|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22823-2025: Adhesive tape base paper
Status: Valid GB/T 22823: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22823-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Adhesive tape base paper
| Valid |
GB/T 22823-2025
|
| GB/T 22823-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Adhesive tape base paper
| Valid |
GB/T 22823-2008
|
Basic data | Standard ID | GB/T 22823-2025 (GB/T22823-2025) | | Description (Translated English) | Adhesive tape base paper | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y32 | | Classification of International Standard | 85.060 | | Word Count Estimation | 14,135 | | Date of Issue | 2025-08-29 | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 22823-2008 | | Issuing agency(ies) | State Administration for Market Regulation; Standardization Administration of China | GB/T 22823-2025: Adhesive tape base paper---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT22823-2025
ICS 85.060
CCSY32
National Standards of the People's Republic of China
Replaces GB/T 22823-2008
Tape base paper
Published on 2025-08-29
Implemented on 2026-03-01
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document replaces GB/T 22823-2008 "Base Paper for Adhesive Tape". Compared with GB/T 22823-2008, the main differences are structural adjustments and editorial changes.
Aside from the changes, the main technical changes are as follows.
a) The scope has been changed (see Chapter 1, Chapter 1 of the.2008 edition);
b) The classification has been changed (see Chapter 4, Chapter 3 of the.2008 edition);
c) The requirements for basis weight deviation, tightness, tensile strength, and longitudinal wet tensile strength of the base paper for double-sided adhesive tape have been revised (see 5.1.1,.2008 edition).
4.1);
d) Requirements and test methods for the absorbency of the base paper of double-sided adhesive tape have been added (see 5.1.1 and 6.6);
e) Increased requirements for the internal quality of the base paper for single-sided adhesive tape (see 5.1.2);
f) The requirements for appearance and number of connectors have been changed (see 5.2, 5.3, and 4.3 and 4.4 in the.2008 edition);
g) Additional test methods were added for smoothness, color difference ΔE within the same batch of paper, resistance to liquid penetration, and water fastness (see 6.7, 6.9, 6.10 and 6.10).
6.11);
h) The inspection rules have been changed (see Chapter 7, Chapter 6 of the.2008 edition).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China National Light Industry Council.
This document is under the jurisdiction of the National Technical Committee on Standardization of Paper Industry (SAC/TC141).
This document was drafted by. Zhejiang Kaineng New Materials Co., Ltd., Zhejiang Shunpu New Materials Technology Co., Ltd., and Jiangsu Dinghang Materials Technology Co., Ltd.
Limited Liability Company, Zhejiang Kaifeng New Material Co., Ltd., Zhejiang Ruilin Technology Co., Ltd., China Pulp and Paper Research Institute Co., Ltd., China Light Paper
Product Inspection and Certification Co., Ltd.
The main drafters of this document are. Zhou Zhenyu, Liu Chengyue, Chen Junhua, Yuan Taojing, Wang Dong, An Tiantian, Zeng Ruitao, Lin Xiaoyi, Zhu Xianqi, and Zhu Yong.
Zeng Fulin, Zhang Qi, Liu Yang, Wen Jianyu, Wang Xinting, Feng Yafang.
The release history of this document and the document it replaces is as follows.
---First published in.2008 as GB/T 22823-2008;
---This is the first revision.
Tape base paper
1.Scope
This document specifies the requirements for adhesive tape base paper, inspection rules, marking, packaging, transportation, and storage, describes the corresponding test methods, and provides...
Information regarding classification.
This document applies to the production, inspection, and sale of adhesive tape base paper.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 450 Paper and paperboard specimen collection and determination of longitudinal and transverse directions, front and back sides of specimens
GB/T 451.1 Determination of dimensions and skewness of paper and paperboard
GB/T 451.2 Paper and paperboard - Part 2.Determination of basis weight
GB/T 451.3 Determination of thickness of paper and paperboard
GB/T 456 Determination of smoothness of paper and paperboard (Beck method)
GB/T 461.3 Determination of water absorbency of paper and paperboard (immersion method)
GB/T 462 Determination of moisture content in analytical samples of paper, paperboard and pulp
GB/T 465.2 Determination of tensile strength of paper and paperboard after immersion in water
GB/T 1914 Chemical Analysis Filter Paper
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1.Sampling Schemes Retrieved by Acceptable Quality Limit (AQL) for Lot-by-Lot Inspection
GB/T 7974 Determination of blue light diffuse reflectance factor D65 luminance of paper, paperboard and pulp (diffuse/vertical method, outdoor daylight conditions)
GB/T 7975 Determination of color of paper and paperboard (diffuse reflectance method)
GB/T 10342 Packaging and Marking of Paper
GB/T 10739 Standard atmospheric conditions for the treatment and testing of paper, paperboard and pulp specimens
GB/T 12914 Determination of tensile strength of paper and paperboard - Constant rate tensile test (20 mm/min)
3.Terms and Definitions
This document does not contain any terms or definitions that need to be defined.
