|
US$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24425.6-2009: Specification for wire thread inserts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24425.6-2009 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Specification for wire thread inserts
| Valid |
GB/T 24425.6-2009
|
PDF similar to GB/T 24425.6-2009
Basic data | Standard ID | GB/T 24425.6-2009 (GB/T24425.6-2009) | | Description (Translated English) | Specification for wire thread inserts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J13 | | Classification of International Standard | 21.060.10 | | Word Count Estimation | 14,182 | | Date of Issue | 2009-10-15 | | Date of Implementation | 2010-03-01 | | Quoted Standard | GB/T 90.1; GB/T 90.2; GB/T 196; GB/T 197; GB/T 24425.1; GB/T 24425.2; GB/T 24425.3; GB/T 24425.4; GB/T 24425.5 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.11 (Total No.151) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the wire nut symmetrical faces technical requirements, acceptance inspection and marking and packaging. This section applies to GB/T 24425. 1 ~ GB wire thread insert product/T 24425. 5 regulations. | GB/T 24425.6-2009: Specification for wire thread inserts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for wire thread inserts
ICS 21.060.10
J13
National Standards of People's Republic of China
Wire thread insert Technical conditions
Posted 2009-10-15
2010-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This part is the "wire thread insert" one of series of standards to national standards, the series includes.
a) GB/T 24425.1-2009 common type wire thread insert;
b) GB/T 24425.2-2009 common type blind hole with a wire nut;
c) GB/T 24425.3-2009 locking type wire thread insert;
d) GB/T 24425.4-2009 locking type blind hole with a wire nut;
e) GB/T 24425.5-2009 wire thread within the thread;
f) GB/T 24425.6-2009 wire thread insert technical conditions.
This part of GB/T 24425 Part 6.
This part of the Annex A, Annex B and Annex C is informative appendix.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized.
This section is responsible for drafting units. the machine Productivity Promotion Center, Shenyang Liming mechanical components factory.
Participated in the drafting of this section. Shanghai Co., Ltd. Ball prescribed standards.
This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners.
Wire thread insert Technical conditions
1 Scope
This section GB/T 24425 specifies the steel surface symmetrical collar technical requirements, acceptance inspection and marking and packaging.
This section applies to GB/T 24425.1 ~ GB wire thread insert product/T 24425.5 requirements.
2 Normative references
The following documents contain provisions which, through reference GB/T 24425 in this section constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 90.1 fasteners acceptance inspection (GB/T 90.1-2002, idtISO 3269.2000)
GB/T 90.2 Fasteners marking and packaging
GB/T 196 common thread basic size (GB/T 196-2003, ISO 724.1993, ISO generalpurposemetric
screwthreads-Basicdimensions, MOD)
GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1.1998, ISO generalpurposemetric
screwthreads-Tolerances-Part 1. Principlesbasicdata, MOD)
GB/T 24425.1 common type wire thread insert
GB/T 24425.2 common type blind hole with a wire nut
GB/T 24425.3 locking type wire thread insert
GB/T 24425.4 locking type blind hole with a wire nut
GB/T 24425.5 wire thread internal thread
3 wire thread surface dwelling
3.1 wire thread dwelling surface is rhombic cross-section taken through its axis.
Type size 3.2 wire thread dwelling surface in Figure 1 and Table 1 of the regulations.
P --- pitch.
Figure 1 Type Size
|