HOME   Cart(9)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 21957-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21957-2008: The fatigue-life testing method of the axle shaft and drive shaft on the test stand，wheeled agricultural tractor
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 21957-2008English189 Add to Cart 3 days [Need to translate] The fatigue-life testing method of the axle shaft and drive shaft on the test stand，wheeled agricultural tractor Valid GB/T 21957-2008

PDF similar to GB/T 21957-2008


Standard similar to GB/T 21957-2008

GB/T 39899   GB/T 21958   GB/T 15370.2   GB/T 21955   

Basic data

Standard ID GB/T 21957-2008 (GB/T21957-2008)
Description (Translated English) The fatigue-life testing method of the axle shaft and drive shaft on the test stand��wheeled agricultural tractor
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard T63
Classification of International Standard 65.060.10
Word Count Estimation 8,828
Date of Issue 2008-06-03
Date of Implementation 2009-01-01
Regulation (derived from) National Standard Approval Announcement 2008 No.9 (Total No.122)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the agricultural wheeled tractor axle and drive shaft bench fatigue test methods. This standard applies to agricultural wheeled tractor axle and drive shaft.

GB/T 21957-2008: The fatigue-life testing method of the axle shaft and drive shaft on the test stand，wheeled agricultural tractor


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The fatigue-life testing method of the axle shaft and drive shaft on the test stand, wheeled agricultural tractor ICS 65.060.10 T63 National Standards of People's Republic of China Agricultural wheeled tractors and axle shaft Bench fatigue test method Posted 2008-06-03 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The Standard Appendix A, Appendix B is an informative annex. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of the tractor. This standard was drafted. National Tractor Quality Supervision and Inspection Center. The main drafters of this standard. Jin Xiping, Wang wind and rain, Zhen. Agricultural wheeled tractors and axle shaft Bench fatigue test method

1 Scope

This standard specifies the Agricultural wheeled tractors and axle shaft fatigue life test bench method. This standard applies to agricultural wheeled tractor axle and drive shaft. 2 terms, definitions and symbols 2.1 Terms and Definitions When the sample surface cracking, displacement rate of change of the sample dynamic angle is greater than or equal to 10% or dynamic angular displacement of the sample carrying capacity Ming Significantly decreased life testing machine that does not work when. 2.2 Symbol Mj --- axle or drive shaft nominal torque, the unit is the Newton meter (N · m); Mw --- axle and drive shaft bear design moments, units of Newton meter (N · m); Wr --- drive axle load, in Newtons (N);  --- ground adhesion factor, taking  = 0.65; λ --- moment to torque conversion factor, taking λ = 1.15.

3 test purposes

In the following cases should be verified axle and drive shaft fatigue life. a) a new design or improve the design; b) changes in materials or workmanship; c) increasing the load capacity or extend the service life; d) the use of early detection of damage; e) After the plant production or long-term shutdown, resume production.

4 Number of test pieces

Specimen should manufacturers qualified products at random, the number of test specimens shall be not less than five.

5 Test methods

5.1 Test load Pulsating test using the cyclic loading, the relationship between load and time are shown in Figure 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21957-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21957-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21957-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21957-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.