|
US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26144-2010: Liner fluoroplastics for flanged and wafer steel butterfly valve
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26144-2010 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Liner fluoroplastics for flanged and wafer steel butterfly valve
| Valid |
GB/T 26144-2010
|
PDF similar to GB/T 26144-2010
Basic data | Standard ID | GB/T 26144-2010 (GB/T26144-2010) | | Description (Translated English) | Liner fluoroplastics for flanged and wafer steel butterfly valve | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J16 | | Classification of International Standard | 23.060.99 | | Word Count Estimation | 16,149 | | Date of Issue | 1/14/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 150; GB/T 152.4; GB/T 699; GB/T 700; GB 1184-1996; GB/T 1220; GB/T 3280; GB/T 9113.1; GB/T 11373-1989; GB/T 12220; GB/T 12221; GB/T 12223; GB/T 12229; GB/T 12230; GB/T 13927; GB/T 17219; GB/T 23711.1; GB/T 23711.4; HG/T 2167; HG/T 2902; HG/T 2904; JB/T 106; JB/T 5300; JB/T 7927; JB/T 7928 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the form and structure of the clamp flange connection lining plastic spider valve atmosphere, technical requirements, materials, test methods, inspection rules, marking, painting, packaging and storage. This Standard is applicable to the flange and wafer Li atmosphere lined plastic spider valve system (hereinafter referred to as "probe valve spoon applicable conditions as follows: no more than nominal pressure PN16, nominal sizes DN50 --- DN1200; Applicable temperature of not more than 150 IC; . For medium to low LiJ degree of acid, alkali, salt and other corrosive gas or liquid medium is liquid, the flow rate in the fully open position of media channels is less than 3 m/s. | GB/T 26144-2010: Liner fluoroplastics for flanged and wafer steel butterfly valve---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Liner fluorplatics for flanged and wafer steel butterfly valve
ICS 23.060.99
J16
National Standards of People's Republic of China
Steel flange and wafer plastic lined butterfly
Issued on. 2011-01-14
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Machinery Industry Federation.
The standard valve by the National Standardization Technical Committee (SAC/TC188) centralized.
This standard was drafted. Shanghai decay Valve Group Co., Ltd., Hefei General Machinery Research Institute.
The main drafters of this standard. Xu Dingshun Hu away silver, Zhang Jiwei, Jianjun.
Steel flange and wafer plastic lined butterfly
1 Scope
This standard specifies the flange connection and the folder structure in the form of plastic lined butterfly on technical requirements, materials, test methods, inspection rules, marking
Chi, painting, packaging, storage and transportation.
This standard applies to the steel flange and wafer plastic lined butterfly (hereinafter referred to as "butterfly"). Applicable conditions are. Nominal little
In PN16, nominal size DN50 ~ DN1200; applicable temperature of not more than 150 ℃; suitable for medium to low viscosity acid, alkali, salt and other corrosive
Gas or liquid. When the medium is a liquid, the flow rate in the fully open position of media channels is less than 3m/s.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150 steel pressure vessels
GB 152.4 fastener hex head bolts and hex nuts sink hole
GB/T 699 high-quality carbon structural steel
GB/T 700 carbon structural steel
GB 1184-1996 shape and position tolerances without individual tolerance value
GB/T 1220 stainless steel rods
GB/T 3280 stainless steel cold-rolled steel sheet and strip
GB/T 9113.1 flat projection surface Integral steel pipe flanges
GB/T 11373-1989 thermal spraying metal surface pretreatment General
GB/T 12220 Universal Valve logo
GB/T 12221 metal valve structure length
Turn valve actuator connected to the GB/T 12223 Part
GB/T 12229 Universal valves carbon steel castings
GB/T 12230 Universal valves stainless steel castings
GB/T 13927 Industrial valves pressure test
GB/T 17219 in drinking water safety equipment and protective materials evaluation criteria
GB/T 23711.1 fluorine plastic lined pressure vessel spark test methods
Vacuum test method GB/T 23711.4 fluorine plastic lined pressure-resistant container
HG/T 2167 polychlorotrifluoroethylene resin
HG/T 2902 molded PTFE resin
HG/T 2904 and extrusion molding with poly FEP resin
JB/T 106 valves and painted signs
JB/T 5300 industrial valves material selection guidelines
JB/T 7927 valve castings appearance quality requirements
JB/T 7928 General Valve supply requirements
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26144-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26144-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26144-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26144-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|