|
US$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25686-2018: Earth-moving machinery -- Safety requirements for remote operator control systems
Status: Valid GB/T 25686: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25686-2018 | English | 264 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Safety requirements for remote operator control systems
| Valid |
GB/T 25686-2018
|
| GB/T 25686-2010 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Earth-moving machinery -- Safety requirements for remote operator control
| Obsolete |
GB/T 25686-2010
|
PDF similar to GB/T 25686-2018
Basic data | Standard ID | GB/T 25686-2018 (GB/T25686-2018) | | Description (Translated English) | Earth-moving machinery -- Safety requirements for remote operator control systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 53.100 | | Word Count Estimation | 14,177 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-04-01 | | Older Standard (superseded by this standard) | GB/T 25686-2010 | | Regulation (derived from) | National Standard Announcement No. 11 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 25686-2018: Earth-moving machinery -- Safety requirements for remote operator control systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery-Safety requirements for remote operator control systems
ICS 53.100
P97
National Standards of People's Republic of China
Replace GB/T 25686-2010
Safety requirements for remote control devices for earth-moving machinery drivers
(ISO 15817.2012, IDT)
Published on.2018-09-17
Implementation of.2019-04-01
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Driver Remote Control Requirements 3
5 Direction of marking 6
6 Manual 7
Appendix A (informative) Remote Control Machine Safety Label Example 8
Reference 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 25686-2010 "Safety requirements for remote control of earth-moving machinery drivers", this standard and GB/T 25686-2010
In contrast to the editorial changes, the main technical changes are as follows.
---Modified standard name;
--- Modified the relevant content of the scope. (See Chapter 1, Chapter 1 of the.2010 edition);
--- Chapter 2 "normative references" to add and remove some of the reference standards (see Chapter 2, Chapter 2 of the.2010 edition);
--- Chapter 3 adds some terms and definitions (see Chapters 3.2, 3.3, 3.4 and 3.11);
--- Revised the title of Chapter 4 (see Chapter 4, Chapter 4 of the.2010 edition);
--- Added, modified and deleted part of the driver's remote control requirements (see Chapter 4, Chapter 4 of the.2010 edition);
--- Revised the relevant content of the forward direction mark (see Chapter 5, Chapter 5 of the.2010 edition);
---Modified part of the manual (see Chapter 6, Chapter 6 of the.2010 edition);
--- Added informative Appendix A (see Appendix A).
This standard uses the translation method equivalent to ISO 15817.2012 "Safety Requirements for Remote Control Devices for Earth-moving Machinery Drivers".
The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows.
---GB/T 4208-2017 enclosure protection grade (IP code) (IEC 60529..2013, IDT);
---GB/T 8498-2017 Basic type identification, terminology and definition of earth-moving machinery (ISO 6165.2012, IDT);
--- GB/T 8593.1-2010 Earth-moving machinery driver operating devices and other display devices with symbols - Part 1. General
No. (ISO 6405-1.2004, IDT);
--- GB/T 8593.2-2010 Earth-moving machinery driver operating devices and other display devices with symbols - Part 2.
Special symbols for devices and accessories (ISO 6405-2.1993, IDT);
---GB .20178-2014 General Rules for Safety Labels for Earth-moving Machinery (ISO 9244.2008, IDT);
---GB/T 22359-2008 Earthmoving machinery electromagnetic compatibility (ISO 13766.2006, IDT);
---GB/T 16754-2008 Mechanical safety emergency stop design principles (ISO 13850.2006, IDT).
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334).
This standard was drafted. Nan'an Zhongji Standardization Research Institute Co., Ltd., Xiamen Xiagong Machinery Co., Ltd., Xugong Group Engineering
Machinery Co., Ltd. Jiangsu Xuzhou Engineering Machinery Research Institute, Tianjin Engineering Machinery Research Institute Co., Ltd.
The main drafters of this standard. Zhu Bin, Jiang Lei, Song Tianjia, Liu Xixia.
The previous versions of the standards replaced by this standard.
---GB/T 25686-2010.
Safety requirements for remote control devices for earth-moving machinery drivers
1 Scope
This standard applies to the basic safety requirements for driver remote controls for earth moving machinery as defined in ISO 6165.
This standard does not apply to autonomous control systems that allow the machine to work on its own without the assistance of the driver, nor on non-remote controlled machines.
Remote control of the accessory device.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 6165 earthmoving machinery basic type identification, terminology and definition (Earth-movingmachinery-Basictypes-Iden-
Tificationandtermsanddefinitions)
ISO 6405-1 Ground-moving machinery - Drivers and other display devices - Part 1. General symbols (Earth-
movingmachinery-Symbolsforoperatorcontrolsandotherdisplays-Part 1.Commonsymbols)
ISO 6405-2 Earth-moving machinery - Drivers and other display devices - Part 2. Machines, work equipment and accessories
Special symbol (Earth-movingmachinery-Symbolsforoperatorcontrolsandotherdisplays-Part 2.Spe-
Cificsymbolsformachines,equipmentandaccessories)
ISO 9244 Earth-moving machinery-Machinesafetylabels-
Generalprinciples)
ISO 13766 Earth-moving machinery-electromagnetic compatibility (Earth-movingmachinery-Electromagneticcompatibility)
ISO 13850 Mechanical Safety Emergency Stop Design Principle (Safetyofmachinery-Emergencystop-Principlesfor
Design)
ISO 15998 Earthmoving Machinery Mechanical Control System (MCS) with Electronic Components Functional Safety Guidelines and Tests (Earth-
Moving machinery-Machine-controlsystems (MCS)usingelectroniccomponents-Performance
Criteriaandtestsforfunctionalsafety)
IEC 60068-2-31 Environmental Test Part 2-31. Test Test Ec. Rough treatment impact (mainly for equipment type specimens)
(Environmentaltesting-Part 2-31. Tests-TestEc. Roughhandlingshocks, primaryallyforequipment-
Typespecimens)
IEC 60529 enclosure protection rating (IP code) [Degreesofprotectionprovidedbyenclosures(IPcode)]
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Control cable controlcable
A wire that transmits signals between a remote control box and a receiving device.
3.2
Direct manipulation of directcontrol
Manipulation of the machine in contact with the driver's body.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25686-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 25686-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25686-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25686-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 25686-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25686-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|