Path: Home > GB/T > Page726 > GB/T 21684-2025 Home > Standard_List > GB/T > Page726 > GB/T 21684-2025

GB/T 21684-2025 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21684-2025: Four-side moulding machines for woodworking - Vocabulary and accuracy

GB/T 21684: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 21684-2025	English	279	Add to Cart	3 days [Need to translate]	Four-side moulding machines for woodworking - Vocabulary and accuracy		GB/T 21684-2025
GB/T 21684-2008	English	294	Add to Cart	3 days [Need to translate]	Woodworking machines -- Two-, three- and four-side moulding machines -- Nomenclature and acceptance conditions	Valid	GB/T 21684-2008

Basic data

Standard ID	GB/T 21684-2025 (GB/T21684-2025)
Description (Translated English)	Four-side moulding machines for woodworking - Vocabulary and accuracy
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J65
Classification of International Standard	79.120.10
Word Count Estimation	14,182
Date of Issue	2025-10-31
Date of Implementation	2026-05-01
Older Standard (superseded by this standard)	GB/T 21684-2008
Issuing agency(ies)	State Administration for Market Regulation and Standardization Administration of China

GB/T 21684-2025: Four-side moulding machines for woodworking - Vocabulary and accuracy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 79.120.10 CCSJ65 National Standards of the People's Republic of China Replaces GB/T 21684-2008 Terminology and Precision of Four-Sided Wood Milling Machine Published on 2025-10-31 Implemented on May 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4 General Requirements 5.Geometric accuracy inspection 4 Index 8 Figure 1 Example of a four-sided woodworking milling machine 2 Figure 2.Main components of a four-sided wood milling machine. Table 1 Geometric Accuracy Inspection 4

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document supersedes GB/T 21684-2008 "Terminology and Precision of Two-, Three-, and Four-Sided Milling Machines for Woodworking Machines" and is consistent with GB/T 21684- Compared to.2008, aside from structural adjustments and editorial changes, the main technical changes are as follows. ---The normative references have been changed (see 4.2, 4.7 and Table 1; 3.2, 3.7 and Table 2 in the.2008 edition); ---The terminology has been changed to "Terminology and Definitions," and the example diagram of the four-sided woodworking milling machine and related technical content have been revised (see Chapter 3). Chapter 4 of the.2008 edition); ---The phrase "Brief Description" has been changed to "General Requirements," and the relevant content descriptions have been revised (see Chapter 4, Chapter 3 of the.2008 edition); ---The inspection methods in the geometric accuracy inspection items have been changed (see Chapter 5, Chapter 5 of the.2008 edition); ---The simplified diagram and inspection items in geometric accuracy inspection item 16 have been revised (see Table 1, Item 16, Chapter 5,.2008 edition). G16); ---The work accuracy check has been removed (see 5.2 in the.2008 version). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee on Standardization of Woodworking Machine Tools and Cutting Tools (SAC/TC84). This document was drafted by. Fujian Provincial Academy of Mechanical Sciences, Guangdong Institute of Product Quality Supervision and Inspection, and Guangdong Ruiya Machinery Co., Ltd. Foshan Shunde Fuhao Woodworking Machinery Manufacturing Co., Ltd., and Foshan Shunde Wokneau Machinery Co., Ltd. The main drafters of this document are. Song Ting, Yin Zhihong, Zhou Huabiao, Wang Heping, Jiang Taiwu, and Wang Can. The release history of this document and the document it replaces is as follows. This document was first published in.2008, and this is its first revision. Terminology and Precision of Four-Sided Wood Milling Machine

1 Scope

This document defines the terminology for four-sided woodworking milling machines and their main components, specifies the geometric accuracy inspection and corresponding tolerances, and describes the relevant... The corresponding test method. This document applies to the precision inspection of general-purpose, ordinary-precision four-sided wood milling machines. This document is not applicable to operational tests of four-sided woodworking milling machines (such as inspections for vibration, abnormal noise, and component creep), nor is it applicable to... Machine tool characteristic inspection (such as speed, feed rate, etc.).

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 17421.1-2023 General Rules for Machine Tool Inspection - Part 1.Geometric Accuracy of Machine Tools under No-Load or Quasi-Static Conditions

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 A woodworking planer and/or milling machine that performs simultaneous machining on four sides of a workpiece in a single feed. The machine tool has at least four machining heads, distributed in... It has a rotating planer or milling cutter in four positions. top, bottom, left, and right. Note. The main components of the machine tool and their names are shown in Figures 1 and 2. 3.2 mainframe;body The main frame structure or main bed components in the bed section. 3.3 workbench table A component with a working plane for supporting and clamping workpieces. 3.4 Vertical cutter axis cutter block miling Vertically mounted planer shaft. 3.5 guide plate fence A plate-shaped component used to guide the workpiece to move in a certain direction; there is relative motion between it and the workpiece during feeding. 3.6 Table roller A cylindrical rotating component on the worktable that supports the workpiece.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21684-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21684-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21684-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21684-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 21684-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21684-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.