4.Classification
4.1 Adhesive tape base paper is classified into double-sided tape base paper and single-sided tape base paper according to its use. Double-sided tape base paper is used to make double-sided tape, while single-sided tape...
The base paper is used to make single-sided tape (wash paper tape).
4.2 Single-sided tape base paper is divided into white single-sided tape base paper and colored single-sided tape base paper according to color.
5 Technical Requirements
5.1 Intrinsic Quality
5.1.1 The internal quality of the base paper for double-sided adhesive tape shall meet the requirements specified in Table 1.
Table 1 Internal Quality Requirements for Double-Sided Adhesive Tape Base Paper
Indicator naming requirements
Quantitative data and quantitative deviation (g/m2)
11.0
±0.6
12.0
±0.6
14.0
±0.7
16.0
±0.8
18.0
±0.9
20.0
±1.0
22.0
±1.1
25.0
±1.2
Tightness (g/cm3) ≤0.53 ≤0.58 ≤0.62 ≤0.65
Tensile strength (kN/m)
Longitudinal ≥0.56 ≥0.66 ≥0.82 ≥1.05 ≥1.25 ≥1.35 ≥1.65 ≥1.80
Horizontal ≥0.10 ≥0.11 ≥0.13 ≥0.16 ≥0.20 ≥0.24 ≥0.28 ≥0.30
Longitudinal wet tensile strength (kN/m) ≥0.10 ≥0.12 ≥0.16 ≥0.19 ≥0.23 ≥0.27 ≥0.30 ≥0.35
Water absorption (g/m2). 20.0~40.0 30.0~60.0
D65 brightness/% ≥75.0
Moisture content at delivery ≤8.0%
5.1.2 The internal quality of the base paper for single-sided adhesive tape shall meet the requirements specified in Table 2.
Table 2 Internal Quality Requirements for Single-Sided Adhesive Tape Base Paper
Indicator naming requirements
Quantitative value (g/m2). 35.0~65.0
Quantitative deviation/% ±5.0
Tightness (g/cm3) 0.56~0.80
Tensile strength (kN/m)
Vertical
Horizontal
≥1.80
≥0.70
Elongation /%
Vertical
Horizontal
≥2.5
≥5.0
Longitudinal wet tensile strength (kN/m) ≥0.60
Smoothness (front side)/s ≥15
D65 luminance (a/%) ≥75.0
Color difference ΔEb of paper in the same batch ≤4.0
Liquid permeability/s ≥90
Water fastness (b) ≤2.0
Moisture content at delivery ≤8.0%
a. Only white paper will be used for assessment.
b. Only colored paper will be used for assessment.
5.2 Appearance
5.2.1 The base paper for the tape is in roll form. The roll end face should be neat, free from wavy lines and other mechanical damage. The tension at both ends should be consistent. The paper end face should...
There should be no tears, no sandwiched edges, and the paper core should be free from looseness and deformation.
5.2.2 The paper should be flat, clean, wrinkle-free, and free of holes; the fiber structure should be uniform, free of sand, impurities, pulp lumps, and other paper defects that may affect its use.
5.3 Number of connectors
Each roll of paper should have no more than two joints, and the joints should be firmly glued and clearly marked.
5.4 Dimensions and Dimensional Deviations
The width of the tape base paper roll shall conform to the order contract, and the width deviation shall not exceed ±3mm; the roll diameter shall be 500mm~1000mm, or
According to the purchase order contract.
6.Test Methods
6.1 Sample collection and processing
Sample collection shall be carried out in accordance with GB/T 450.For quantitative analysis and quantitative deviation, density, tensile strength, elongation, and longitudinal wet tensile strength, etc.
The determination of water absorption, smoothness and dimensional deviation, sample treatment and standard atmosphere for testing shall be carried out in accordance with GB/T 10739.
6.2 Quantitative Analysis and Quantitative Bias
Quantitative determination and quantitative deviation shall be performed in accordance with GB/T 451.2.
6.3 Tightness
The determination shall be carried out in accordance with GB/T 451.3.The thickness of the laminated sample shall be measured, and the compactness shall be calculated based on the thickness of a single layer.
6.4 Tensile strength and elongation
The determination shall be carried out in accordance with GB/T 12914.
6.5 Longitudinal wet tensile strength
The test shall be conducted in accordance with GB/T 465.2, and the immersion time of the sample in water shall be 10 min.
6.6 Water Absorbency
The water absorption time was determined according to GB/T 461.3 and was 60 seconds.
6.7 Smoothness
The determination shall be carried out in accordance with GB/T 456.
6.8 D65 brightness
The determination shall be carried out in accordance with GB/T 7974.
6.9 Color difference ΔE of paper in the same batch
The determination shall be carried out in accordance with GB/T 7975.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22823-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 22823-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22823-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22823-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 22823-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22823-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|