|
US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25915.12-2021: Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25915.12-2021 | English | 264 |
Add to Cart
|
3 days [Need to translate]
|
Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration
| Valid |
GB/T 25915.12-2021
|
PDF similar to GB/T 25915.12-2021
Basic data | Standard ID | GB/T 25915.12-2021 (GB/T25915.12-2021) | | Description (Translated English) | Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | C70 | | Word Count Estimation | 14,171 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 25915.12-2021: Cleanrooms and associated controlled environments - Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cleanrooms and associated controlled environments - Part 12.Specifications for monitoring of air cleanliness by nanoscale particle concentration
ICS 13.040.35
CCSC70
National Standards of People's Republic of China
Clean room and related controlled environment Part 12.
Technical requirements for monitoring the concentration of nanoparticles in the air
(ISO 14644-12.2018, IDT)
Released on 2021-10-11
2022-05-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Monitoring 3
5 Test report 3
Appendix A (Informative) Reference Method for Monitoring with Condensation Particle Counter 5
Appendix B (informative) Particle counting efficiency and split size 8
Reference 10
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is Part 12 of GB/T 25915 "Clean Room and Related Controlled Environment". GB/T 25915 has released the following
part.
---Part 1.Classify air cleanliness according to particle concentration;
---Part 2.Monitoring of air particle concentration in clean rooms;
---Part 3.Detection method;
---Part 4.Design, construction, start-up;
---Part 5.Operation;
---Part 6.Vocabulary;
---Part 7.Isolation device (clean wind hood, glove box, isolator, microenvironment);
---Part 8.Classification of air cleanliness (ACC) grades according to chemical concentration;
---Part 9.Classification of surface cleanliness grades according to particle concentration;
---Part 10.Classification of surface cleanliness grades according to chemical concentration;
---Part 12.Technical requirements for monitoring the concentration of nanoparticles in the air.
This document is equivalent to the adoption of ISO 14644-12.2018 ``Cleanrooms and related controlled environments Part 12.Monitoring the concentration of nanoparticles in the air
Technical Requirements for Degrees."
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed and managed by the National Standardization Technical Committee for Cleanrooms and Related Controlled Environments (SAC/TC319).
Drafting organizations of this document. Zhongtian Daocheng (Suzhou) Clean Technology Co., Ltd., China Electronic Engineering Design Institute Co., Ltd., Suzhou Suxinhuan
Environment Technology Co., Ltd., Suzhou Metrology and Testing Institute, Jiangsu Sujing Engineering Construction Co., Ltd., Jiangsu Jiahe Clean Technology Co., Ltd., China Standard
Standardization Association, National Nano Science Center, China National Accreditation Center for Conformity Assessment, Nanjing Tianjia Environmental Technology Co., Ltd., Meyer (China) Environmental
Environment Technology Co., Ltd., China Power Investment Engineering Research and Evaluation Center Co., Ltd., Wujiang Huayu Purification Equipment Co., Ltd., Changzhou Xiang
Ming Intelligent Power Co., Ltd., Beijing Hengtai Construction Project Management Co., Ltd., Heshi (Suzhou) Special Materials Co., Ltd.
The main drafters of this document. Wang Yao, Jiang Weikang, Cai Jie, Sun Yucheng, Wang Qixiang, Wang Daqian, Jiang Haoya, Zhu Lan, Zhai Chuanming, Jiang Naijun,
Bing Shaotong, Shi Xiaolei, Gao Zheng, Wu Xiaoquan, Ye Weiqiang, Zhang Min, Dong Yuping, Hao Yinbo, Hui Lufeng, Xiao Yiqun.
Introduction
GB/T 25915 adopts the ISO 14644 series of international standards, and the settings of each part are consistent with the international standards. It is planned to consist of 15 parts
constitute.
---Part 1.Classify air cleanliness according to particle concentration. The purpose is to distinguish the degree of particle contamination.
---Part 2.Monitoring of air particle concentration in clean room. The purpose is to guide the monitoring of particle pollution to avoid possible pollution
risk.
---Part 3.Detection method. The purpose is to guide the detection of various pollution and related environmental elements in the clean room.
---Part 4.Design, construction, and start-up. The purpose is to guide the design, construction and start-up of the clean room.
---Part 5.Run. The purpose is to guide the operation of the clean room.
---Part 6.Vocabulary. The purpose is to unify and standardize technical terminology.
