|
US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28892-2024: Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
Status: Valid GB/T 28892: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28892-2024 | English | 214 |
Add to Cart
|
3 days [Need to translate]
|
Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
| Valid |
GB/T 28892-2024
|
| GB/T 28892-2012 | English | 959 |
Add to Cart
|
3 days [Need to translate]
|
Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
| Obsolete |
GB/T 28892-2012
|
PDF similar to GB/T 28892-2024
Basic data | Standard ID | GB/T 28892-2024 (GB/T28892-2024) | | Description (Translated English) | Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G04 | | Classification of International Standard | 71.040.40 | | Word Count Estimation | 10,124 | | Date of Issue | 2024-03-15 | | Date of Implementation | 2024-07-01 | | Older Standard (superseded by this standard) | GB/T 28892-2012 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 28892-2024: Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 71.040.40
CCSG04
National Standards of People's Republic of China
Replaces GB/T 28892-2012
Surface chemical analysis X-ray photoelectron spectroscopy
Select the statement of instrument performance parameters
(ISO 15470.2017, IDT)
Released on 2024-03-15
2024-07-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 1
5 Select the description of instrument performance parameters 1
5.1 Analytical methods 1
5.2 Sample 1
5.3 System Configuration 1
5.4 X-ray sources 2
5.5 Spectrometer Intensity Performance and Energy Resolution 2
5.6 Spectrometer Energy Scale 2
5.7 Spectrometer Intensity Linearity 2
5.8 Spectrometer response function 2
5.9 Imaging and Region Resolution 2
5.10 Charge Neutralization 3
5.11 Variable Angle XPS 3
5.12 Vacuum Environment 4
References 5
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB/T 28892-2012 "Table of performance parameters for selected instruments for surface chemical analysis X-ray photoelectron spectroscopy"
Compared with GB/T 28892-2012, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2012 edition);
b) Method 2 has been changed (see 5.9.3, 5.9.3 of the.2012 edition).
This document is equivalent to ISO 15470.2017 "Table of performance parameters for selected instruments for surface chemical analysis using X-ray photoelectron spectroscopy"
"Statement".
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Microbeam Analysis Standardization Technical Committee (SAC/TC38).
This document was drafted by. Xiamen Heqing Education Consulting Co., Ltd. and Xiamen University.
The main drafters of this document are. Tang Dingliang, Li Jianhui, Xu Fuchun, Cen Danxia, Liu Fen, and Wang Shuiju.
The previous versions of this document and the documents it replaces are as follows.
---GB/T 28892-2012;
---This is the first revision.
Introduction
There are many manufacturers of X-ray photoelectron spectrometers around the world. Although the basic principle of XPS analysis method is the same for each instrument
Although the specific design of instruments and the way in which their performance is described vary, it is often difficult to compare the performance of instruments produced by different manufacturers.
This document provides a basic list of items so that all X-ray photoelectron spectrometers can be described in a common way.
Manufacturer's instructions, which can be 30 pages long or more. This document is intended to make certain items identified in the manufacturer's instructions more specific.
Have consistent and clear meaning.
Surface chemical analysis X-ray photoelectron spectroscopy
Select the statement of instrument performance parameters
1 Scope
This document describes a method for expressing specific performance parameters of X-ray photoelectron spectrometers.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
Note. GB/T 22461.1-2023 Vocabulary for surface chemical analysis Part 1.General terms and spectral terms (ISO 18115-1.2013, IDT)
GB/T 22461.2-2023 Vocabulary for surface chemical analysis Part 2.Terminology for scanning probe microscopy (ISO 18115-2.2021, MOD)
3 Terms and definitions
For the purpose of this document, the terms and definitions defined in ISO 18115 (all parts) apply.
4 Abbreviations
The following abbreviations apply to this document.
5.Select the description of instrument performance parameters
5.1 Analysis methods
The methods used to obtain information from the samples should be briefly described, and alternative analytical techniques should be described for the system under consideration.
5.2 Samples
The sample sizes and shapes that can be analyzed by the instrument under normal operation should be given.
If there are restrictions on sample size or shape (such as measurement of peripheral volume, etc.), they should be explained in detail.
5.3 System composition
The design geometry and tolerances of the important analysis components of the system should be described.
Example. Angle tolerance is often ±1°.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28892-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 28892-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28892-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28892-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 28892-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28892-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|