|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19792-2012: Agricultural irrigation equipment -- Water-driven chemical injector pumps
Status: Valid GB/T 19792: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19792-2012 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Agricultural irrigation equipment -- Water-driven chemical injector pumps
| Valid |
GB/T 19792-2012
|
| GB/T 19792-2005 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
Agricultural irrigation equipment -- Water-driven chemical injector pumps
| Obsolete |
GB/T 19792-2005
|
PDF similar to GB/T 19792-2012
Basic data | Standard ID | GB/T 19792-2012 (GB/T19792-2012) | | Description (Translated English) | Agricultural irrigation equipment -- Water-driven chemical injector pumps | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B91 | | Classification of International Standard | 65.060.35 | | Word Count Estimation | 12,123 | | Older Standard (superseded by this standard) | GB/T 19792-2005 | | Quoted Standard | GB/T 7306.1; GB/T 7306.2; GB/T 9112; GB/T 9113; GB/T 9114; GB/T 9115; GB/T 9116; GB/T 9117; GB/T 9118; GB/T 9119; GB/T 9120; GB/T 9121; GB/T 9122; GB/T 9123; GB/T 9124; GB/T 1724.1; GB/T 1724.2; GB/T 1724.3; GB/T 1724.4; GB/T 1724.5; GB/T 1724.6; GB/T 172 | | Adopted Standard | ISO 13457-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies a hydrodynamic fertilizer pesticide injection pump (hereinafter referred to as hydrodynamic injection pump) structure, technical requirements and test methods. The hydrodynamic injection pump irrigation system is used to inject fer | GB/T 19792-2012: Agricultural irrigation equipment -- Water-driven chemical injector pumps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS65.060.35
B91
National Standards of People's Republic of China
Replacing GB/T 19792-2005
Agricultural irrigation equipment Hydrodynamic fertilizer - pesticide injection pump
(ISO 13457.2008, MOD)
Issued on. 2012-12-31 2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 19792-2005 "Agricultural irrigation equipment Hydrodynamic fertilizer - pesticide injection pump."
This standard compared with GB/T 19792-2005, the main technical difference except outside editorial changes as follows.
--- Adjusted normative references;
--- GB/T 19792-2005 7.1 provision of irrigation water and injection water temperature of 5 ℃ ~ 50 ℃, the provisions of this standard 7.1 Irrigation
Water injection and water temperature of 15 ℃ ~ 35 ℃;
--- Anti-leak test, the water is injected into the negative pressure applied to the pump outlet, GB/T 19792-2005 provisions 5kPa ~ 10kPa, this
Standard 10kPa (see 7.5.1);
--- The standard delete GB/T 19792-2005 7.2 Sampling and acceptance criteria;
--- Durability by the total running time of not less than 1000h should be changed to not less than 1150h (see 8.1).
This standard uses redrafted law revision adopted ISO 13457.2008 "Agricultural irrigation equipment Hydrodynamic fertilizer - pesticide injection pump" (English
Version).
This standard and ISO 13457.2008 for the difference.
--- On normative references, this standard has been adjusted technical differences, focus adjustments are reflected in Chapter 2, the specific
Adjustments as follows.
● with the GB/T 7306.1 ~ 7306.2-2000 equivalent used in place of ISO 7-1.1994;
● with non-conformance with international standards equivalent to GB/T 17241.1 ~ 17241.7-1998 replaced ISO 7005-
2. 1988;
● Increase GB/T 9112 ~ 9124 "steel pipe flanges."
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized.
This standard was drafted. Technical Research Center of Fluid Machinery Engineering, Jiangsu University, Chinese Academy of Agricultural Mechanization Sciences.
The main drafters of this standard. Wang Yang, Zhang Xian wins, blue only, Li, Wang Xinkun, Zhao Liwei, the Qingjiang, Chen Chao.
This standard replaces the standards previously issued as follows.
--- GB/T 19792-2005.
Agricultural irrigation equipment Hydrodynamic fertilizer - pesticide injection pump
1 Scope
This standard specifies the hydrodynamic fertilizer - pesticide injection pump (hereinafter referred to as hydrodynamic injection pump) structure, technical requirements and test methods for the moving of the water.
Injection pumps for irrigation system to inject fertilizer - pesticides and fertilizers - pesticides including liquid manure, fertilizer and acid solution composition, pesticides,
Grass like soluble pesticides.
This standard applies to the temperature does not exceed 50 ℃, irrigation systems and water containing commonly used type and concentration of chemical fertilizers and pesticides running
Hydrodynamic injection pump.
This standard does not apply to reflux preventing means, it does not apply to irrigation systems inject fertilizer - pesticides Venturi hydrodynamic devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 7306.1 ~ 7306.2 55 ° sealing pipe thread (GB/T 7306.1 ~ 7306.2-2000, eqvISO 7-1.1994)
GB/T 9112 ~ 9124 steel pipe flanges
GB/T 17241.1 ~ 17241.7 cast iron pipe flanges (GB/T 17241.1 ~ 17241.7-1998, ISO 7005-2. 1988,
NEQ)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Hydrodynamic injection pumps water-driveninjectorpump
Hydrodynamic fertilizer - pesticide injection pump water-drivenchemicalinjectorpump
Only rely on irrigation water energy to drive the piston, turbine and other hydraulic equipment, irrigation system to inject fertilizer - liquid pesticides acting pump.
3.2
Nominal size nominalsize
Series formula used to calibrate the water is fed to a conventional digital token pump size.
Note. This size is equal to the moving of the water injection pump and irrigation system threaded connection, flange or other connecting device nominal size.
3.3
Minimum Operating Pressure minimumworkingpressure
Pmin
When the water injection pump move declared by the manufacturer to function properly minimum hydrodynamic injection pump inlet pressure.
3.4
Maximum operating pressure maximumworkingpressure
Pmax
When the water injection pump move declared by the manufacturer to function properly hydrodynamic injection pump inlet maximum pressure.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19792-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 19792-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 19792-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19792-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 19792-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19792-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|