|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25318-2019: Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
Status: Valid GB/T 25318: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25318-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
| Valid |
GB/T 25318-2019
|
| GB/T 25318-2010 | English | 719 |
Add to Cart
|
3 days [Need to translate]
|
Locking devices for ball and socket couplings of string insulator units -- Dimensions and tests
| Obsolete |
GB/T 25318-2010
|
PDF similar to GB/T 25318-2019
Basic data | Standard ID | GB/T 25318-2019 (GB/T25318-2019) | | Description (Translated English) | Locking devices for ball and socket couplings of string insulator units - Dimensions and tests | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K48 | | Classification of International Standard | 29.080.10 | | Word Count Estimation | 18,192 | | Date of Issue | 2019-12-10 | | Date of Implementation | 2020-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 25318-2019: Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Locking devices for ball and socket couplings of string insulator units--Dimensions and tests
ICS 29.080.10
K48
National Standards of People's Republic of China
Replaces GB/T 25318-2010
Lock pin for ball and socket connection of insulator string element
Dimensions and tests
(IEC 60372. 1984, MOD)
2019-12-10 release
2020-07-01 implementation
State Administration of Market Supervision
Published by the National Standardization Management Committee
Contents
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Dimensions and general rules 2
4.1 General 2
4.2 Lock pin shape 2
4.3 Dimensions of the locking pin 2
5 How to use the locking pin 4
5.1 R pin 4
5.2 W pin 5
6 Test 5
6.1 Test classification 5
6.2 Material evaluation test 5
6.3 Sampling test 7
6.4 Repeat test procedure 9
Appendix A (informative) Comparison between this standard and IEC 60372. 1984 chapter number 10
Appendix B (Normative Appendix) W-Pin Size Inspection Dosage Regulation 12
Figure 1 Dimensional diagram of standard R pin 2
Figure 2 Schematic diagram of other sizes available in R-pin manufacturing 3
Figure 3 W-pin standard dimensions 4
Figure 4 R-pin locking and coupling position 5
Figure 5 W-pin locking and coupling position
Figure 6 Schematic diagram of bending test 6
Figure 7 Dimension L inspection 8
Figure B.1 W-Pin Size Inspection Gage 12
Figure B.2 Dimensions of W pin 13
Table 1 Standard R-shaped pin size 2
Table 2 Other sizes to choose from in the manufacture of R pins 3
Table 3 W pin size 4
Table 4 Bending test radius 6
Table 5 Sample capacity and receiving constants 8
Table 6 K and D4 8
Table 7 Range of three operating load values for the locking pin operation test 9
Table A.1 Comparison between this standard and IEC 60372. 1984 chapter number 10
Table B.1 W-Pin Size Inspection and Gauge 12
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 25318-2010 "Dimensions and test of locking pins for ball and socket connection of insulator string components", and GB/T 25318-
Compared with.2010, the main technical changes are as follows.
--- Separate the "Scope" and "Normative Reference Documents" of Chapter 1 of GB/T 25318-2010 into separate chapters, and merge and change the "standard plan"
Write "Dimensions and General Rules" and "Experiment" chapters (see Chapter 1, Chapter 2, Chapter 4, Chapter 6,.2010 version 1.1, 1.2,
1.3);
--- Added normative references (see Chapter 2, 1.2 of the.2010 edition);
--- Added Chapter 3 "Terms and Definitions" and defined the terms "Lock Pin" and "Receiving Quality Limit" (see Chapter 3);
--- In Table 1, Table 2, Table 4, Table 6, supplemented the size data of connection marks 36 and 40 (see Table 1, Table 2, Table 4 and Table 6,.2010
Version of Table 1, Table 2, Table 4 and Table 6);
--- Change the connection mark 16 in Table 1, Table 2, Table 3, Table 4, Table 6 to 16B (see Table 1, Table 2, Table 3, Table 4 and Table 6,.2010
Version of Table 1, Table 2, Table 3, Table 4 and Table 6);
--- Changed the operation test judgment criterion of 3.5.5.2 of GB/T 25318-2010 to table form, added Table 7, and supplemented the connection
Mark the dimensional data of 36 and 40 (see Table 7,.2010. 3.5.5.2).
This standard uses the redrafting method to modify and adopt IEC 60372. 1984 "Dimensions and test of locking pins for ball and socket connection of insulator string elements.
Test.
Compared with IEC 60372. 1984, this standard has more structural adjustments.Appendix A lists the standard and IEC 60372. 1984.
List of chapter numbers.
There are technical differences between this standard and IEC 60372. 1984, and the terms related to these differences have passed through the margins on their outer margins
The vertical single line (|) of the
--- Added Chapter 2 "Normative Reference Documents";
--- Added Chapter 3 "Terms and Definitions", as well as "Lock Pins" and "Receiving Quality Limits" terms and definitions (see Chapter 3);
--- In 4.1, add "Note 2. For V-type non-flexible insulator string insulators, in order to avoid uneven compression of the locking pin
After deformation affects the effectiveness of locking, appropriate measures should be taken. "This is because it has been shown in actual operation of V-shaped non-flexible insulator strings.
The phenomenon of uneven compression deformation of the locking pin has been seen;
--- The sizes of the connection marks 36 and 40 have been added to Table 1, Table 2, Table 4, Table 6, and Table 7, which is mainly because this standard requires
The requirements of GB/T 4056 and GB/T 7253 revision are coordinated;
--- In order to maintain the consistency and practicality of the measurement method, the text and notes of 10.1 in IEC 60372 are included in 6.2.2 of this standard
Unify and confirm the recommended hardness measurement methods;
--- According to the actual product connection size and measurement method, change the connection mark 16 in the table to 16B;
--- Added and adjusted the relevant content of "operational test" in 6.3.6, this test has been implemented in China, has rich experience, and can be related to
GB/T 1001.1 is coordinated.
