HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 18851.6-2014 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18851.6-2014: Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 Celsius
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 18851.6-2014English209 Add to Cart 3 days [Need to translate] Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 Celsius Valid GB/T 18851.6-2014

PDF similar to GB/T 18851.6-2014


Standard similar to GB/T 18851.6-2014

GB/T 19348.1   GB/T 19096   GB/T 18851.2   GB/T 18851.1   GB/T 18851.5   

Basic data

Standard ID GB/T 18851.6-2014 (GB/T18851.6-2014)
Description (Translated English) Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 Celsius
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J04
Classification of International Standard 19.100
Word Count Estimation 9,961
Date of Issue 5/6/2014
Date of Implementation 12/1/2014
Quoted Standard GB/T 5097; GB/T 18851.1; GB/T 18851.2; GB/T 18851.3
Adopted Standard ISO 3452-6-2008, MOD
Regulation (derived from) National Standards Bulletin No. 9 2014
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the identification methods specific to low temperatures (below 10��C) testing requirements and the appropriate testing of the product. This Standard applies only consistent with the product manual temperature range.

GB/T 18851.6-2014: Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 Celsius


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing Penetrant testing Part 6. Penetrant testing at temperatures lower than 10 Celsius ICS 19.100 J04 National Standards of People's Republic of China NDT penetrant testing Part 6. temperature below 10 ℃ of penetrant testing Part 6. Penetranttestingattemperatureslowerthan10 ℃ (ISO 3452-6.2008, MOD) Issued on. 2014-05-06 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 18851 "NDT penetrant testing" is divided into the following six sections. --- Part 1. General; --- Part 2. Testing of penetrant materials; --- Part 3. Reference test blocks; --- Part 4. equipment; --- Part 5. penetrant testing temperature is above 50 ℃ of; --- Part 6. temperature below 10 ℃ of penetrant testing. This section GB/T 18851 Part 6. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted Law Amendment uses ISO 3452-6.2008 "Non-destructive testing - Penetrant testing - Part 6. temperature below 10 ℃ Penetration Detection "(in English). This part of ISO 3452-6.2008 and the technical differences for the following reasons. --- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● equivalents adoption of international standards GB/T 5097 instead of ISO 3059 (see 4.1,4.2.5 and 5.4.3); ● equivalents adoption of international standards GB/T 18851.1 replaces ISO 3452-1 (see section 3.1); ● equivalents adoption of international standards GB/T 18851.2 replaces ISO 3452-2 (see Chapter 6); ● equivalents adoption of international standards GB/T 18851.3 replaces ISO 3452-3 (see 5.2). This part of the National NDT Standardization Technical Committee (SAC/TC56) and focal points. This section is drafted. Baosteel Group Shanghai Jinyi Detection Technology Co., Ltd., Shanghai New Metal detection equipment Limited, Shanghai Material Institute, Friends of the Shanghai-Industrial Group Co., Ltd., Shanghai Key Laboratory of engineering materials application evaluation, Shanghai Wei Cheng Banda detection technology Limited. The main drafters of this section. Zhang Yifeng, Luo Yundong at Po Hong, Zhou Wei, SHAO Airlines, Jinyu Fei, Li Li, Zhao.

Introduction

When the temperature is below 10 ℃, performance penetrant testing materials will be affected. GB/T 18851.1 and GB/T 18851.2 provides 10 ℃ ~ 50 ℃ osmotic material use and testing. This section GB/T 18851 is made less than 10 ℃ penetration and detection material application. This section describes the operating temperature associated with product penetration testing process, and how the user to confirm product specification Recommended The process parameters (process method) is applicable. Penetrant testing is to ensure that the product can detect low quality specially developed products, but penetration testing product that can be used at room temperature, In some cases, for low temperature detection. NDT penetrant testing Part 6. temperature below 10 ℃ of penetrant testing

1 Scope

This section GB/T 18851 regulations dedicated to low temperatures (below 10 ℃) testing requirements and the appropriate product testing party identification law. This section applies only to coincide with the product manual temperature range.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5097 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (GB/T 5097-2005, ISO 3059.2001, IDT) GB/T 18851.1 destructive testing - Penetrant testing - Part 1. General (GB/T 18851.1-2012, ISO 3452-1.2008, IDT) GB/T 18851.2 - Part 2 NDT penetration testing. Testing of penetrant materials (GB/T 18851.2-2008, ISO 3452-2.2006, IDT) GB/T 18851.3 destructive testing - Penetrant testing - Part 3. Reference test blocks (GB/T 18851.3-2008, ISO 3452-3. 1998, IDT)

3 low temperature penetrant testing

3.1 General Unless otherwise provided in this section or product specification, otherwise GB/T 18851.1 of the General always applicable. Manufacturer is responsible for the identification test, if the penetration of the product within the specified range is not necessary to use in the field again for examination. 3.2 Technical principles You may encounter some special problems at low temperatures. a) the presence of moisture or ice detection surface; b) compared with the higher temperatures, the rate of non-volatile solvent and water-based developer of low wet; c) When using spray cans, spray pressure and quality may be affected; d) at operating temperature, some penetrant may precipitate, in this case, it should be within the range of standard temperature (10 ℃ ~ 50 ℃) Tested. 3.3 Safety Warning All about health and safety and environmental protection requirements shall comply with relevant international, national and local regulations. Based on different temperature ranges, special provisions should be enforced. a) When using a heating device (whether the subject is heating element, material or work environment), should be prohibited detecting sprays and volatile matter and fire

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18851.6-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18851.6-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18851.6-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18851.6-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.