GB/T 2613: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 2613-2008 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Electronic instrument general technical specification for industrial-process measurement and control system
| Obsolete |
GB/T 2613-2008
|
| GB/T 2613-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
DDZ-IIISeries process electronic control system--Operating signal
| Obsolete |
GB/T 2613-1989
|
PDF similar to GB/T 2613-2008
Basic data | Standard ID | GB/T 2613-2008 (GB/T2613-2008) | | Description (Translated English) | Electronic instrument general technical specification for industrial-process measurement and control system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N18 | | Classification of International Standard | 25.040 | | Word Count Estimation | 102,124 | | Date of Issue | 2008-07-02 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 11005.1-1989; GB/T 11005.2-1989; GB/T 11005.3-1989; GB/T 13637-1992; GB/T 14061-1993; GB/T 14062-1993; GB/T 14063-1993; GB/T 14065-1993; GB/T 14068-1993; GB/T 14069-1993; GB/T 2613-1989 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the DDZ-�� series electronic control of the calculator, regulator, distributor, indicator, recorder, totalizer, the ratio for a given device, barrier, Q-type operation, as well as the basic power box parameters, quality indicators and evaluation methods, and provides DDZ-�� series electric modular instrumentation used to transfer information between analog DC signal. | GB/T 2613-2008: Electronic instrument general technical specification for industrial-process measurement and control system
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electronic instrument general technical specification for industria-process measurement and control system
ICS 25.040
N18
National Standards of People's Republic of China
Replacing GB/T 2613-1989, etc.
Industrial process measurement and control systems
General technical conditions for the electric meter
Posted 2008-07-02
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅴ
Introduction Ⅵ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 signal specifications and parameters 3
4.1 signal 3
4.2 models, specifications 4
4.3 input and output parameters 7
9 4.4 normal operating conditions
4.5 Power 9
4.6 Explosion and signs 9
5 Technical Requirements 10
5.1 General technical requirements 10
5.2 other technical requirements 24
6 Test methods and inspection rules 29
6.1 Test conditions 29
6.2 Test Method 36
6.3 Inspection Rules 69
7 signs, packaging and storage 74
7.1 marks 74
7.2 Packaging 74
7.3 Storage 74
Appendix A (normative) Correction regulator differential time on 75 test results
Annex B (informative) About regulator amplitude-frequency characteristic example of FIG instructions 77
Annex C (normative) Instrumentation transport, transportation, storage and basic environmental conditions and test methods 79
Annex D (normative) industrial process measurement and control systems electric and pneumatic analogue method of evaluating the performance calculator 82
Figure 1 - Basic test with electrical wiring diagram (with DFP-2100 type, for example) 30
Figure 2 - Basic test indicator wiring diagram (DXD-1000 and DXZ1000 to type, for example) 30
Figure 3 - Basic test logger wiring diagram (in DXJ-1000 type, for example) 31
Figure 4 - Basic test totalizer wiring diagram (with DXS-2100 type, for example) 32
5 ratio for basic test wiring diagram (In Case DGB -3300) 33
Figure 6 - Basic test barrier wiring diagram (with DFA-1500 as an example) 34
Figure 7 Q-type manipulator Basic test wiring diagram (in DFQ-2000 as an example) 35
Figure 8 - Basic test power box wiring diagram (in DFY-1110 type, for example) 36
9 prescribing input resistance of the signal affect the test wiring diagram 37
10 regulator input resistance on the test signal wiring 38
11 distributor series mode interference test 42
12 with electrical amplitude-frequency characteristic example of FIG. 44
13 Totalizer series mode interference test wiring diagram 50
FIG. 14 is the ratio of the test series mode interference wiring diagram 55
FIG. 15 is the ratio of the amplitude-frequency characteristic example of FIG. 56
Figure 16 Barrier series mode interference test 59
17 Barrier amplitude-frequency characteristic example of FIG. 61
Figure 18 Barrier intrinsically safe circuit test wiring diagram 62 ratings
Figure 19 Barrier maximum allowable voltage test wiring diagram 62
Figure B. 1 PID regulator amplitude-frequency characteristic example of FIG. 78
Figure D. 1 common mode interference test wiring diagram 89
Figure D. 2 series mode interference test wiring diagram 89
Figure D. 3 output displacement test wiring diagram 91
Figure D. 4 Pressure - Flow Curve 91
Figure D. 5 frequency response curve of the example of Figure 93
Table 1 Operational signal range 3
