|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26090-2010: Gear circular pitch measuring instrument
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26090-2010 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Gear circular pitch measuring instrument
| Valid |
GB/T 26090-2010
|
PDF similar to GB/T 26090-2010
Basic data | Standard ID | GB/T 26090-2010 (GB/T26090-2010) | | Description (Translated English) | Gear circular pitch measuring instrument | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 9,912 | | Date of Issue | 1/10/2011 | | Date of Implementation | 10/1/2011 | | Quoted Standard | GB/T 191-2008; GB 4793.1-2007; GB/T 4879-1999; GB/T 5048-1999; GB/T 6388-1986; GB/T 9969-2008; GB/T 10095.1-2008; GB/T 14436-1993; GB/T 17163-2008 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the terms and definitions from the gear meter, type and basic parameters, requirements, safety performance, test conditions, test methods, marking and packaging. This Standard is applicable to measurable gear module in the range of 1mm ~ 20mm, the tip diameter of not more than 600mm pitch gear measuring instrument. | GB/T 26090-2010: Gear circular pitch measuring instrument---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Gear circular pitch measuring instrument
ICS 17.040.30
J42
National Standards of People's Republic of China
Gear tooth pitch measuring instrument
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard proposed by China Machinery Industry Federation.
The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized.
This standard is drafted by. Harbin Measuring & Cutting Tool Group Co., Ltd.
Participated in the drafting of this Standard. China Institute of Metrology, Beijing Branch in Sunny Ltd. since.
The main drafters of this standard. Liu Qingsheng, Sun Xiuwen, Chenxian Min, Zhao, Chen Hongan, Huo Wei.
Gear tooth pitch measuring instrument
1 Scope
This standard specifies the gear pitch gauge terms and definitions, types and basic parameters, requirements, safety performance, testing conditions, test side
France, marking and packaging.
This standard applies to gear modulus can be measured in the range of 1mm ~ 20mm, the tip diameter of not more than 600mm of gear tooth pitch measuring instrument
(Hereinafter referred to as "pitch meter").
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment Part 1. General requirements (IEC 61010-
1.2001, IDT)
GB/T 4879-1999 rust-proof packaging
GB/T 5048-1999 proof packaging
GB/T 6388-1986 transport package shipping mark
GB/T 9969-2008 General Industrial Product Manual
GB/T 10095.1-2008 Cylindrical gear accuracy system - Part 1. Definitions flanks of gear and allowable values \u200b\u200bof deviations (ISO
1328-1.1995, IDT)
GB/T 14436-1993 General industrial products assurance documents
GB/T 17163-2008 dimensional measuring instruments - Basic terminology
3 Terms and Definitions
GB/T 10095.1-2008, GB/T 17163-2008 established in the following terms and definitions apply to this standard.
3.1
Using relative or absolute measurement method, using the appropriate sensor for measuring a single pitch deviation, cumulative pitch deviations, total cumulative pitch bias
Poor gear, special measuring instrument parameters projects.
4 Types and basic parameters
Type 4.1
Pitch gauge type and the name of the main part shown in Figure 1. Illustration illustration purposes only and does not indicate a specific configuration.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26090-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26090-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26090-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26090-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|