US$559.00 · In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18029.9-2008: Wheelchairs -- Part 9: Climatic tests for electric wheelchairs Status: Obsolete
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 18029.9-2008 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Wheelchairs -- Part 9: Climatic tests for electric wheelchairs
| Obsolete |
GB/T 18029.9-2008
|
PDF similar to GB/T 18029.9-2008
Basic data Standard ID | GB/T 18029.9-2008 (GB/T18029.9-2008) | Description (Translated English) | Wheelchairs -- Part 9: Climatic tests for electric wheelchairs | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | Y14 | Classification of International Standard | 11.180 | Word Count Estimation | 14,197 | Date of Issue | 2008-09-19 | Date of Implementation | 2009-03-01 | Older Standard (superseded by this standard) | GB/T 15495-1995 | Quoted Standard | ISO 7176-11-1992; ISO 7176-15-1996; ISO 7176-22-2000; ISO 7176-26-2007; IEC 60529-2001 | Adopted Standard | ISO 7176-9-2001, IDT | Regulation (derived from) | National Standard Approval Announcement 2008 No.17 (Total No.130) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the determination of rain, condensation and temperature changes in the limit by one person, the maximum speed not exceeding 15km/h wheelchair vehicles (including electric scooter) The basic function of the requirements and test methods. This part of the GB/T 18029 does not include corrosion resistance requirements. |
GB/T 18029.9-2008: Wheelchairs -- Part 9: Climatic tests for electric wheelchairs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wheelchairs Part 9. Climatic tests for electric wheelchairs
ICS 11.180
Y14
National Standards of People's Republic of China
GB/T 18029.9-2008/ISO 7176-9.2001
Replacing GB/T 15495-1995
Wheelchairs
Part 9. Test methods for electric wheelchairs climate
(ISO 7176-9.2001, IDT)
Posted 2008-09-19
2009-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Principle 1
5 Facilities 1
6 wheelchair test preparation 2
7 Test Method 3
8 4 function tests
9 inspection reports 5
10 publication of the results 5
Appendix NA (informative) water spray apparatus and method for testing 6
GB/T 18029.9-2008/ISO 7176-9.2001
Foreword
GB/T 18029 "wheelchair" consists of the following components.
Part 1. Determination of static stability
Part 2. Determination of dynamic stability of electric wheelchairs
Part 3. Determination of brakes
Determination of energy. Part 4
Part 5. Determination of dimensions, mass and turning space
Determination of electric wheelchairs maximum speed, acceleration and deceleration. Part 6
Part 7. Measurement of seating and wheel sizes methods
Part 8. static strength, impact strength and fatigue strength requirements and test methods
Part 9. Climatic tests for electric wheelchairs Method
Determination of electric wheelchair obstacle capacity. Part 10
Part 11. Test dummies
Part 13. Determination of the test surface coefficient of friction
Part 14. Electric power wheelchairs and control systems - Requirements and test methods
Part 15. information dissemination, and labeling requirements documents issued
Part 16. Block (by) pad flame retardancy requirements and test methods
Part 17. Electric wheelchair controller interface
Part 18. The downstairs unit
Part 19. Wheeled mobile device for a motor vehicle
Part 20. Determination of standing wheelchairs Performance
Part 21. Electromagnetic compatibility requirements and test methods
Part 22. Adjusting program
Part 23. Requirements and test methods for stair climbing device caregiver operation
Part 24. Requirements and test methods occupant operated stair climbing device
Part 25. Battery and charger requirements and test methods
Part 26. Terminology
Part is divided into 9 parts.
2001 "Wheelchairs - Part 9.. electric wheelchairs climatic test methods" (in English) of this section is equivalent ISO 7176-9 adoption.
This Part replaces GB/T 15495-1995 "electric wheelchairs climatic test methods."
This section compared with the original GB/T 15495-1995, the main differences are.
In this section all the technical indicators, parameters, formulas, performance requirements, test methods, inspection rules made in accordance with the principles specified in ISO 7176
set. Compared with the original national standard, this section has changed greatly.
a) increase the standard definition of control devices and environmental conditions.
b) The section on the "standard environmental conditions" has been revised, the original standard environment standard for 23 ℃, relative humidity of 50%, while in the present
Section standard environmental conditions (20 ± 5) ℃, relative humidity of (60 ± 20)%.
c) increasing the facility chapter.
d) test method for rain conditions, the low temperature environment, high temperature working environment, low temperature storage conditions, five kinds of high-temperature storage test environment
Test environment has been revised, the high and low temperature environment and storage environment were tested concretely defined.
GB/T 18029.9-2008/ISO 7176-9.2001
e) a description of function test increases, and the refinement of the specific methods of operation.
f) for intuitive and easy to use, this section IEC 60529.2001 for water spray test equipment and methods as an appendix NA.
This section is informative Annex NA appendix.
This section proposed by the People's Republic of China Ministry of Civil Affairs.
This part of the National Rehabilitation and special equipment Standardization Technical Committee on Persons with Disabilities (SAC/TC148) centralized.
This part mainly drafted by. National Rehabilitation Aids Research Center, Shanghai Medical Devices Co., Ltd. each state.
The main drafters of this section. Yan peaceful valley Huiru, Yangcheng Rui Zhao Shun times.
This section was first released in 1995.
This section first revision.
GB/T 18029.9-2008/ISO 7176-9.2001
Introduction
Wheelchairs may be used in harsh environments or storage, which can seriously affect their function, sometimes dangerous.
Using these test methods to determine whether a wheelchair and to what extent vulnerable to environmental conditions.
Operational test under the rain, hot and cold conditions to simulate usage in a wide range of climate change on Earth conditions.
GB/T 18029.9-2008/ISO 7176-9.2001
Wheelchairs
Part 9. Test methods for electric wheelchairs climate
1 Scope
This section GB/T 18029 specifies the determination rain, condensation and temperature changes in the limit by one person, does not exceed the maximum speed of 15km/h for
Wheelchairs (including electric scooter) requirements and test methods Basic Function.
This section GB/T 18029 does not include requirements for corrosion resistance.
2 Normative references
The following documents contain provisions which, through reference GB/T 18029 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, we are encouraged to reach agreement under this section
All parties that proposed to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
ISO 7176-11.1992 Wheelchairs - Part 11. Test dummies (Wheelchairs Part 11. Testdummies)
ISO 7176-15.1996 Wheelchairs - Part 15. information dissemination, requirements documents and issued identity (Wheelchairs Part
15. Requirementsforinformationdisclosure, documentationandlabeling)
ISO 7176-22.2000 Wheelchairs - Part 22. Adjusting program (Wheelchairs Part 22. Set-upprocedures)
ISO 7176-26.2007 Wheelchairs - Part 26. Terminology (Wheelchairs Part 26. Vocabulary)
IEC 60529.2001 Housing protection (IP code) (Degreesofprotectionprovidedbyenclosures (IP
Code))
3 Terms and Definitions
ISO 7176-26.2007 is defined and determined the following definitions apply to this part of the GB/T 18029 is.
3.1
Wheelchair user to control at a desired speed and (or) the direction of movement of the device.
3.2
Environmental conditions (20 ± 5) ℃, relative humidity of (60 ± 20)%.
Principle 4
Test after normal use, storage and transport ambient conditions wheelchair functions.
5 Facilities
5.1 Test track. as shown in Figure 1 mark, under standard ambient conditions to form a flat and level surface.
Note. for the production floor or indoor leisure typical building. For example, concrete or asphalt surface is used.
GB/T 18029.9-2008/ISO 7176-9.2001
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18029.9-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 18029.9-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18029.9-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18029.9-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|