|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29036-2012: Coloring of stainless steel by Oxidation -- Specification and test methods
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29036-2012 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Coloring of stainless steel by Oxidation -- Specification and test methods
| Valid |
GB/T 29036-2012
|
PDF similar to GB/T 29036-2012
Basic data | Standard ID | GB/T 29036-2012 (GB/T29036-2012) | | Description (Translated English) | Coloring of stainless steel by Oxidation -- Specification and test methods | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A29 | | Classification of International Standard | 25.220.40 | | Word Count Estimation | 10,163 | | Quoted Standard | GB/T 3138; GB/T 4156; GB/T 10125; GB/T 12334; GB/T 12609; GB/T 12967.2; GB/T 12967.4; GB/T 20878; ISO 16348 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the stainless steel surface oxidation coloring of the technical requirements, test methods and inspection rules. This standard applies by chemical or electrochemical method for stainless steel plates, profiles and workpiece colorin | GB/T 29036-2012: Coloring of stainless steel by Oxidation -- Specification and test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coloring of stainless steel by Oxidation. Specification and test methods
ICS 25.220.40
A29
National Standards of People's Republic of China
Stainless steel surface oxidation coloring
Technical specifications and test methods
Issued on. 2012-12-31
2013-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 demand-side information provided to suppliers 2
5 2 matrix state
6 Coloring 2
6.1 Before coloring treatment 2
6.2 coloring treatment 2
6.3 shading 3
7 Requirements 3
3 7.1 Appearance
7.2 Corrosion Resistance 3
7.3 UV-resistant properties 3
7.4 Heat resistance 3
7.5 wear 3
7.6 crack resistance 3
8 sampling 4
9 Test report 4
Appendix A (informative) stainless steel colored film stripping process is typically 5
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Machinery Industry Federation.
This standard layer Standardization Technical Committee (SAC/TC57) administered by the National Metal and non-metal cover.
This standard is drafted by. Guangdong Dazhi Environmental Protection Technology Co., Ltd., Wuhan Institute of Material Protection, Taiyuan Steel City enterprises.
The main drafters of this standard. De-Zhong Zhang, Mr Choi, new JIA Jian, Fan Hung St., Wangxi Hong, Lee is, Zhong Li Chang.
Introduction
Stainless steel surface by a chemical or electrochemical method for forming an oxide film in a specific solution, the oxide film of different thickness because visible light dry
Browse behavior can get different colors. In this color processing, stainless steel can get a variety of colors. Fresh colored stainless steel color
Yan, elegant appearance, commonly used in construction and decoration, hardware accessories and solar absorbers and other industries.
Chemical method generally refers to stainless steel was immersed in an aqueous solution containing a specific coloring process chemicals carried in the process of generation of INCO
table. Chemical method is not affected by the shape of the workpiece, and uniform coloring color, is the most commonly used stainless steel industrial coloring. Chemical coloring
Quality also depends on the stability of stainless steel grades, surface condition of the workpiece and the colored liquid process conditions. Color reproducibility by the
Color potential of control.
Advantages electrochemical method is the color of good controllability and reproducibility, little affected by the surface condition of stainless steel, and low processing temperature. because
This, and its industrial application gradually attention.
Austenitic stainless steel suitable for chemical coloring, after coloring can get a satisfactory color appearance and good corrosion resistance; due to the ferritic
Stainless steel corrosion tendency in coloring solution, was inferior to austenitic stainless steel bright color; the corrosion resistance of low chromium high carbon martensitic stainless steel
Can poor, you can only get dark color, or to obtain a black surface.
Stainless steel surface oxidation coloring
Technical specifications and test methods
Warning. This standard requires some substances and/or processes used, if appropriate measures are not taken, would be a health hazard. This standard
We did not discuss any health hazards, safety or environmental matters and the use of standard regulations involved in the process. Producers, demand-side and/or standards to make
With those who are responsible for establishing appropriate health, safety and environmental regulations and to take appropriate measures to comply with national, local and/or international laws and regulations
Regulatory requirements. Compliance with this standard does not mean immunity from legal obligations.
1 Scope
This standard specifies the technical requirements, test methods and inspection rules of the stainless steel surface oxidation coloring.
This standard applies to chemical or electrochemical oxidation colored stainless steel sheet, profiles and the workpiece, the high temperature oxidation of stainless steel
You can also refer to the use of color.
This standard does not apply to the use of other means of colored stainless steel, such as ion deposition, vapor deposition, organic coating and the like.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3138 metal plating and chemical treatment and related process
Erichsen cupping test GB/T 4156 Metallic materials - Sheet and strip -
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB/T 12334 Metallic and other inorganic coatings thickness measurement definitions and general rules
GB/T 12609 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection
GB/T 12967.2 anodized aluminum and aluminum film detecting method - Part 2. Determination of the anodic oxide film with an abrasive wheel wear tester
Abrasion and wear resistance coefficient
Determination of GB/T 12967.4 colored anodized aluminum and aluminum anodized film resistant to ultraviolet light
GB/T 20878 stainless steel and heat-resistant steel grades and chemical composition
ISO 16348 Metallic and other inorganic coatings appearance definitions and idioms (Metalicandotherinorganiccoat-
ings-Definitionsandconventionsconcerningappearance)
3 Terms and Definitions
GB/T 3138, GB/T 12334 and ISO 16348 define the following terms and definitions apply to this document.
3.1
Chemical coloring chemicalcoloring
Stainless steel immersed in an aqueous solution containing specific chemicals, making stainless steel surface oxidation coloring process to form an oxide film.
3.2
Electrochemical coloring electrochemicalcoloring
Stainless steel immersed in an aqueous solution containing a specific chemical substances, by applying current to the stainless steel surface oxidation occurs to form an oxide
The method of coloring the film.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29036-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29036-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29036-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29036-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|