|
US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28028-2011: Criteria for assessing and coding of the commutation of rotation electrical machines for traction
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28028-2011 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Criteria for assessing and coding of the commutation of rotation electrical machines for traction
| Valid |
GB/T 28028-2011
|
PDF similar to GB/T 28028-2011
Basic data | Standard ID | GB/T 28028-2011 (GB/T28028-2011) | | Description (Translated English) | Criteria for assessing and coding of the commutation of rotation electrical machines for traction | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | S35 | | Classification of International Standard | 29.280 | | Word Count Estimation | 21,268 | | Date of Issue | 2011-10-31 | | Date of Implementation | 2012-04-01 | | Quoted Standard | GB/T 25123.1-2010 | | Adopted Standard | IEC 60638-1979, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 15 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the natural disaster relief emergency response grading requirements, units and elements, methods and grade requirements. This standard applies to natural disaster relief emergency response conditions and measures division. | GB/T 28028-2011: Criteria for assessing and coding of the commutation of rotation electrical machines for traction
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Criteria for assessing and coding of the commutation of rotation electrical machines for traction
ICS 29.280
S35
National Standards of People's Republic of China
Traction motor reversing rotation and coding guidelines to assess the
(IEC 60638. 1979, MOD)
Issued on. 2011-10-31
2012-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
3.1 sparks and other luminous phenomena 1
3.2 commutator condition 2
3.3 Status brush 2
Informative features 4 code 2
Main features 5 2 assessment
6 Assessment Guideline 3
6.1 Evaluation criteria 3 sparks
6.2 Evaluation criteria commutator condition 3
6.3 Evaluation criteria brush condition 3
7 observed Rule 3
7.1 Observation 3 sparks
Check the commutator 4 7.2
7.3 brush inspection 4
Explanation 8 observation records 4
9 observed frequency 4
10 observations 4 Overview
10.1 Basic Principle 5 record
Record 10.2 observed 5
Record 11 sparks and burning point 5
Record 12 commutator Condition 6
Record 13 brush Condition 6
Example 7 14 Record
14.1 Spark observation 7
14.2 Check the commutator 7
14.3 brush inspection 7
Appendix A (informative) This standard and IEC 60638. 1979 technical differences and their reasons 14
Annex B (informative) observed sparks with variable opacity wedge 15
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the redrafted law revision adopted IEC 60638. 1979 "Traction motor reversing rotation direction evaluation and coding guidelines."
This standard and IEC 60638. 1979 technical differences exist, these differences involve the terms of the margin with a single vertical line (︱) into
Row marked. This standard and IEC 60638. 1979 technical differences and the reasons given in Appendix A.
This standard and IEC 60638. 1979 structural changes as follows, according to GB/T 1.1-2009 requirements, changing the original chapter number.
--- The standard adds Chapter 2, "Normative references";
--- The standard Chapter 3, Chapter 4, corresponding to the original;
--- The standard Chapter 4, corresponding to the description in Chapter 2;
--- The standard Chapter 5 corresponding to the original Chapter 3;
--- The standard Chapter 6 - Chapter 14, followed by the corresponding original Chapter 5 - Chapter 13;
--- Increase in Appendix A, the original Appendix A to Appendix B.
This standard also made the following editorial changes.
--- The original illustrations (actually a table) changed its name to the corresponding provisions of the corresponding section of the table, arranged in order of Tables 1 to 6, for ease of viewing
And comparing Tables 1 to 6 maintain their position unchanged; the original table I now table 7, on the back of Table 6;
--- IEC 60638. 1979 English page 19 (Chapter 11) in the penultimate line, "slotpitch (singleordouble)",
By comparison the French version, should be "polepitch (singleordouble)". The standard (Chapter 12) be amended to read "the pole pitch (single or double
Times the pole pitch) ";
--- IEC 60638. 1979, there is no clear its appendices "spark observed with variable opacity wedge" in nature. Given that Appendix
Content is not necessary to perform this standard will be identified as informative appendices.
The standard proposed by the People's Republic of China Ministry of Railways.
This standard by the national electric traction equipment and systems Standardization Technical Committee (SAC/TC278) centralized.
This standard is mainly drafted by. CSR Zhuzhou Electric Co., Ltd..
Participated in the drafting of this standard. new speed Yongji Electric Appliance Co., Ltd., Zhuzhou CSR Times Electric Co., Ltd.
The main drafters of this standard. Zhuli Xiang, Li Yifeng.
Participate drafters of this standard. Yuanzi Liang, Zhongyou Kang, Lu cited article.
Traction motor reversing rotation and coding guidelines to assess the
1 Scope
This standard applies to GB/T 25123.1 and has covered all motor cylindrical commutator.
This standard is to improve the following aspects GB/T 25123.1.
--- Commutation assessment criteria;
--- During the test should be defined to observe trials;
--- Detailed description of these observations for the recommended code.
This standard does not consider the traction motor slip ring.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 25123.1-2010 electric traction rail rolling stock and road vehicles rotating electrical machines - Part 1. In addition to the electronic converter
Fed alternating current motors except motors (IEC 60349-1.2002, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 sparks and other luminous phenomena
3.1.1
General spark ordinarysparks
Focused on a variety of spark brush edge (see Table 1 illustration).
3.1.2
Edge than proportionoftheedge
Refers observed in the brush holder, there generally spark edge length ratio of the brush and the brush of the total length, expressed as a percentage.
3.1.3
Spray-like spark shootingsparks
Slide out from the edge of the brush flying incandescent particles which form a continuous path, and showed a almost straight hair light (see Table 2
illustration).
3.1.4
Arcing streamers
Appears to change between adjacent sheets, and from the edge of the brush slide fly a certain distance of a small arc visible, they sent in a continuous light
The image presented on the commutator (see illustration 2).
3.1.5
Searing point glowingpoints
From dark red to incandescent spots appear on the surface near the edge of the brush (see illustration 3).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28028-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28028-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28028-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28028-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|