---Part 7.Isolation device (clean wind hood, glove box, isolator, microenvironment). The purpose is to propose the basis of isolation device for clean room
This requirement.
---Part 8.Classify air cleanliness (ACC) according to chemical concentration. The purpose is to distinguish the degree of air chemical pollution.
---Part 9.Classification of surface cleanliness grades according to particle concentration. The purpose is to distinguish the degree of particle contamination on the surface.
---Part 10.Classification of surface cleanliness grades according to chemical concentration. The purpose is to distinguish the degree of chemical contamination on the surface.
---Part 12.Technical requirements for monitoring the concentration of nanoparticles in the air. The purpose is to propose the detection of nano-level particle pollution
Require.
---Part 13.Surface cleaning that meets the requirements of particle and chemical cleanliness. The purpose is to put forward the cleaning requirements for the surface of the clean room to
Avoid the risk of particles and chemical contamination that may be generated.
---Part 14.Evaluate the applicability of the equipment according to the concentration of particle pollution. The purpose is to pass the related equipment that may produce particles in the clean room
Contamination test to determine the suitability of the equipment.
---Part 15.Evaluate the suitability of equipment and materials according to the concentration of chemical pollutants. The purpose is to pass the cleanliness of related equipment
Testing of chemical contamination in the room to determine the suitability of the equipment.
---Part 16.Improving the energy efficiency of clean rooms and air purification devices. The purpose is to save the energy consumption of clean room operation.
Clean rooms and related controlled environments control pollutants at appropriate levels in order to complete pollution-sensitive activities. Aerospace, Microelectronics
Products and processes in industries such as pharmaceuticals, pharmaceuticals, medical devices, food, and medical and health benefit from the control of suspended pollutants.
GB/T 25915.3-2010 is limited to the classification of particles with a particle size greater than 100nm. But in this file contains less than 100 nanometer particles
The informational content of the particle, and the particles smaller than 100nm are called ultrafine particles, not the nanoparticles as referred to in this document.
Nanotechnology is a recently formed field, generally involving materials in the size range of about 1nm to 100nm. To improve the sex of the product
Yes, its characteristic size is becoming smaller and smaller. For example, microelectronics and many health-related industries have now produced nano-scale products.
For background literature on particle size characteristics, see references [1]~[18].
Clean room and related controlled environment Part 12.
Technical requirements for monitoring the concentration of nanoparticles in the air
1 Scope
This document gives the technical requirements for monitoring the concentration of "nano-scale" particles with a particle size limit of not more than 0.1 μm (100 nm).
The monitoring technical requirements given in this document are mainly used for "dynamic".
Note 1.The “nano-scale particles” mentioned in this document refer to all particles with nanometers in one dimension (nanosheets), two dimensions (nanofibers) or three dimensions (nanoparticles).
The scale of nanomaterials.
Note 2.Please note that the actual characteristics of particles in a clean room are determined by the source of the particles and their physical characteristics.
Note 3.This document does not consider health and safety issues.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
ISO and IEC maintain a terminology database for standardization at the following website.
3.1 General
3.1.1
Cleanroom
A room in which the concentration of airborne particles is controlled and graded, and its design, construction, and operation allow particles to enter, produce, and stay in the room
controlled.
Note 1.Specifies the classification of airborne particle concentration.
Note 2.Other factors that affect the cleanliness level, such as the concentration of chemicals, microorganisms or nano-scale particles in the air, and the surface cleanliness can also be affected.
Other factors of the level, such as the concentration of particles, nanoparticles, chemicals or microorganisms, etc., are regulated and controlled.
Note 3.Related physical parameters such as temperature, humidity, pressure, vibration and static electricity can also be controlled as required.
[Source. GB/T 25915.1-2021, 3.1.1]
3.1.2
Cleanzone
The airborne particle count density is controlled and classified in a limited space. Its construction and operation enable particles that enter, produce, and stay in space
controlled.
Note 1.The level of airborne particle concentration has been determined.
Note 2.Other factors that affect the cleanliness level, such as the concentration of chemicals, microorganisms or nano-scale particles in the air, and the surface cleanliness can also be affected.
Other factors such as the concentration of particles, nanoparticles, chemicals or microorganisms, etc., are regulated and controlled.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25915.12-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 25915.12-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25915.12-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25915.12-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|