Table 3 second load resistor
Table 3 calculator models, specifications 4
Table 4 regulator models, specifications 4
Table 5 with electrical models, size 5
Table 6 indicates the instrument type, size 5
Table 7 recorder models, size 5
Table 8 totalizer model, size 6
Table 9 ratio Type, size 6
Table 10 barrier type, size 6
Table 11 Q-type operator models, specifications 7
Table 12 power box type, size 7
Table 13 calculator input and output parameters 7
Table 14 regulator input and output parameters 7
Table 15 with electrical input and output parameters 8
Table 16 Totalizer input and output parameters 8
Table 17 is the ratio of input and output parameters 8
Table 18 barrier input and output parameters 9
Table 19 Q-type operator input and output parameters 9
Table 20 Calculator General technical requirements 10
Table 21 regulator General technical requirements 11
Table 22 distributor common technical requirements 13
Table 23 indicates the accuracy of the instrument and related technical requirements 14
Table 24 indicator and alarm functions relating to the technical requirements 15
Table 25 indicates the instrument and affect the amount of the relevant technical requirements 15
Table 26 loggers and accuracy-related technical requirements 16
Table 27 logger and alarm functions relating to the technical requirements 17
Table 28 Recorder and affect the amount of the relevant technical requirements 17
Table 29 Totalizer General technical requirements 18
Table 30 Ratio General technical requirements 19
Table 31 Barrier General technical requirements 21
Table 32 Q type operation General technical requirements 22
Table 33 power box General technical requirements 23
Table 34 Regulator error indicator scale technical requirements 25
Table 35 regulator "Auto - Manual" Switch error technical requirements 25
Table 36 Maximum power consumption ribbon indicator 26
Table 37 logger maximum power consumption 27
Table 38 indicates the number of error ratio test parameters 52
Table 39 Table 69 regulator factory inspection
Table 40 Table 70 with electrical appliances factory inspection
Table 41 Table 71 factory inspection indicator
Table 42 Table 71 recorder factory inspection
Table 43 Totalizer factory inspection table 72
Table 44 Table 72 ratio of factory inspection
Table 45 Table 73 barrier factory inspection
Table 46 Table 73 factory inspection operator
Table 47 Table 74 power box factory inspection
Table C. 1 basic environmental conditions 79
Table D. 1 error representation 84
Table D. 2 mechanical vibration test frequency range, amplitude and acceleration 87
Table D. 3 dielectric strength test voltage 92
Table D. 4 Rule 94 factory test project
Foreword
GB/T 2613 "industrial process measurement and control systems with electric instruments General technical conditions" is the original series DDZ-Ⅲ electric unit group
Instrument cluster calculator, regulator, distributor, indicator, recorder, totalizer, the ratio given, barriers, Q-type operation, power supply box to
And various standard operating signal merger is replaced by the following criteria.
GB/T 2613-1989 DDZ-Ⅲ series process electronic signals work;
GB/T 11005.1-1989 DDZ-Ⅲ series process electronic calculator;
GB/T 11005.2-1989 DDZ-Ⅲ series process electronic regulator;
GB/T 11005.3-1989 DDZ-Ⅲ series process electronic distributor;
GB/T 13637-1992 DDZ-Ⅲ series process electronic indicator;
GB/T 14061-1993 DDZ-Ⅲ series process electronic recorder;
GB/T 14062-1993 DDZ-Ⅲ series process electronic totalizer;
GB/T 14063-1993 DDZ-Ⅲ series process electronic control ratio of a given device;
GB/T 14065-1993 DDZ-Ⅲ series process electronic barrier;
GB/T 14068-1993 DDZ-Ⅲ series process electronic Q-type operator;
GB/T 14069-1993 DDZ-Ⅲ series process electronic power box.
For ease of use, the original standard made the following changes.
a) according to GB/T 1.1-2000 standard of 11 were replaced by integration and modification;
b) the regulator standard "re-tune time" to "integration time", "preset time" to "derivative time";
c) the original standard "radio frequency interference test" to "RFEMS test";
d) Added Appendix C (normative) Instrumentation transport, transportation, storage and basic environmental conditions and test methods;
e) Added Appendix D (normative) industrial process measurement and control systems electric and pneumatic analogue calculator Performance Evaluation
method.
This standard appendix A, Appendices C and D are normative appendix, Appendix B of this standard is the data appendix.
The standard proposed by China Machinery Industry Federation.
The standard measurement and control Standardization Technical Committee (SAC/TC124) Second Technical Committee under the jurisdiction of the national industrial processes.
This standard is drafted by. Southwest University, China Silian Instrument Group Co., Ltd.
