|
US$354.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25137-2010: Titanium and titanium alloy forgings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25137-2010 | English | 354 |
Add to Cart
|
3 days [Need to translate]
|
Titanium and titanium alloy forgings
| Valid |
GB/T 25137-2010
|
PDF similar to GB/T 25137-2010
Basic data | Standard ID | GB/T 25137-2010 (GB/T25137-2010) | | Description (Translated English) | Titanium and titanium alloy forgings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J32 | | Classification of International Standard | 25.020 | | Word Count Estimation | 18,159 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-02-01 | | Quoted Standard | ASTM B348; ASTM E8; ASTM E29; ASTM E120; ASTM E1409; ASTM E1447 | | Adopted Standard | ASTM B381-2006a, IDT | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard applies to the following 39 kinds of grades of titanium and titanium alloy forgings annealed state. | GB/T 25137-2010: Titanium and titanium alloy forgings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Titanium and titanium alloy forgings
ICS 25.020
J32
National Standards of People's Republic of China
Titanium and titanium alloy forgings
Issued on. 2010-09-26
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 2
3 Terms and definitions 2
4 Buy 2
Raw materials and production 4 5
6 chemical composition 5
7 Mechanical properties 10
8 NDT 10
Size 9 and 10 permit deviations
10 10 Surface Quality
Repeat the test 11 10
12 Data rounding provisions 10
13 rejected 10
14 arbitration testing and analysis 10
15 quality certificates 10
16 packaging and identification 11
Additional requirements in Appendix A (Informative Appendix) F-3 titanium alloy forgings 12
Annex B (informative) titanium alloys table 14
Foreword
This standard is equivalent to using ASTMB381-2006a "titanium and titanium alloy forgings standards" (in English).
This standard is equivalent translation ASTMB381-2006a, for ease of use, the editorial changes made the following standard.
--- The standard name to "titanium and titanium alloy forgings";
The term --- the "standard" to "this standard";
--- 1.2 is amended as follows. "In the International System of Units unit of value as a standard value in parentheses English units value";
Chapter 17 --- delete keywords;
--- Added Appendix B grade titanium table.
The Standard Appendix A, Appendix B are informative appendices.
This standard by the National Standardization Technical Committee Forging (SAC/TC74) and focal points.
This standard was drafted. Beijing Air Materiel Biam high-tech Co., Ltd ..
The main drafters of this standard. Weizhu Min, Li Yuanchun, Fangui Bin, Hai Yan, Huang Tiane.
Titanium and titanium alloy forgings
1 Scope
1.1 standard applies to the following 39 kinds of titanium and titanium alloy forgings grade annealed state.
1) F-1 titanium;
2) F-2 pure titanium;
3) F-2H titanium [minimum tensile strength of 400MPa (58ksi) of the F-2];
4) F-3 titanium;
5) F-4 titanium;
6) F-5 titanium alloy (6% Al, 4% V);
7) F-6 Titanium (5% Al, 2.5% Sn);
8) F-7 Titanium 0.12% ~ 0.25% Pd;
9) F-7H titanium 0.12% ~ 0.25% Pd [minimum tensile strength of 400MPa (58ksi) of F-7];
10) F-9 titanium alloy (3% Al, 2.5% V);
11) F-11 Titanium 0.12% ~ 0.25% Pd;
12) F-12 titanium alloy (0.3% Mo, 0.8% Ni);
13) F-13 titanium alloy (0.5% Ni, 0.05% Ru);
14) F-14 titanium alloy (0.5% Ni, 0.05% Ru);
15) F-15 titanium alloy (0.5% Ni, 0.05% Ru);
16) F-16 Titanium 0.04% ~ 0.08% Pd;
17) F-16H titanium 0.04% ~ 0.08% Pd [minimum tensile strength of 400MPa (58ksi) of the F-16];
18) F-17 Titanium 0.04% ~ 0.08% Pd;
19) F-18 titanium alloy (3% Al, 2.5% V) 0.04% ~ 0.08% Pd;
20) F-19 titanium alloy (3% Al, 8% V, 6% Cr, 4% Zr, 4% Mo);
21) F-20 titanium alloy (3% Al, 8% V, 6% Cr, 4% Zr, 4% Mo) 0.04% ~ 0.08% Pd;
22) F-21 titanium alloy (3% Al, 2.7% Nb, 15% Mo, 0.25% Si);
23) F-23 titanium alloy (6% Al, 4% V, the ELI ultra low interstitial elements);
24) F-24 titanium alloy (6% Al, 4% V) 0.04% ~ 0.08% Pd;
25) F-25 titanium alloy (6% Al, 4% V) 0.3% ~ 0.8% Ni 0.04% ~ 0.08% Pd;
26) F-26 titanium 0.08% ~ 0.14% Ru;
27) F-26H titanium 0.08% ~ 0.14% Ru [minimum tensile strength of 400MPa (58ksi) of the F-26];
28) F-27 titanium 0.08% ~ 0.14% Ru;
29) F-28 titanium alloy (3% Al, 2.5% V 0.08% ~ 0.14% Ru);
30) F-29 titanium alloy (6% Al, 4% V, ultra-low interstitial elements ELI 0.08% ~ 0.14% Ru);
31) F-30 titanium alloy (0.3% Co, 0.05% Pd);
32) F-31 titanium alloy (0.3% Co, 0.05% Pd);
33) F-32 titanium alloy (5% Al, 1% V, 1% Sn, 1% Zr, 0.8% Mo);
34) F-33 titanium alloy (0.4% Ni, 0.015% Pd, 0.025% Ru, 0.15% Cr);
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25137-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25137-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25137-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25137-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|