|
US$179.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1927.15-2022: Test methods for physical and mechanical properties of small clear wood specimens - Part 15: Determination of tensile strength perpendicular to grain
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1927.15-2022 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for physical and mechanical properties of small clear wood specimens - Part 15: Determination of tensile strength perpendicular to grain
| Valid |
GB/T 1927.15-2022
|
PDF similar to GB/T 1927.15-2022
Basic data | Standard ID | GB/T 1927.15-2022 (GB/T1927.15-2022) | | Description (Translated English) | Test methods for physical and mechanical properties of small clear wood specimens - Part 15: Determination of tensile strength perpendicular to grain | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B68 | | Word Count Estimation | 9,966 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 1927.15-2022: Test methods for physical and mechanical properties of small clear wood specimens - Part 15: Determination of tensile strength perpendicular to grain
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for physical and mechanical properties of small clear wood specimens - Part 15.Determination of tensile strength perpendicular to grain
ICS 79.040
CCSB68
National Standards of People's Republic of China
Replacing GB/T 14017-2009
Test method for physical and mechanical properties of wood with small sample without defect
Part 15.Determination of cross-grain tensile strength
2022-07-11 Released 2023-02-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 15 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects". GB/T 1927 has been issued
The following parts are distributed.
--- Part 1.Collection of test materials;
--- Part 2.Sampling methods and general requirements;
--- Part 3.Determination of growth ring width and latewood rate;
--- Part 4.Determination of moisture content;
--- Part 5.Density determination;
--- Part 6.Determination of dry shrinkage;
--- Part 7.Determination of water absorption;
--- Part 8.Determination of swelling properties;
--- Part 9.Determination of flexural strength;
--- Part 10.Determination of flexural modulus of elasticity;
--- Part 11.Determination of compressive strength along grain;
--- Part 12.Determination of transverse grain compressive strength;
--- Part 13.Determination of compressive elastic modulus of transverse grains;
--- Part 14.Determination of tensile strength along grain;
--- Part 15.Determination of transverse grain tensile strength;
--- Part 16.Determination of shear strength along grain;
--- Part 17.Determination of impact toughness;
--- Part 18.Determination of impact indentation;
--- Part 19.Determination of hardness;
--- Part 20.Determination of splitting resistance;
--- Part 21.Determination of nail holding force.
This document replaces GB/T 14017-2009 "Test Method for Tensile Strength of Wood Horizontal Grain". Compared with GB/T 14017-2009,
In addition to structural adjustments and editorial changes, the main technical changes are as follows.
--- Added terms and definitions (see Chapter 3);
--- Added the description and requirements that the moisture content of the sample can be green (see 6.3);
--- Changed the requirements for the loading time range (see 7.3, 6.3 of the.2009 edition);
--- Increase the sampling requirements for the measurement of moisture content and density after the tensile strength test of the transverse grain of the sample (see 7.5);
--- Changed the accuracy requirements for cross-grain tensile strength results (see 8.1 and 8.2, 7.1 and 7.2 of the.2009 edition);
--- Changed the effective range of sample moisture content when the tensile strength of the transverse grain of the sample is converted to a unified value (12% moisture content) (see 8.2,.2009
7.2 of the year edition);
--- Added the specific content of the test result record and report (see Chapter 9);
---The test record table for transverse grain tensile strength of wood has been changed from a normative appendix to an informative appendix (see Appendix A,.2009 edition of
Appendix A).
This document is modified to adopt ISO 13061-7.2014 "Test methods for the physical and mechanical properties of wood with small defect-free specimens - Part 7.Horizontal grain
Determination of Ultimate Tensile Stress.
The technical differences between this document and ISO 13061-7.2014 and the main reasons are as follows.
--- Updated the schematic diagram of the sample (see Figure 1). The schematic diagram of the sample is combined with ISO 13061-7 on the basis of GB/T 14017-2009.
In.2014, for the size requirements of the sample, a new sample size specification was formed, which is more conducive to understanding the test equipment and operation steps.
step, and in line with international standards.
--- Follow the moisture content correction coefficient of GB/T 14017-2009 to make the transverse grain tensile strength of samples with different moisture contents in the radial and chord directions
The conversion is more precise.
The following editorial changes have been made to this document.
--- In order to harmonize with the existing standards, the name of the standard is changed to "Test methods for physical and mechanical properties of wood with small samples without defects - Part 15.Horizontal
Determination of Grain Tensile Strength.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the State Forestry and Grassland Administration.
This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41).
This document was drafted by. Northeast Forestry University, Aoyi Home Furnishing (Huzhou) Co., Ltd., International Bamboo and Rattan Center, Xiamen Minghongtang Arts & Crafts Co., Ltd.
Company, Suzhou David Wood Co., Ltd., Anhui Agricultural University, Harbin Engineering University.