Participated in the drafting of this standard. Machinery Industrial Instrumentation Technology and Economy Institute, Beijing Institute of Machinery Industry Automation.
The main drafters of this standard. Zhao Yixin, Huang, Zhang Jiancheng, Liu Jin.
Participate drafters of this standard. Feng Xiao L, Xie Bingbing.
This standard replaces the standards previously issued as follows.
--- GB/T 2613-1981, GB/T 2613-1989;
--- GB/T 11005.1-1989, GB/T 11005.2-1989, GB/T 11005.3-1989;
--- GB/T 13637-1992; GB/T 14061-1993; GB/T 14062-1993; GB/T 14063-1993;
GB/T 14065-1993;
--- GB/T 14068-1993; GB/T 14069-1993.
Introduction
"Industrial process measurement and control systems with electric instruments General technical conditions" major study conducted by DDZ-Ⅲ series process electronic
Calculator, regulator, distributor, indicator, recorder, totalizer, the ratio given, barriers, Q-type operator, universal power supply box technology
Operation conditions, etc., and a signal composed of working.
This standard by providing the following, and are intended to provide guidance for DDZ-Ⅲ series process electronic design, development, research.
--- DDZ-Ⅲ series process electronic models, specifications and parameters;
--- DDZ-Ⅲ series process electronic technical requirements;
--- Test methods and inspection rules DDZ-Ⅲ series process electronic instruments.
Industrial process measurement and control systems
General technical conditions for the electric meter
1 Scope
This standard specifies the DDZ-Ⅲ series process electronic calculator, regulator, distributor, indicator, recorder, totalizer,
The ratio given, barriers, Q-type operations, as well as the basic parameters of the power box, quality indicators and evaluation methods, and the provisions of the Department of DDZ-Ⅲ
Analog DC signal between the electronic control column used to transmit information.
This standard applies to DDZ-Ⅲ series process electronic calculators, including addition and subtraction, a multiplication and division is prescribing and control, hereinafter referred to as computing
Device; DTZ regulator (hereinafter referred to as regulator), DDZ-Ⅲ series process electronic control of the other regulators can also refer to use;
With electrical appliances; single needle indicator, indicator needle, ribbon indicator and alarm indication, hereinafter referred to as indicator; recorder; Totalizer; ratio to
Tuner (hereinafter referred to as the ratio of the device); isolated sensing terminal barrier and operation side safety barrier (hereinafter referred to as the detection side safety barrier detector gate operation
Side safety barrier gate operator referred to, collectively barrier), other barriers can also refer to use; Q-type operator (hereinafter referred to as the operator); Power
Box, using ferromagnetic resonance principle can refer to using the power box.
This standard specifies the current signal for transmission of information DDZ-Ⅲ series process electronic control between the control room and on-site,
Generally does not apply to information transmission control room; voltage signals specified in this standard apply to DDZ-Ⅲ series process electronic meter
Information transmission control room; This standard does not apply to information transmission unit inside the instrument; This standard does not apply to electric single series DDZ-Ⅲ
Element combination meter unit meter individual special functions, does not apply to the work of the chopper signal DDZ-Ⅲ series process electronic instruments,
For some instruments and DDZ-Ⅲ series process electronic control with the use of reference can be used.
2 Normative references
The following referenced documents in terms of this standard reference and become the standard terms. Where dated references, with its
After all of the amendments (not including errata content) or revisions do not apply to this standard, however, encourage each agreement in accordance with this standard
Are Prescriptions can use the latest versions of these documents. Anyone who does not dated reference documents, the latest versions apply to this standard.
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods - Test Db Damp (12h + 12h cycle
Ring) (GB/T 2423.4-2008, IEC 60068-2-30.2005, IDT)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 3386.1-2007 industrial process control systems with electric and pneumatic analogue chart recorders - Part 1. Performance Evaluation party
Method (IEC 60873-1.2003, IDT)
GB 3836.1 Electrical apparatus for explosive gas atmospheres - Part 1. General requirements (GB 3836.1-2000,
eqv IEC 60079-0.1998)
GB 3836.4 explosive gas environment with electrical equipment - Part 4. Intrinsic safety "i" (GB 3836.4-2000,
eqv IEC 60079-11.1999)
GB/T 15464 instrumentation packaging technology
GB/T 17212 industrial process measurement and control - Terms and definitions (GB/T 17212-1998, idt IEC 60902. 1987)
GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test (GB/T 17626.3-
2006, IEC 61000-4-3.2002, IDT)
GB/T 18271.2-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2. under reference conditions
Test (idt IEC 61298-2.1995)
|