|
US$394.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22198-2008: Acceptance tests for steam turbine speed control systems
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22198-2008 | English | 394 |
Add to Cart
|
3 days [Need to translate]
|
Acceptance tests for steam turbine speed control systems
| Valid |
GB/T 22198-2008
|
PDF similar to GB/T 22198-2008
Basic data | Standard ID | GB/T 22198-2008 (GB/T22198-2008) | | Description (Translated English) | Acceptance tests for steam turbine speed control systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K54 | | Classification of International Standard | 27.040 | | Word Count Estimation | 20,226 | | Date of Issue | 2008-07-16 | | Date of Implementation | 2009-04-01 | | Quoted Standard | GB/T 5578-2007 | | Adopted Standard | IEC 61064-1991, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the power stations driven alternator fixed speed turbine speed control system acceptance test. Speed ??control system includes a speed control system and overspeed protection systems. For other types of turbines, any suitable also be used. | GB/T 22198-2008: Acceptance tests for steam turbine speed control systems---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Acceptance tests for steam turbine speed control systems
ICS 27.040
K54
National Standards of People's Republic of China
GB/T 22198-2008/IEC 61064.1991
Turbine speed control system acceptance test
(IEC 61064.1991, IDT)
Posted 2008-07-16
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with IEC 61064.1991 "turbine speed control system acceptance test" (in English).
This standard is equivalent translation IEC 61064.1991.
For ease of use, this standard made the following editorial changes.
a) Remove IEC 61063.1991 original "preface" and so on;
b) to IEC 61064.1991 in the original part of the body (such as. terminology, etc.), according to China described the proper habits
When compiled and unity;
c) to IEC 61064.1991 Part of the original chart will be recompiled.
Appendix A of this standard is a normative appendix.
The standard proposed by China Electrical Equipment Industrial Association.
This standard by the National Standardization Technical Committee turbine (SAC/TC172) centralized.
This standard was drafted. Shanghai Power Equipment Research Institute, Xi'an Thermal Power Research Institute Co., Ltd.
The main drafters of this standard. Cheng Pei Jun, Yang Shoumin, Feng Shi Lian, Liu Chen, Ye Fen.
GB/T 22198-2008/IEC 61064.1991
Turbine speed control system acceptance test
1 Scope and purpose
This standard applies acceptance test driven alternator speed in a given power plant turbine speed control system. Speed \u200b\u200bcontrol system
System includes speed control system and overspeed protection system. For other types of turbines, all suitable may be used.
Turbine speed control system and overspeed protection system acceptance test purpose is to verify the manufacturer to ensure that the indicators proposed in the book. through
Often, this test is to verify these indicators and GB/T 5578 standard compliance. These indicators may include.
a) speed droop;
b) local speed droop;
c) When an empty load, corresponding to the lower limit of the speed range synchronizer;
d) slow rate of speed control system;
e) stability of the speed control system;
F) After the rejection to the part load and full load in the speed control system, the maximum instantaneous speed increases value;
g) overspeed shutoff setting value;
h) speed control system malfunction thrown under maximum instantaneous speed value to full load after.
Other test procedures and selection of pilot projects not included in this standard, agreed upon by both parties.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5578-2007 stationary power generation steam turbine specification (IEC 60045-1.1991, MOD)
3 terminology, symbols, definitions and units
The standard recommended in Table 1, the symbols given in Table 2 and Figure 1, definitions and units. Table 1 lists the basic terminology, symbols and units,
Table 2 shows the terminology, symbols, definitions and units of this standard specific parameters. Definitions GB/T 5578-2007 are also suitable.
Table 1
Symbol Unit No. term
Power or load powerorload
Pressure pressure
Temperature temperature
Angular velocity angularspeed
Speed \u200b\u200brotationalspeed
Voltage voltage
Current current
Oil Motive position or stroke positionorstrokeofservomotors
Valve position or stroke positionorstrokeofvalves
Wrong throttle position or stroke positionorstrokeofpilots
Characteristic time constant of the time, members of the timeconstant, characteristictimeofel-
ement
MW or kW
MPa or bar
K or ℃
rad/s
Hz, r/s (r/min)
mm, rad or (°)
mm, rad or (°)
mm, rad or (°)
GB/T 22198-2008/IEC 61064.1991
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22198-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22198-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22198-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22198-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|