The main drafters of this document. Guo Minghui, Sun Longxiang, Du Wenxin, Liu Zhenbo, Jiang Zehui, Fei Benhua, Xu Bin, Wang Youhong, Wu Zhongqi, Huang Can,
Yu Lichun and Sun Gaohui.
The previous versions of this document and its superseded documents are as follows.
--- First published in.1992 as GB/T 14017-1992, first revised in.2009;
--- This is the second revision, adjusted to Part 15 of GB/T 1927.
Introduction
The standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc.
It is widely used and is an important basic standard in the wood industry. In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood.
The domestic standard (GB/T 1927~GB/T 1943) was revised twice in.1991 and.2009 respectively. In recent years, with the development of wood science and technology
The development of technology, ISO 3129.2012 "Sampling methods for wood physical and mechanical tests of small samples of wood without defects and
"General Requirements" has been revised, ISO 3130.1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131.1975 "Wood
15 international standards for test methods such as "Determination of Density in Physical and Mechanical Tests" have been integrated and revised. Based on this, in order to be in line with international standards, this time
The third revision was made to the national standard for test methods for physical and mechanical properties of wood in my country, and the 22 scattered test method standards were integrated and adjusted to
The sub-part document of GB/T 1927 adopts the latest version of the international standard in the revision.
GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts.
--- Part 1.Collection of test materials. The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects.
--- Part 2.Sampling methods and general requirements. The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects.
Specimen sawing, interception methods and general requirements to be observed when testing methods.
--- Part 3.Determination of growth ring width and latewood rate. The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood
method of measurement.
--- Part 4.Determination of moisture content. The purpose is to describe a method for the determination of the moisture content of small wood samples without defects.
--- Part 5.Density determination. The purpose is to describe the density, air-dry density, absolute dry
Methods for the determination of density and basic density.
--- Part 6.Determination of dry shrinkage. The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood.
determined method.
--- Part 7.Determination of water absorption. The purpose is to describe the determination method of 6h, 24h and the maximum water absorption of small sample wood without defects.
--- Part 8.Determination of swelling. The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples.
determined method.
--- Part 9.Determination of flexural strength. The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects.
--- Part 10.Determination of flexural modulus of elasticity. The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects.
--- Part 11.Determination of compressive strength along grain. The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects.
--- Part 12.Determination of transverse grain compressive strength. The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including
Methods for the determination of the total compressive proportional ultimate strength of the horizontal grain and the partial compressive proportional ultimate strength of the horizontal grain.
--- Part 13.Determination of compressive elastic modulus of transverse grains. The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood.
determined method.
--- Part 14.Determination of tensile strength along grain. The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood.
--- Part 15.Determination of transverse grain tensile strength. The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects.
--- Part 16.Determination of shear strength along grain. The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects.
--- Part 17.Determination of impact toughness. The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples.
--- Part 18.Determination of impact indentation. The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood.
--- Part 19.Determination of hardness. The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples.
--- Part 20.Determination of splitting resistance. The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects.
--- Part 21.Determination of nail holding force. The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects.
Test method for physical and mechanical properties of wood with small sample without defect
Part 15.Determination of cross-grain tensile strength
1 Scope
This document describes the principles, test equipment, sample preparation, test procedures, and calculation of results for the determination of the transverse grain tensile strength of small unblemished wood samples.
And test results records and reports.
This document applies to the determination of the transverse grain tensile strength of unblemished small samples of wood.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 1927.2-2021 Test methods for physical and mechanical properties of wood with small unblemished samples - Part 2.Sampling methods and general requirements
(ISO 3129.2019, MOD)
GB/T 1927.4-2021 Test methods for physical and mechanical properties of wood with small samples without defects - Part 4.Determination of moisture content
(ISO 13061-1.2014, MOD)
GB/T 1927.5-2021 Test methods for the physical and mechanical properties of wood with small unblemished samples - Part 5.Determination of density (ISO 13061-
2.2014, MOD)
LY/T 1788 Terms for wood properties
3 Terms and Definitions
Terms and definitions defined in LY/T 1788 apply to this document.
4 Principles
Apply tensile force at a uniform speed to failure along the direction of the transverse grain of the sample, and obtain the transverse grain tensile strength of the wood.
5 Test equipment
5.1 Testing machine
The accuracy of measuring the load shall meet the requirements of Chapter 5 of GB/T 1927.2-2021.In order to ensure tension along the longitudinal axis of the sample, the clamping device
There should be movable joints and the sample can be clamped with screw clamps without slippage during the test.
5.2 Measuring tools
Vernier calipers or other measuring tools should be accurate to 0.1mm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.15-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.15-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1927.15-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.15-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|