|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1927.6-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 6: Determination of shrinkage
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1927.6-2021 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for physical and mechanical properties of small clear wood specimens - Part 6: Determination of shrinkage
| Valid |
GB/T 1927.6-2021
|
PDF similar to GB/T 1927.6-2021
Basic data | Standard ID | GB/T 1927.6-2021 (GB/T1927.6-2021) | | Description (Translated English) | Test methods for physical and mechanical properties of small clear wood specimens - Part 6: Determination of shrinkage | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B68 | | Word Count Estimation | 10,126 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 1927.6-2021: Test methods for physical and mechanical properties of small clear wood specimens - Part 6: Determination of shrinkage
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for physical and mechanical properties of small clear wood specimens -- Part 6: Determination of shrinkage
ICS 79:040
CCSB68
National Standards of People's Republic of China
Replacing GB/T 1932-2009
Test method for physical and mechanical properties of wood with small sample without defect
Part 6: Determination of dry shrinkage
(ISO 13061-13:2016, Physical and mechanical properties of wood-
ISO 13061-14:2016, Physical and mechanical properties of wood-
Testmethodsforsmalclearwoodspecimens-
Part 14:Determinationofvolumetricshrinkage,MOD)
2021-12-31 Released 2022-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document is part 6 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects": GB/T 1927 has been issued
The following 15 parts are published:
--- Part 1: Collection of test materials;
--- Part 2: Sampling methods and general requirements;
--- Part 3: Determination of growth ring width and latewood rate;
--- Part 4: Determination of moisture content;
--- Part 5: Density determination;
--- Part 6: Determination of dry shrinkage;
--- Part 7: Determination of water absorption;
--- Part 8: Determination of swelling properties;
--- Part 9: Determination of flexural strength;
--- Part 10: Determination of flexural modulus of elasticity;
--- Part 12: Determination of transverse grain compressive strength;
--- Part 17: Determination of impact toughness;
--- Part 18: Determination of impact indentation;
--- Part 19: Determination of hardness;
--- Part 20: Determination of splitting resistance:
This document replaces GB/T 1932-2009 "Determination of dry shrinkage of wood", compared with GB/T 1932-2009, except for structural adjustment and
In addition to editorial changes, the main technical content changes are as follows:
a) the chapter "Terms and Definitions" was added (see Chapter 3);
b) changed the principle (see Chapter 4; Chapter 3 of the:2009 edition);
c) Changed the provisions on the size of the sample (see 6:1; 5:1 of the:2009 edition);
d) Added "Sample growth wheel tilt limit" (see 6:3);
e) Added "measurement site marking" (see 6:4);
f) The basis for determining the air-dry state has been changed (see 7:1:2; 5:2:2 of the:2009 edition);
g) Changed the basis for the determination of reaching the fully dry state (see 7:1:3; 5:2:3 of the:2009 edition);
h) Changed the "result calculation formula" (see 8:2; 6:3 of the:2009 edition):
This document is modified to adopt ISO 13061-13:2016 "Test methods for the physical and mechanical properties of wood with small specimens without defects - Part 13: Wood
Radial and chordwise drying shrinkage determination" and ISO 13061-14:2016 "Wood physical and mechanical properties test methods for small samples without defects Part 14
Points: Determination of volume shrinkage of wood:
Compared with ISO 13061-13:2016 and ISO 13061-14:2016, this document has the following structural adjustments:
a) Chapter 5 corresponds to Chapter 5 of ISO 13061-13 and 5:1 of ISO 13061-14;
b) Chapter 6 corresponds to Chapter 6 of ISO 13061-13 and 5:2 of ISO 13061-14;
c) 7:1 and 7:2 correspond to Chapters 7 and 8 of ISO 13061-13 respectively;
d) 8:1 and 8:2 correspond to 5:3 and 5:4 of ISO 13061-14 respectively;
e) Chapter 9 corresponds to Chapter 9 of ISO 13061-13 and Chapter 6 of ISO 13061-14:
The technical differences between this document and ISO 13061-13:2016 and ISO 13061-14:2016 and their reasons are as follows:
a) Normative references adopt the corresponding national standards: Because of the normative properties listed in ISO 13061-13 and ISO 13061-14
The cited document has been adopted by the national standard:
b) Added the provisions for the radial chordwise shrinkage and volume shrinkage of the sample from the water-saturated state to the air-dry state: Because our standard
Historical versions have this test method, which has application value:
c) Drainage method in Chapter 6 of ISO 13061-14 has been deleted: Because the specific measurement method is not specified in the ISO standard:
The following editorial changes have been made to this document:
--- In order to harmonize with the existing standards, the name of the standard is changed to "Test methods for physical and mechanical properties of wood with small samples without defects - Part 6: Dry
Shrinkage Determination";
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by the State Forestry and Grassland Administration:
This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41):
This document is drafted by: Wood Industry Research Institute, Chinese Academy of Forestry, Xiamen Minghongtang Arts & Crafts Co:, Ltd:, Jiangsu Brotherzhi
Neng Home Furnishing Co:, Ltd:, Suzhou David Wood Co:, Ltd:, Dehua Bunny Decoration New Material Co:, Ltd:, Jiusheng Flooring Co:, Ltd:, International
Bamboo and Rattan Center, Heilongjiang Academy of Forestry, Hebei Agricultural University, Beijing Forestry University, Anhui University of Technology, State Forestry and Grassland Administration
Industrial Planning and Design Institute, Harbin Engineering University:
The main drafters of this document: Yu Huaqiang, Fei Benhua, Liu Shengquan, Zhao Rongjun, Huang Rongfeng, An Xin, Li Xiaoling, Zhao Youke, Zhang Hua, Jiang Jiali,
Zhou Haibin, Huang Anmin, Gong Yingchun, Xing Xinting, Lu Wenhua, Huang Yanhui, Sun Zhaobin, Sun Jingcheng, Gu Chengyan, Huang Can, Yang Shuming, Jiang Wei, Jia Huanliang,
Shao Hailong, Zhang Hao, Sun Gaohui:
The previous versions of this document and its superseded documents are as follows:
--- First published in 1980 as GB/T 1932-1980, first revised in:1991, second revised in:2009;
--- This is the third revision, adjusted to Part 6 of GB/T 1927:
Introduction
The standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc:
It is widely used and is an important basic standard in the wood industry: In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood:
