted Standard | GB/T 5823 | | Adopted Standard | ISO 8275-1985, IDT | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the full tang door in the open condition, the vertical load is applied on the door produced by deformation measurement methods. This standard applies to the normal use made ??of various materials with vertically hinged door jamb en | GB/T 29049-2012: Door sets -- Vertical load test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Doorsets. Vertical load test
ICS 91.060.50
P32
National Standards of People's Republic of China
Entire door jamb vertical load test
(ISO 8275. 1985, IDT)
Issued on. 2012-12-31
2013-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 8275. 1985 "the entire door jamb vertical load test" for ease of use, made under this standard
Column editorial changes.
--- Remove the ISO 8275. 1985 Foreword;
--- "This International Standard" be replaced by "of this standard."
The standard proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China.
This standard by the national building curtain wall windows and doors Standardization Technical Committee (SAC/TC448) centralized.
This standard is drafted by. Guangdong Provincial Academy of Building Research.
Participated in the drafting of this Standard. China Academy of Building Research, National Building Materials Industry Building Hardware Plumbing Products Quality Supervision, Inspection and testing
Test Center, Shanghai Jianke Inspection Limited Shenzhen Johor Bahru Curtain Technical Advisory Co., Ltd., Guangzhou Aluminium Decoration Engineering Co., Ltd., Guangdong
Kennedy Long Metal Products Co., Ltd., Guangdong Hopewell Construction Hardware Co., Ltd., Zhongshan Shengxing Co., Ltd., Guangdong record high walls
Doors and windows Engineering Co., Ltd., Chongqing Jiayu Fenestration Engineering Co., Ltd., Wuhan Hong Kong and Technology Co., Ltd..
The main drafters of this standard. Wang Xinxiang, Wang Yuanguang, Kenneth Lee, Shi Man Cheung, Wang Hongtao, Deng Guizhi, Xu Qin, including Yi, LI Ning, Li Baojun,
Liu Xuelin, Jiang Qinghai, flood pool, Zhou Xiaoyang, Li Jinggang.
Entire door jamb vertical load test
1 Scope
This standard specifies the entire door jamb in the open condition, deformation measurements generated by applying a vertical load on the door.
This standard applies to vertical load test with vertical hinged door jamb whole in normal use by a variety of materials. So normal
With state refers to the entire door jamb, as recommended by the manufacturer according to the actual status of the proposed design and installation, and meet the criteria specified in this
Test conditions.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5823 building windows and doors term
3 Terms and Definitions
Terms and definitions doors GB/T 5823 defined apply to this document.
4 Test principle
At the top of the door leaf is applied to a specified location vertical static load, measured leaf deformation in the vertical plane.
5 test device
Mounting the specimen support means to be sufficiently rigid, and can withstand the test load will not cause the specimen box, the binding site of the fan
Damage or deformation of the specimen bending stress. If the installation conditions are known, where feasible, the specimen should simulate installation conditions into
Line installation.
6 Test procedure
The doors open to 45 ° or 90 ° and the deformation measuring device installed in door locks on the doors at the corner section at the side edges, and record the initial reading
Number, accurate to 0.1mm (see Fig. 1).
In the upper corner of the door locks on the side away from the top edge of the vertical static load applied at 50mm F, or load shall be determined in accordance with the respective gate performance standards
Predetermined intended use. In the loading position (see FIG. 1) remains load 15min. When loading, the deformation of the recording device readings, unloading
Re-recording readings contained 3min.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29049-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29049-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29049-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29049-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|