|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20002.6-2022: Guidelines for writing special aspects in standards - Part 6: Addressing the needs of micro, small and medium-sized enterprises
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20002.6-2022 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Guidelines for writing special aspects in standards - Part 6: Addressing the needs of micro, small and medium-sized enterprises
| Valid |
GB/T 20002.6-2022
|
PDF similar to GB/T 20002.6-2022
Basic data | Standard ID | GB/T 20002.6-2022 (GB/T20002.6-2022) | | Description (Translated English) | Guidelines for writing special aspects in standards - Part 6: Addressing the needs of micro, small and medium-sized enterprises | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 01.120 | | Word Count Estimation | 14,173 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 20002.6-2022: Guidelines for writing special aspects in standards - Part 6: Addressing the needs of micro, small and medium-sized enterprises
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 01.120
CCSA00
National Standards of People's Republic of China
Guidelines for writing specific content in the standard
Part 6.Addressing the needs of MSMEs
theneedsofmicro, smalandmedium-sizedenterprises, MOD)
Posted on 2022-12-30
2023-07-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General considerations 1
5 Aspects to be considered in the preparation of standardization documents 2
5.1 Preparation of new project proposals 2
5.2 Issues considered in the process of preparing standardized documents 2
5.3 Elements of standardization documents 3
5.4 Structure and presentation of standardized documents 4
6 Guidance and recommendations for the final review5
6.1 Determining when to apply a standardized document 5
6.2 Assist in the application of standardized documents 5
7 Checklist of aspects to consider6
Appendix A (Informative) List of Article Numbers Comparison 7
Appendix B (Informative) List of Technical Differences and Their Reasons 8
Reference 10
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
GB/T 20002 "Guidelines for Compiling Specific Content in Standards" and GB/T 1 "Standardization Work Guidelines", GB/T 20000 "Standardization
Operation Guide", GB/T 20001 "Standard Writing Rules", GB/T 20003 "Special Procedures for Standard Formulation" and GB/T 20004 "Group Standards"
Together, they constitute the basic national standard system that supports the formulation of standards.
This document is Part 6 of GB/T 20002 "Guidelines for Writing Specific Content in Standards" 1). GB/T 20002 has issued the following
part.
--- Part 1.Child Safety;
--- Part 2.The needs of the elderly and the disabled;
--- Part 3.Contents related to the environment in product standards;
--- Part 4.Safety-related content in the standard;
--- Part 6.involves the needs of small, medium and micro enterprises.
This document is modified to adopt ISO /IEC Guide 17.2016 "Guidelines for Standardization Considering the Needs of Micro, Small and Medium-sized Enterprises", and the document type is represented by
The ISO /IEC guideline is adjusted to the national standard of our guideline type.
Compared with ISO /IEC Guide 17.2016, this document has more structural adjustments. Comparison of chapter number changes between two files
See Appendix A for a list.
Compared with ISO /IEC Guide 17.2016, this document has more technical differences.
Marked with a single vertical line (|). See Appendix B for a list of these technical differences and their causes.
The following editorial changes have been made to this document.
--- In order to coordinate with existing standards, the name of the standard is changed to "Guidelines for the preparation of specific content in the standard Part 6.Involving small, medium and micro
Enterprise needs";
--- Increased the list of changes in the number of chapters and articles in Appendix A (informative);
--- Added Appendix B (informative) list of technical differences and their reasons;
---Deleted the definition of small and medium-sized enterprises in Appendix A (informative) of ISO /IEC Guide 17.2016.
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Standardization Principles and Methods Standardization Technical Committee (SAC/TC286).
This document is drafted by. China National Institute of Standardization, Zhongguancun Standardization Association, China Textile Industry Federation, Metallurgical Industry Planning Research Institute
Academy.
The main drafters of this document. Li Jia, Bai Dianyi, Wang Yiyi, Liu Shenzhai, Pang Zhenghu, Du Xiaoyan, Wang Hanhan, Sun Ximin, Niu Nana, Xiao Bangguo,
Che Di, Bai Demei, Liu Xize, Qiang Yi, Wang Wenli.
1) The name of the document of GB/T 20002 has been changed from "Drafting of Specific Contents in Standards" to "Guidelines for Writing Specific Contents in Standards", the listed Part 1
The main element of the document name assigned to Part 4 is currently still "Drafting of Specific Content in Standards", which will be adjusted to "Drafting of Specific Content in Standards" after revision
Writing Guidelines.
Introduction
One of the contents of standardization activities is to draft high-quality standardization documents in order to establish sound technical rules. In order to achieve this
Yes, my country has issued GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" and
GB/T 20001 "Standard Drafting Rules", establishes the general rules applicable to the drafting of various standardization documents and the rules applicable to the drafting of specific category standards.
Standardization document rules. However, the compilation of certain contents in standardization documents has its own characteristics and rules, which should be considered and given consideration when drafting documents.
It can be followed to ensure that the rules established by the standardization documents are more instructive, so as to achieve the purpose of drafting high-quality standardization documents.