This standard also makes the following editorial changes.
--- Incorporates the contents of the first amendment of IEC 60372..1991 and the second amendment of IEC 60372..2003.
This standard was proposed by the China Electrical Equipment Industry Association.
This standard is under the jurisdiction of the National Insulator Standardization Technical Committee (SAC/TC80).
This standard was drafted. Xi'an High Voltage Apparatus Research Institute Co., Ltd., China Electric Power Research Institute Co., Ltd., Dalian Power
Porcelain Group Transmission and Transformation Material Co., Ltd., Sichuan Yibin Global Group Co., Ltd., Suzhou Electric Porcelain Factory Co., Ltd., China Southern Power Grid
Research Institute Co., Ltd., Electric Power Planning and Design Institute, Nanjing Electrical Insulator Co., Ltd., Sinoma Jiangxi Electric Porcelain Electric Co., Ltd.,
NGK Tangshan Electric Porcelain Co., Ltd., Inner Mongolia Jingcheng High-Voltage Insulator Co., Ltd., Sedwell Glass Insulator (Shanghai) Co., Ltd.
Division, Chongqing University, State Grid Zhejiang Electric Power Co., Ltd. Electric Power Research Institute, State Grid Jiangsu Power Co., Ltd. Electric Power Research Institute, State Grid
Power Science Research Institute of Sichuan Electric Power Company, State Power Grid Xinjiang Power Company Electric Power Research Institute, Shandong Zibo Electric Porcelain Factory Co., Ltd.
Division, Guangzhou Maikeling Power Equipment Co., Ltd., Changyuan High Energy Electric Co., Ltd., Jiangsu Xiangyuan Electric Equipment Co., Ltd., Xiangyang State Grid
Synthetic Insulators Co., Ltd., Pingxiang Huawei Electric Porcelain Technology Co., Ltd., Zibo Taiguang Power Equipment Factory, Zhejiang Tailun Insulators
Co., Ltd., Sanrui Technology Jiangxi Co., Ltd.
The main drafters of this standard. Zhao Hui, Deng Tao, Jing Qian, Hu Wenqi, Zhang Jijun, Wang Yunpeng, Zeng Hong, Lu Zhou, Zhang Rui, Luo Bing, Li Yongshuang,
Shi Yubing, Yang Ming, Dong Gang, Yao Junrui, Zhang Yaochen, Xiang Liang, Hu Qin, Li Te, Gao Song, Bai Huan, Liu Ling, Wang Xingfang, Ouyang Xudan, Fang Bin,
Zhang Dejin, Yang Hongjun, Hu Wenhua, Wei Xia, Ji Xiangquan, Liu Zhiping, Wei Peng.
The previous versions of the standards replaced by this standard are.
--- GB/T 25318-2010.
Lock pin for ball and socket connection of insulator string element
Dimensions and tests
1 Scope
This standard specifies the shape and standard size of the locking pin, test methods, determination criteria, and other dimensions used only as a guide for manufacturing.
This standard applies to the ball-and-socket connection of insulator string components in GB/T 4056 and the locking pins supplied separately on corresponding metal accessories.
When these lock pins are supplied with insulators or metal accessories, they should be considered as an integral part of the insulator or metal accessories
Minute. In this case, the relevant tests should be included in GB/T 1001.1. When required, a certificate of conformity shall be provided to prove the locking
Pins have been tested in accordance with the provisions of this standard. Locking pins are usually supplied with insulators or corresponding metal accessories.
This standard does not include the technical requirements of the material, but it is recommended that the surface of the material should not have an anti-corrosion layer. In addition, the material should not
Significant contact erosion (chemical reaction) occurs between the joints.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 1001.1 Insulators for overhead lines with a nominal voltage higher than 1000V. Part 1. Porcelain or glass insulators for AC systems
Component definition, test method and criterion (GB/T 1001.1-2003, IEC 60383-1..1993, MOD)
GB/T 2828.1 Sampling inspection procedures for counts. Part 1. Batch inspection inspection sampling plan retrieved by acceptance quality limit (AQL)
(GB/T 2828.1-2012, ISO 2859-1..1999, IDT)
GB/T 2900.8 Electrical term insulator (GB/T 2900.8-2009, IEC 60050-471..2007, IDT)
GB/T 4056 ball and socket connection size of insulator string components (GB/T 4056-2019, IEC 60120. 1984, MOD)
GB/T 4340.1 Vickers hardness test for metallic materials. Part 1. Test method (GB/T 4340.1-2009, ISO 6507-
1..2005, MOD)
GB/T 4340.4-2009 Vickers hardness test for metallic materials. Part 4. Table of hardness values (ISO 6507-4..2005, IDT)
3 terms and definitions
The following terms and definitions defined in GB/T 2900.8, GB/T 1001.1, GB/T 4056 and GB/T 2828.1 apply to this
file.
3.1
Locking pin lockingdevice
Uses the elasticity and/or shape characteristics of its own material to connect insulators and metal accessories together for insulator balls
The socket connection prevents the foot ball from coming out of the hat socket.
3.2
Acceptance quality limit; AQL
When a continuous series of batches is submitted for acceptance sampling, the worst process average quality level allowed. Percent of nonconforming product or per
The number of unqualified products per hundred units is indicated.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25318-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 25318-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25318-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25318-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 25318-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25318-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|