|
US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26101-2010: General technology requirements of virtual assembly for mechanical products
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26101-2010 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
General technology requirements of virtual assembly for mechanical products
| Valid |
GB/T 26101-2010
|
PDF similar to GB/T 26101-2010
Basic data | Standard ID | GB/T 26101-2010 (GB/T26101-2010) | | Description (Translated English) | General technology requirements of virtual assembly for mechanical products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 01.100.01 | | Word Count Estimation | 7,794 | | Date of Issue | 1/10/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 24734.1; GB/T 26099.1; GB/T 26099.3 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the general requirements of mechanical products virtual assembly model, the general requirements of virtual assembly, the assembly process and requirements for planning and evaluation of the results of the virtual assembly. This Standard is applicable to assemble three-dimensional model of mechanical product assembly modeling design formation. | GB/T 26101-2010: General technology requirements of virtual assembly for mechanical products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General technology requirements of virtual assembly for mechanical products
ICS 01.100.01
J04
National Standards of People's Republic of China
Mechanical Product Virtual Assembly General technical requirements
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard by the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This standard is mainly drafted by. Mechanical Science Research Institute, China Electronics Technology Group Corporation 28th Research Institute, Beijing Digital generous
Science and Technology Co., Ltd., machine Productivity Promotion Center, Shanghai Jiaotong University, Xi'an University of Electronic Science and Technology, Guangxi Yuchai Machinery Co.,
SAIC-GM-Wuling Automobile Co., Ltd., Guangxi Liugong Machinery Co., Ltd.
The main drafters. Zhang Hongqi, single Zhongde, Chen Weidong, Xiao Chengxiang, Wang Lu, Chendi Jiang, Yan Guangrong, seized Liu Hua, He Qichang,
Liang Wu Temple, Shao Xiaodong, Li Nailiang, Yong Jun sea, Wenqiu Sheng, Zhang Yan, Han Linlin, Lidai Song, Liu Jing.
Mechanical Product Virtual Assembly General technical requirements
1 Scope
This standard specifies the general requirements for mechanical product virtual assembly model, the general requirements of virtual assembly, virtual assembly process planning and assembly
Evaluation of results and requirements.
This standard applies to assemble three-dimensional model of mechanical product assembly modeling design formation.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions (GB/T 24734.1-
2009, ISO 16792.2006, NEQ)
GB/T 26099.1 General rules for three-dimensional modeling of mechanical products - Part 1. General requirements
Part 3 GB/T 26099.3 three-dimensional modeling of mechanical products general rules. Assembly Modeling
3 Terms and Definitions
GB/T 26099.1, GB/T 26099.3 and GB/T 24734.1 and established the following terms and definitions apply to this standard.
3.1
Virtual Assembly virtualassembly
The assembly model assembly modeling of formation of a process assembly analysis and simulation. The process consists of one or more of the assembly sequence regulation
Planning, assembly path planning and assembly simulation can be used for assembly interference checking and assembly process optimization purposes.
3.2
The virtual assembly model virtualassemblymodel
Three-dimensional digital model of the desired product virtual assembly activities, which includes assembly model, model assembly environment, the virtual operator model.
3.3
Assembly Environment Model assemblyenvironmentmodel
It refers to the related environmental model virtual assembly required, usually including assembly tool model, assembly space model and assembly flow information.
3.4
Assembly flow information assemblyflowinformation
Event information for each assembly link assembly involved the entire assembly process is described, for example, the assembly of upstream and downstream information to each link assembly
Demand and so on.
3.5
Assembly tool model assemblytoolmodel
It refers to virtual assembly environment modeling tools used in the assembly process, tooling and related equipment information expression.
3.6
Assembly space model assemblyspacemodel
That describes assembly tools, virtual operators and virtual assembly model during assembly activities in the form of an envelope space model.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26101-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26101-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26101-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26101-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|