|
US$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24425.3-2009: Prevailing torque type wire thread inserts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24425.3-2009 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Prevailing torque type wire thread inserts
| Valid |
GB/T 24425.3-2009
|
PDF similar to GB/T 24425.3-2009
Basic data | Standard ID | GB/T 24425.3-2009 (GB/T24425.3-2009) | | Description (Translated English) | Prevailing torque type wire thread inserts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J13 | | Classification of International Standard | 21.060.10 | | Word Count Estimation | 14,117 | | Date of Issue | 2009-10-15 | | Date of Implementation | 2010-03-01 | | Quoted Standard | GB/T 197; GB/T 1237; GB/T 24425.5; GB/T 24425.6 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.11 (Total No.151) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the nominal diameter of 3mm ~ 39 mm, pitch of symmetrical face lock type wire thread insert 0. 5mm ~ 4mm 's. Tolerances specified in this part of the wire thread insert, screw GB/T 24425. 5 provisions 5H for internal threads, the thread is formed with 5H (GB/T 197). Provisions of this section apply to wire thread insert body to improve low- strength material (eg: aluminum, magnesium alloys, copper alloys, cast iron and non-metallic) strength holes to improve the fatigue strength of the screw, locking improve performance, repair damaged screw. | GB/T 24425.3-2009: Prevailing torque type wire thread inserts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Prevailing torque type wire thread inserts
ICS 21.060.10
J13
National Standards of People's Republic of China
Locking type wire thread insert
Posted 2009-10-15
2010-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This part is the "wire thread insert" one of series of standards to national standards, the series includes.
a) GB/T 24425.1-2009 common type wire thread insert;
b) GB/T 24425.2-2009 common type blind hole with a wire nut;
c) GB/T 24425.3-2009 locking type wire thread insert;
d) GB/T 24425.4-2009 locking type blind hole with a wire nut;
e) GB/T 24425.5-2009 wire thread within the thread;
f) GB/T 24425.6-2009 wire thread insert technical conditions.
This part of GB/T 24425 Part 3.
Appendix A of this section is informative appendix.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized.
This section is responsible for drafting units. the machine Productivity Promotion Center, Shenyang Liming mechanical components factory.
Participated in the drafting of this section. Shanghai Co., Ltd. Ball prescribed standards.
This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners.
Locking type wire thread insert
1 Scope
This section GB/T 24425 specifies the nominal thread diameter of 3mm ~ 39mm, pitch 0.5mm ~ 4mm symmetrical face of
Locking type wire thread insert.
This section provides the wire thread insert, screw GB/T 24425.5 specified tolerances for internal threads 5H, the internal thread is formed as a band
5H (GB/T 197).
This Part shall apply to the wire thread insert material to improve the low intensity of the body (such as. aluminum, magnesium alloy, copper alloy, cast iron and non-metallic) spiro
The strength of the hole to improve the fatigue strength of the screw, locking improve performance, repair damaged holes.
Note. This section uses the "nominal thread diameter" and "wire Lo sets of specifications" refers to the wire thread insert is screwed into GB/T 24425.5 after a predetermined internal thread, which is formed in
Male screw thread of nominal diameter and thread size.
2 Normative references
The following documents contain provisions which, through reference GB/T 24425 in this section constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1.1998, ISO generalpurposemetric
screwthreads-Tolerances-Part 1. Principlesbasicdata, MOD)
GB/T 1237 fasteners labeling method (GB/T 1237-2000, eqvISO 8991. 1986)
GB/T 24425.5 wire thread internal thread
GB/T 24425.6 wire thread insert Technical conditions
3 Dimensions
3.1 wire thread insert type size in a free state in Figure 1, as specified in Table 1 and Table 2.
Figure 1 Type Size
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24425.3-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24425.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 24425.3-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24425.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|