Path:
Home >
GB/T >
Page338 > GB/T 20333-2023
Home >
Standard_List >
GB/T >
Page338 > GB/T 20333-2023
GB/T 20333: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20333-2023 | English | 244 |
Add to Cart
|
3 days [Need to translate]
|
Taps for parallel and taper pipe threads general dimensions and marking
| Valid |
GB/T 20333-2023
|
| GB/T 20333-2006 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Taps for parallel and taper pipe threads -- General dimensions and marking
| Obsolete |
GB/T 20333-2006
|
PDF similar to GB/T 20333-2023
Basic data
| Standard ID | GB/T 20333-2023 (GB/T20333-2023) |
| Description (Translated English) | Taps for parallel and taper pipe threads general dimensions and marking |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | J41 |
| Classification of International Standard | 25.100.50 |
| Word Count Estimation | 12,154 |
| Date of Issue | 2023-05-23 |
| Date of Implementation | 2023-12-01 |
| Older Standard (superseded by this standard) | GB/T 20333-2006 |
| Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 20333-2023: Taps for parallel and taper pipe threads general dimensions and marking
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25:100:50
CCSJ41
National Standards of People's Republic of China
Replacing GB/T 20333-2006
Basic Dimensions and Designations of Taps for Cylindrical and Conical Pipe Threads
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 20333-2006 "Basic Dimensions and Signs of Taps for Cylindrical and Conical Pipe Threads", and GB/T 20333-
Compared with:2006, except for structural adjustment and editorial changes, the main technical changes are as follows:
--- Added a description of the ISO symbol for the logo (see Chapter 5):
This document is equivalent to ISO 2284:2017 "Basic dimensions and signs of hand taps for cylindrical and conical pipe threads":
The following minimal editorial changes have been made to this document:
--- Added Appendix NA (informative):
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Cutting Tool Standardization Technical Committee (SAC/TC91):
This document is drafted by: Yangzhou Jiangyu Cutting Tool Co:, Ltd:, Chengdu Xincheng Measuring Tools Co:, Ltd:, Shanghai Cutting Tool Factory Co:, Ltd:, Taizhou Shao
Shi Tools Co:, Ltd:, Heye Technology Co:, Ltd:, Jiangsu Sirite Tools Co:, Ltd:, and Yangzhou Xinjiangzheng Tools Co:, Ltd:
The main drafters of this document: Dong Xiangyang, Zhao Quan, Xu Yingen, Shao Jinkui, Liang Jingbin, Ni Yahui, Ni Dongsheng, Yang Yan:
This document was first published in:2006, and this is the first revision:
Basic Dimensions and Designations of Taps for Cylindrical and Conical Pipe Threads
1 Scope
This document specifies the basic dimensions and markings for taps for cylindrical and conical pipe threads:
This document applies to the following two types of taps:
---Cylindrical pipe thread taps (see Figure 1 and Table 1);
--- Conical pipe thread taps (see Figure 2 and Table 2):
The threads referred to above comply with ISO 7-1 and ISO 228-1:
Appendix A gives the calculation method of the dimensions of each part, and Appendix B gives the correspondence between this document and the ISO 13399 series of document symbols:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
Note: GB/T 4267-2004 The diameter of the shank of straight shank rotary tools and the size of the transmission square head (ISO 237:1975, IDT)
Note: GB/T 20334-2006 G series and Rp series pipe thread grinding tap thread size tolerance (ISO 5969:1979, IDT)
3 Terms and Definitions
This document does not have terms and definitions that need to be defined:
4 basic dimensions
The basic dimensions of each part of the tap are in Table 1 and Table 2: The dimensions of the shank of the tap and its square head shall be in accordance with ISO 237, with the following tolerances:
--- Tolerance of dimension d1:
● The precision shank tolerance is h9;
● Other shank tolerances are h11:
--- Tolerance of square head dimension a:
● h11;
● h12 (including shape and position error relative to the handle):
5 signs
Taps manufactured in accordance with this document and the requirements of ISO 5969 shall be marked on the shank as follows:
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB/T 20333-2023_English be delivered?
Answer: Upon your order, we will start to translate GB/T 20333-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB/T 20333-2023_English with my colleagues?
Answer: Yes. The purchased PDF of GB/T 20333-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version GB/T 20333-2023?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20333-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.