HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 2424.17-2008 English PDF

US$354.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2424.17-2008: Environmental testing -- Part 2: Tests methods guidance on -- Test T: Soldering Test
Status: Valid

GB/T 2424.17: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 2424.17-2008English354 Add to Cart 3 days [Need to translate] Environmental testing -- Part 2: Tests methods guidance on -- Test T: Soldering Test Valid GB/T 2424.17-2008
GB/T 2424.17-1995English439 Add to Cart 4 days [Need to translate] Environmental testing for electric and electronic prodcts. Guidance on soldering test Obsolete GB/T 2424.17-1995
GB 2424.17-1982English199 Add to Cart 2 days [Need to translate] Basic environmental testing procedures for electric and electronic products--Guidance on soldering test Obsolete GB 2424.17-1982

PDF similar to GB/T 2424.17-2008


Standard similar to GB/T 2424.17-2008

GB/T 2423.65   GB/T 2424.5   GB/T 2423.7   GB/T 2424.25   GB/T 2424.12   GB/T 2424.11   

Basic data

Standard ID GB/T 2424.17-2008 (GB/T2424.17-2008)
Description (Translated English) Environmental testing -- Part 2: Tests methods guidance on -- Test T: Soldering Test
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 19.040
Word Count Estimation 18,118
Date of Issue 2008-12-30
Date of Implementation 2009-11-01
Older Standard (superseded by this standard) GB/T 2424.17-1995
Adopted Standard IEC 60068-2-44-1995, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 25 of 2008 (total 138)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the writers background information and suggestions.

GB/T 2424.17-2008: Environmental testing -- Part 2: Tests methods guidance on -- Test T: Soldering Test


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Environmental testing Part 2. Tests methods guidance on Test T. Soldering Test ICS 19.040 K04 National Standards of People's Republic of China GB/T 2424.17-2008/IEC 60068-2-44.1995 Replacing GB/T 2424.17-1995 Environmental testing for electric and electronic products Part 2. Test methods Test T. Soldering Test Guidelines (IEC 60068-2-44.1995, Environmentaltesting- Part 2. Tests-GuidanceontestT. Soldering, IDT) Posted 2009-11-01 2008-12-30 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ The first chapter General 1 1 Scope 1 2 Normative references 1 The second General 1 The basic conditions of a solder 3 Weldability and wettability terminations 24 elements 5 solderability test arrangements in Environmental Testing 2 6 solderability test 3 7 wettability test 4 8 test conditions described 6 9 requirements and the results of the statistical properties of 8 Third wetting balance method solderability test guidelines 9 10 General 9 Characteristics of the test equipment 11 10 12 A typical value of the force - time curve example 11 13 force values \u200b\u200b- time curve of test parameters 11 GB/T 2424.17-2008/IEC 60068-2-44.1995

Foreword

GB/T 2424 "Environmental testing for electric and electronic products" divided into the following sections. --- Part 1. high temperature and low temperature tests; --- Part 2. damp heat tests; --- Part 5. confirm the performance of temperature chambers; --- Part 6. temperature/humidity chamber performance confirmation; --- Part 7. Test A and B (with load) measurements in temperature chambers; --- Part 10. atmospheric corrosion accelerated testing of common guidelines; --- Part 13. Temperature change Test Guidelines; --- Part 14. Solar radiation testing; --- Part 15. temperature/low air pressure tests guidelines; --- Part 17. Soldering Test Guidelines; --- Part 19. Simulation of the effects of storage Environmental Test Guidelines; --- Part 22. temperature (cold and heat) and vibration (sinusoidal) Test Guidelines; --- Part 25. Tests Guidance Seismic test methods; --- Part 26. Supporting documentation and guidance vibration test selection. This section GB/T 2424 Part 17. This section identical with IEC 60068-2-44.1995 "Environmental testing - Part 2. Tests - Test T. Soldering Test Guidelines." In order to facilitate understanding of the use of this section only made the following editorial changes. --- The normative reference document IEC 60068-2-20 and IEC 60068-2-54 into national standards equivalent have been used; --- The term "this part of IEC 60068" with the words "GB/T 2423 this part" or "this part"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete international standards foreword. This Part replaces GB/T 2424.17-1995 "Environmental testing for electric and electronic products soldering test guidelines." This section compared with the GB/T 2424.17-1995, main technical differences are. --- Complements the wetting balance method solderability test guidelines. This part of the National Electrical and Electronic Products Environmental conditions and environmental tests for Standardization Technical Committee (SAC/TC8) and focal points. This in part by the Ministry of Information Industry Institute of Electronics fifth drafted, Shanghai Institute of Quality Supervision, Inspection and Guangzhou University to participate Drafting. The main drafters of this section. Qiubao Jun, Zou Ya ice, Lu Zhaoming, Xu Zhong roots. GB/T 2424.17-2008/IEC 60068-2-44.1995 Environmental testing for electric and electronic products Part 2. Test methods Test T. Soldering Test Guidelines The first chapter General

1 Scope

GB/T 2424 this part of the reference GB/T 2423.28-2005, GB/T 2423.32-2008 and IEC 60068-2-58. 1989, Provide background information and recommendations for the specification writers.

2 Normative references

The following documents contain provisions which, through reference to GB/T 2424 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2423.28-2005 Environmental testing for electric and electronic products Part 2. Test methods - Test T. Soldering (IEC 60068- 2-20. 1979, IDT) GB/T 2423.32-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ta. wetting balance method solderability Sex (IEC 60068-2-54.2006, IDT) IEC 60068-2-58. 1989 Environmental testing - Part 2. Test methods - Test Td. surface mount components weldability, metal Layer refractory corrosion and resistance to soldering heat IEC 60249 PCB base material (all parts) IEC 60326-2.1990 boards - Part 2. Test methods The second General

3 soldered basic conditions

Soldered joints of the ease and reliability depends on the following three conditions. a) Welding Design. depends for welding two metal parts (such as shape, size, composition, etc.) and assembly methods (e.g., relative positions, Fixed the initial selection, etc.); b) the wettability of the weld metal surface of the part; c) welding conditions used, including. temperature, time, flux, solder alloy, and other equipment. Conditions a) and c) relates to the choice of the manufacturer of the device or component, they should understand the importance of each condition and their extreme variations Limit, condition b) depends, in most cases component manufacturers, equipment manufacturers also affect improperly handled or stored. Equipment manufacturers who must Subject to conditions a) and c) of the surface wettability make provisions regardless of the degree of precision. On the other hand, it has a satisfactory surface quality The elements may not be able to prevent the rejection of the solder joints due to defects in welding design and welding conditions caused. Responsibility between the member manufacturers and equipment manufacturers often overlap each other, so it is necessary for the member terminals may run Moist or more generally elements weldability make a clearly defined. GB/T 2424.17-2008/IEC 60068-2-44.1995

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2424.17-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2424.17-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2424.17-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2424.17-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2424.17-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2424.17-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.