|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26110-2010: Specification of zinc-aluminium flake coatings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26110-2010 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Specification of zinc-aluminium flake coatings
| Valid |
GB/T 26110-2010
|
PDF similar to GB/T 26110-2010
Basic data | Standard ID | GB/T 26110-2010 (GB/T26110-2010) | | Description (Translated English) | Specification of zinc-aluminium flake coatings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A29 | | Classification of International Standard | 25.220.40 | | Word Count Estimation | 7,773 | | Date of Issue | 1/10/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 1727; GB/T 5270; GB/T 6462; GB/T 6739; GB/T 10125 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies steel parts, technical requirements and test methods for zinc-aluminum coating on the component (hereinafter referred to as coating). This standard also applies to the surface protection of cast iron, aluminum and its alloys, iron-based powder metallurgy, and other materials. | GB/T 26110-2010: Specification of zinc-aluminium flake coatings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification of zinc-aluminium flake coatings
ICS 25.220.40
A29
National Standards of People's Republic of China
Zinc-aluminum coating technical conditions
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Appendix A of this standard is an informative annex.
The standard proposed by China Machinery Industry Federation.
This standard layer Standardization Technical Committee (SAC/TC57) administered by the National Metal and non-metal cover.
This standard was drafted. Beijing Yongtai and metal anti-corrosion Technology Co., Ltd., Beijing University of Chemical Technology, Ningbo, Shanghai and Ningbo Power Equipment Co. Shares
The company, Tongxiang Tak Electric Parts Co., Ltd., Hangzhou Paradise Umbrella Group Co., Ltd., Jiangsu COSCO Shipping Co. accessories.
The main drafters of this standard. Ji Jing, Zhang Hongwei, group learning process, Zhang Weiming, Yang Guoliang, Feng Xiao, Liwei Jiang, Wang Qiwei, Chen Lei, Li Xia,
Wanyou Ping.
Zinc-aluminum coating technical conditions
1 Scope
This standard specifies the steel parts, zinc and aluminum coating on the member (hereinafter referred to as coating) technical requirements and test methods. This standard is applicable to both
Surface protection for cast iron, aluminum and its alloys, iron-based powder metallurgy, and other materials.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard; however, encourage the parties to the agreement according to study
Whether to use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1727 General Film Preparation
Review of Test Methods metal cladding layer deposition and chemical deposition layer adhesion strength GB/T 5270 on the metal substrate
(GB/T 5270-2005, ISO 2819. 1980, IDT)
GB/T 6462 and the metal oxide coating layer thickness measurement microscope method (GB/T 6462-2005, ISO 1463.2003,
IDT)
GB/T 6739 Determination of paints and varnishes film hardness pencil method (GB/T 6739-2006, ISO 15184.1998, IDT)
GB/T 10125 artificial atmosphere corrosion test salt spray test (GB/T 10125-1997, eqv ISO 9227.1990)
3 Terms and Definitions
The following terms and definitions apply to this standard.
Zinc aluminum coating zinc-aluminiumflakecoatings
The aqueous chromium-free zinc-aluminum coating dipping, brushing or spraying on the surface of steel parts or components, baked to form scaly zinc as a main
Inorganic anti-corrosion coating points.
Information provided by the demand side should be for 4
a) number of this standard;
b) to be coated member desired coating level;
c) to be applied to the workpiece heat treatment process. Because the coating is baked at a temperature of about 300 ℃, the acquirer should consider the
Temperature affect the mechanical properties of the workpiece to be coated;
d) additional coating requirements, such as sealants, friction reducing agents, and color.
5 logo
5.1 Overview
Coating element symbols "Zn" (zinc) prefix "fl" (sheet), the suffix "nc" (no chrome) said. If you need to indicate in detail the technical requirements,
Such as thickness, coating requirements will be labeled on the back "flZn" of.
5.2 Example
a) the minimum time of 480h salt spray test zinc aluminum coating, labeled flZn480nc.
b) the minimum time 720h salt spray test, the minimum thickness of the zinc aluminum coating 8μm, marked flZn7208μmnc.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26110-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26110-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26110-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26110-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|