The domestic standard (GB/T 1927~GB/T 1943) was revised twice in:1991 and:2009 respectively: In recent years, with the development of wood science and technology
The development of technology, ISO 3129:2012 "Sampling method for physical and mechanical testing of wood with small samples of wood without defects"
Methods and general requirements" was revised, ISO 3130:1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131:1975
15 international standards for test methods such as "Determination of Density in Physical and Mechanical Tests of Wood" have been integrated and revised: Based on this, in order to connect with international standards
This time, the third revision of the national standard for test methods for physical and mechanical properties of wood in my country will be carried out, and the 22 scattered test methods will be integrated and adjusted:
The whole is a sub-part document of GB/T 1927, and the latest version of the international standard has been adopted in the revision:
GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts:
--- Part 1: Collection of test materials: The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects:
--- Part 2: Sampling methods and general requirements: The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects:
Specimen sawing, interception methods and general requirements to be observed when testing methods:
--- Part 3: Determination of growth ring width and latewood rate: The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood
method of determination:
--- Part 4: Determination of moisture content: The purpose is to describe a method for the determination of the moisture content of small wood samples without defects:
--- Part 5: Density determination: The purpose is to describe the density, air-dry density, absolute dry
Methods for the determination of density and basic density:
--- Part 6: Determination of dry shrinkage: The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood:
determined method:
--- Part 7: Determination of water absorption: The purpose is to describe the determination method of 6h, 24h and the maximum water absorption rate of small sample wood without defect:
--- Part 8: Determination of swelling: The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples:
determined method:
--- Part 9: Determination of flexural strength: The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects:
--- Part 10: Determination of flexural modulus of elasticity: The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects:
--- Part 11: Determination of compressive strength along grain: The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects:
--- Part 12: Determination of transverse grain compressive strength: The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including
Methods for the determination of the total compressive proportional ultimate strength of the horizontal grain and the partial compressive proportional ultimate strength of the horizontal grain:
--- Part 13: Determination of compressive elastic modulus of transverse grains: The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood:
determined method:
--- Part 14: Determination of tensile strength along grain: The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood:
--- Part 15: Determination of transverse grain tensile strength: The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects:
--- Part 16: Determination of shear strength along grain: The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects:
--- Part 17: Determination of impact toughness: The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples:
--- Part 18: Determination of impact indentation: The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood:
--- Part 19: Determination of hardness: The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples:
--- Part 20: Determination of splitting resistance: The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects:
--- Part 21: Determination of nail holding force: The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects:
Test method for physical and mechanical properties of wood with small sample without defect
Part 6: Determination of dry shrinkage
1 Scope
This document describes the principles, test equipment, specimens, and test procedures for the determination of the radial, chordwise and volumetric drying shrinkage of small unblemished wood samples:
procedures, calculation of results, recording and reporting of test results, etc:
This document is applicable to the radial and chordwise shrinkage and volume drying of small sample wood from water-saturated (or green) state to air-dry and full-dry state:
Determination of shrinkage:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
GB/T 1927:2-2021 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2: Sampling methods and general requirements
(ISO 3129:2019, MOD)
Note 1: There is no technical difference between the quoted content of GB/T 1927:2-2021 and the quoted content of ISO 3129:2012:
GB/T 1927:4-2021 Test methods for physical and mechanical properties of wood with small samples without defects - Part 4: Determination of moisture content
(ISO 13061-1:2014, MOD)
Note 2: There is no technical difference between the quoted content of GB/T 1927:4-2021 and the quoted content of ISO 13061-1:2014:
LY/T 1788 Terms for wood properties
3 Terms and Definitions
Terms and definitions defined in LY/T 1788 apply to this document:
4 Principles
4:1 Radial and chordwise shrinkage
The radial and chordwise shrinkage of the wood is expressed as the radial and chordwise shrinkage of the wood:
Measure the radial and chord dimensions of wood in a water-saturated (or green) state, in an air-dry state, and in a fully dry state: Saturate with sample
The ratio of the radial or chordwise dimensional change to the saturated water (or green) size when the water (or green wood) state is completely dry, indicating the radial or chordwise total dryness of the sample
Dry shrinkage ratio: the ratio of the radial or chordwise dimensional change of the sample from the water-saturated (or green wood) state to the air-dry state to the size of the water-saturated (or green wood) state, table
Shows the air-drying shrinkage of the sample in the radial or chord direction: The initial measurement should be carried out in a saturated (or green) state, and the final measurement should be made in a fully dry state
conduct:
4:2 Volume shrinkage
The volume shrinkage of wood is expressed as the volume shrinkage of wood:
Measure the volume of wood in a water-saturated (or green) state, in an air-dry state, and in a fully dry state: Take the sample from the saturated (or green) state
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.6-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.6-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1927.6-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.6-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|