|
US$339.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20002.4-2015: Drafting for special aspects in standards -- Part 4: Safety aspects for their inclusion in standards
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20002.4-2015 | English | 339 |
Add to Cart
|
3 days [Need to translate]
|
Drafting for special aspects in standards -- Part 4: Safety aspects for their inclusion in standards
| Valid |
GB/T 20002.4-2015
|
PDF similar to GB/T 20002.4-2015
Basic data | Standard ID | GB/T 20002.4-2015 (GB/T20002.4-2015) | | Description (Translated English) | Drafting for special aspects in standards -- Part 4: Safety aspects for their inclusion in standards | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 01.120 | | Word Count Estimation | 16,115 | | Date of Issue | 2015-09-11 | | Date of Implementation | 2016-01-01 | | Older Standard (superseded by this standard) | GB/T 20000.4-2003 | | Quoted Standard | GB/T 1.1 | | Adopted Standard | ISO/IEC Guide 51-2014, MOD | | Regulation (derived from) | National Standard Announcement 2015 No.25 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard applies to the drafting of the relevant persons, property or the environment secure content. Note 1: This section may apply only to personal safety, or applicable to personal and property safety, or apply to persons, property and environmental safety. | GB/T 20002.4-2015: Drafting for special aspects in standards -- Part 4: Safety aspects for their inclusion in standards
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Drafting for special aspects in standards Part 4. Safety aspects for their inclusion in standards
ICS 01.120
A00
National Standards of People's Republic of China
Replacing GB/T 20000.4-2003
Drafting standards specific content
Part 4. Safety aspects Standard
Part 4. Safetyaspectsfortheirinclusioninstandards
(ISO /IEC Guide51.2014, Safetyaspects-
Guidelinesfortheirinclusioninstandards, MOD)
Issued on. 2015-09-11
2016-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 20002 "standard drafting specific content", GB/T 1 "Standardization Guide", GB/T 20000 "refers to standardization
South ", GB/T 20001" Rules for drafting standards "and GB/T 20003" special procedures "standards together constitute support the preparation of standards
Basic national standards.
GB/T 20002 "drafting standards specific content" is divided into the following sections.
--- Part 1. Child Safety;
--- Part 2. the elderly and needs of persons with disabilities;
--- Part 3. product standards related to the contents of the environment;
--- Part 4. Standard safety-related content.
This is Part 4 GB/T 20002 of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 20000.4-2003 "Standardization Guide Part 4. Standard safety-related content." versus
GB/T 20000.4-2003 compared to the main technical changes are as follows.
--- Modify the five definitions of terms, namely, "injury" "dangerous situation", "intended use" "residual risk", "protective measures" (see 3.1,
3.4,3.6,3.8,3.13, GB/T 20000.4-2003 the 3.3,3.6,3.13,3.9,3.8); the term "injury event" was changed to
"Dangerous incident" (see 3.3, GB/T 20000.4-2003 3.4); adds the term "inherently safe design" and "vulnerable consumer
Person "is defined (see 3.5 and 3.16);
--- Added "safe" explanation (see 4.1);
--- To increase the "risk factors" Discrimination statements and risk factors increased the illustrated structure (see Chapter 5);
--- Deleted the "security issue" principled statement (see GB/T 20000.4-2003 5.1);
--- Increasing the definition of "tolerable risk" scale and methods (see 6.2.2 - 6.2.5), and the "tolerable risk" to adjust the content of the statement
To 6.2.1 (see GB/T 20000.4-2003 5.2);
--- Adjust the "tolerable risk to achieve" structure of the content, this content is divided into "risk assessment and risk reduction cycle '' can
Allow risk "" reduce risk "and" verification "4 (see Chapter 6, GB/T 20000.4-2003 5.3 and Chapter 6);
--- Increased the principles of risk assessment and risk reduction, and risk reduction measures to verify the contents of the refinement tolerable risk of containing
Justice and measures to reduce risks, and revised the "Risk assessment and risk reduction cycle" diagram and "risk reduction process" diagram
(See Chapter 6, Figures 2 and 3, GB/T 20000.4-2003 Chapter 6, Figures 1 and 2);
--- Modified "warning" requirements used in the text, the words "use of the product and/or system is expected to sold country/region's official language,
Unless you use another language in order to more accurately describe a particular technical field "(see 7.4.2.3 2nd column items,
GB/T 20000.4-2003 the second column item 7.4.2.3);
--- Increased alert, warning safety alert symbol and description of the contents to a clearer guidelines drafted by the drafting standard involved
"Warning" part of the contents (see 7.4.2.3).
