|
US$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26102-2010: Guideline for computer aided process planning
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26102-2010 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Guideline for computer aided process planning
| Valid |
GB/T 26102-2010
|
PDF similar to GB/T 26102-2010
Basic data | Standard ID | GB/T 26102-2010 (GB/T26102-2010) | | Description (Translated English) | Guideline for computer aided process planning | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J30 | | Classification of International Standard | 25.020 | | Word Count Estimation | 8,864 | | Date of Issue | 2011-01-10 | | Date of Implementation | 2011-10-01 | | Quoted Standard | GB/T 4863-2008 | | Regulation (derived from) | National Standard Approval Announcement 2011 No.1 (Total No.166) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the Computer Aided Process Planning (CAPP) objectives and data management requirements. Classification and CAPP systems, architecture, functional requirements and integration requirements. This standard applies to the development of equipment manufacturing and computer aided process planning applications software systems. | GB/T 26102-2010: Guideline for computer aided process planning---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guideline for computer aided process planning
ICS 25.020
J30
National Standards of People's Republic of China
Computer Aided Process Planning Guide
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This standard was drafted. the machine Productivity Promotion Center, Beijing generous Digital Technology Co., Ltd., Beijing Branch New Era Information Technology Co.,
the company.
The main drafters of this standard. Ding Hongyu, Huan Yongxing, Xidao Yun, Li Daisong, Liu Jing.
Computer Aided Process Planning Guide
1 Scope
This standard specifies the classification Computer Aided Process Planning (CAPP) objectives and data management requirements, and CAPP system architecture
Structure, functional and integration requirements.
This standard applies to the development of equipment manufacturing and computer-aided process planning applications software systems.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4863-2008 Machinery Manufacturing Technology Basic Terminology
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Computer Aided Process Planning computeraidedprocessplanning (CAPP)
Using computer technology to assist staff to complete the process of the review process, process design, process route formulation, process planning, process
Quota, process management and other digital technology work activities.
3.2
CAPP system CAPPsystem
Computer-aided process planning software used by the system.
3.3
Process data processdata
In the process of product design data generated in the process.
[GB/T 4863-2008 in 3.1.38]
3.4
Process Resource processresource
In the process of product design process needed resources collectively.
NOTE. Usually including in-kind resources (such as processing equipment, process equipment, materials, etc.), knowledge resources (such as expert knowledge, process parameters, the typical process, manual data, technology
Surgery norms).
3.5
Process data model processdatamodel
A method for the definition of the process data representation of a conventional method, the data is generally used to describe the process itself and its relationships.
Note. CAPP system by using the process data model, the data management process for reuse, and share changes.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26102-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26102-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26102-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26102-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|