GB/T 20002 "Guidelines for Writing Specific Content in Standards" is the goal of providing clear guidance when writing specific content
Standardized documents of the type of guideline developed. These specific contents mainly involve issues of concern at the policy level. One is public interest, such as
Safety, environmental protection, sustainable development, etc.; the second is to pay attention to vulnerable groups, such as the elderly, the disabled, and the needs of small, medium and micro enterprises.
GB/T 20002 is proposed to be divided into six parts in order to guide the preparation of relevant content in standardization documents involving the above-mentioned issues.
--- Part 1.Involves child safety. The purpose is to provide guidance and suggestions for the preparation of standardized documents related to child safety
or give relevant information.
--- Part 2.Involves accessibility. The purpose is to provide guidance, suggestions or give advice on the requirements related to accessibility in the preparation of standardized documents
relevant information.
--- Part 3.The environment is involved in product standards. The purpose is to provide guidance for writing product standardization documents related to the environment
guide, advise or give relevant information.
--- Part 4.Involves safety. The purpose is to provide guidance, suggestions or give relevant
related information.
--- Part 5.involves sustainability. The purpose is to provide guidance, advice or give
Related Information.
--- Part 6.involves the needs of small, medium and micro enterprises. The aim is to take into account the needs of MSMEs in the preparation of standardized documentation
Provide guidance, advice, or give relevant information.
Small, medium and micro enterprises have played an irreplaceable role in the number of enterprises, economic contribution, and labor usage. as a heavy
Important stakeholders, micro, small and medium-sized enterprises, like large enterprises, also need to benefit from the technical rules of standardized documents. For example, promoting a product
and service quality, improve business processes; obtain the latest technical information; express corporate demands, help compete with large enterprises, etc. But due to
Less consideration of the needs of MSMEs in the preparation of standardized documentation and the weaker position of MSMEs in the market
their position and their own human and financial resources, their participation in standardization activities is still relatively low, and they are not involved in the preparation or application of standardization documents.
It has not played its role in the economic and social development, and has to use the existing solutions in the market. Therefore, standardized
It is important to fully consider the needs of MSMEs and reflect their interests during the preparation of the documentation. However, our country does not have a special
Documents that take into account the needs of small, medium and micro enterprises in the preparation of standardized documents require the development of a standardized document to prepare more
Provides directional guidance when standardizing documents tailored to the needs of MSMEs.
This document is drafted on the basis of ISO /IEC Guide 17.2016 "Guidelines for the preparation of standards that take into account the needs of micro, small and medium-sized enterprises".
During the process, relevant content was studied and evaluated, and guidance and suggestions were provided for considering the needs of small, medium and micro enterprises in the preparation of standardization documents.
information, in order to make the principles and direction of the standardization document drafters clearer and clearer, so that the final standardization document is more suitable for China.
The application of small and micro enterprises promotes the application benefits of documents.
Guidelines for writing specific content in the standard
Part 6.Addressing the needs of MSMEs
1 Scope
This document provides general considerations when the needs of micro, small and medium-sized enterprises (SMEs)2) need to be considered in the drafting of standardization documents.
Aspects to be considered and guidance and recommendations for final review, and relevant information is given.
2) In the "Notice on Printing and Distributing the Regulations on Classification Standards for Small and Medium-sized Enterprises" (Gongxinbulianqi [2011] No. 300), small and medium-sized enterprises are divided into medium-sized, small, and micro
Three business types.
This document is applicable to standardization document drafters of standardization technical organizations such as standardization technical committees, sub-committees or working groups
Consider the needs of SMEs when compiling national, industry, local and group standardization documents, and also available for SMEs to participate in the drafting of standardization documents
refer to.
Note. The standardization documents referred to in this document include standards and standardization guiding technical documents.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 1.1 Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents
GB/T 20000.1 Guidelines for standardization work Part 1.General terms for standardization and related activities
3 Terms and Definitions
The terms and definitions defined in GB/T 1.1 and GB/T 20000.1 apply to this document.
4 Overall Considerations
Based on the purpose of the standardized document, the industries involved and the characteristics of the category, even for the same standardized document, when users apply it due to
The solutions formed by different internal environments may also be different. This requires the identification of different aspects of potential
For users, ensure that standardized documents are adapted to their needs and easily understood by them.
SMEs may have similar, but sometimes different, business models than other potential users of standardized documents. because
SMEs exist in almost all industries, so special attention needs to be paid to considering them as potential users of standardization documents in standardization documents.
interests, especially those of microenterprises. For example, consultancies, certification bodies
Institutions, testing or research laboratories may have different interests, and SMEs may exist in these enterprises, so these related issues need to be carefully considered.
interests of each of the relevant parties (especially the SMEs among them).
Since it may be difficult for SMEs, especially micro-enterprises, to directly make technical contributions to the standardization documentation process, drafting standards
Consultation on the needs and/or interests of SMEs through associations of SMEs and/or industry associations should be prioritized when developing documentation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20002.6-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 20002.6-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20002.6-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20002.6-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|