This section uses redrafted law revision using ISO /IEC Guide 51.2014 "concerning the safety of the secure content inclusion criteria
Guide. "
This part of ISO /IEC Guide 51.2014 main technical differences are as follows.
--- Increase Normative references GB/T 1.1 (see 7.4.1), in favor of a standard preparation of normative;
--- Revised ISO /IEC Guide 51.2014 Chapter 5 Figure 1, in order to better understand the relationship between risk factors.
This part of the National Standardization Technical Committee of Standardization Principles and Methods (SAC/TC286) and focal points.
This section drafted by. China National Institute of Standardization of Instrumentation Technology and Economy Institute, Shenzhen City, measuring Detection Technology
Surgery Ltd., Mechanical Science Research Institute.
The main drafters of this section. Pang Zheng Hu, a white house, Wuxue Jing, Ouyang Jinsong Liu Shen Zhai, Liu Zehua, Qiangyi, Zhang Jun, Ding Lu, Lu Xilin.
This part of the standard replaces the previous editions are.
--- GB/T 20000.4-2003.
Introduction
Treatment standards in security issues, there are many different forms, involving a wide field of technology and products, processes, services and/or systems (with
Hereinafter referred to as "the product and/or system"). To market products and/or systems become more complex, and therefore consider security issues is particularly important.
GB/T 20002 standard was drafted into the headquarters to provide practical guidance to help them secure content will involve the inclusion criteria.
The basic principles of this section also apply to other security issues considered at the same time for other stakeholders (such as designers, manufacturers, service
Service providers, policy makers and managers) also has an important reference value.
The method described in this section is intended to reduce the risk of product and/or system that may occur during use (including vulnerable consumers use).
This section is intended to reduce the product design and/or systems, manufacturing, distribution, use (including maintenance) and destruction or scrap that might arise
Risk, is considered a product and/or the entire life cycle of the system (including the intended use and reasonably foreseeable misuse). Whether production
Product and/or system is ready for the workplace, the home environment and leisure activities, the goal is to achieve the allowable wind for the person, property and the environment
Insurance, to minimize adverse effects on the environment.
Danger may bring a variety of security issues, and may vary depending on the end-user (including machine control products and/or systems
System integrity and product and/or the environment used by the system) and there are significant differences. While in the workplace may be to a greater extent
Control risk, but for the home environment or vulnerable consumers use the product and/or system situation is not easy to do. Therefore, this section may be required
To be supplemented by other publications for specific areas or users. Indicative list of these publications see "References."
This section is expected to apply to the drafting and revision of standards for all new standard developed by the project.
Each function to distinguish between "quality" and "security" these two words are very important. But the standard is necessary to consider the quality requirements to ensure that the beginning
Finally meet safety requirements.
Note 1. Throughout this document, the term "standards" includes standards and other technical documents standardization.
Note 2. The standard may specifically address security issues, and may also include specific provisions relating to security.
Note 3. Unless otherwise indicated, the terms used in this section "Committee" for the National Standardization Technical Committee, known as sub-technical committee or working group.
Drafting standards specific content
Part 4. Safety aspects Standard
1 Scope
GB/T 20002 standard drafters of this Part is divided into content security into standard provides requirements and recommendations.
This section applies to the drafting of the relevant persons, property or safety of the contents of the environment.
Note 1. This section may apply only to personal safety, or applicable to personal and property safety, or apply to persons, property and environmental safety.
Note 2. This part of the term "product and/or system" includes products, processes, services and/or systems.
Note 3. The security issues may also apply to long-term health consequences.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1.1 Standardization Guide Part 1. Standard structure and drafting
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Harm hurt
Damage to human health or damage to property or environmental damage.
3.2
Dangerous hazard
May cause harm (3.1) is a potential source.
3.3
Hazardous events hazardousevent
It can lead to injuries (3.1) events.
3.4
Dangerous situation hazardoussituation
Persons, property or the environment are exposed to one or more dangerous (3.2) in some cases.
3.5
Inherently safe design inherentlysafedesign
By changing the design or operation of products and/or systems, eliminating the risk of (3.2) and/or measures taken to reduce the risk of (3.9) and.
3.6
Intended use intendeduse
By product and/or the use of information provided by the system, the absence of such information, according to the commonly understood mode.
3.7
Reasonably foreseeable misuse reasonablyforeseeablemisuse
From readily predictable human behavior caused by failure to provide a way for parties to use the products and/or systems.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20002.4-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 20002.4-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20002.4-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20002.4-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|