|
US$254.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17286.3-2010: Liquid hydrocarbons -- Dynamic measurement -- Proving system for volumetric meters -- Part 3: Pulse interpolation techniques
Status: Valid GB/T 17286.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17286.3-2010 | English | 254 |
Add to Cart
|
3 days [Need to translate]
|
Liquid hydrocarbons -- Dynamic measurement -- Proving system for volumetric meters -- Part 3: Pulse interpolation techniques
| Valid |
GB/T 17286.3-2010
|
| GB/T 17286.3-1998 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 3: Pulse interpolation techniques
| Obsolete |
GB/T 17286.3-1998
|
PDF similar to GB/T 17286.3-2010
Basic data | Standard ID | GB/T 17286.3-2010 (GB/T17286.3-2010) | | Description (Translated English) | Liquid hydrocarbons -- Dynamic measurement -- Proving system for volumetric meters -- Part 3: Pulse interpolation techniques | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E98 | | Classification of International Standard | 75.180.30 | | Word Count Estimation | 13,127 | | Date of Issue | 2010-09-02 | | Date of Implementation | 2010-12-01 | | Older Standard (superseded by this standard) | GB/T 17286.3-1998 | | Quoted Standard | GB/T 17746-1999 | | Adopted Standard | ISO 7278-3-1998, IDT | | Regulation (derived from) | National Standard Approval Announcement 2010 No.4 (Total No.159) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of the method and conditions of pulse insertion technology. In the conventional system or a small volume prover volume test tube turbine or positive displacement flowmeter, in order to improve the resolution of the flowmeter, the application of pulse insertion technology. When other forms of test meter, the method may also be provided in the reference section. This section describes the three most commonly used pulse insertion technique and their conditions of use. It also describes the method of testing equipment and calibration pulse into the system used to run the state. Also described methods for measuring irregularities of the meter pulse intervals. | GB/T 17286.3-2010: Liquid hydrocarbons -- Dynamic measurement -- Proving system for volumetric meters -- Part 3: Pulse interpolation techniques
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Liquid hydrocarbons.Dynamic measurement.Proving system for volumetric meters.Part 3. Pulse interpolation techniques
ICS 75.180.30
E98
National Standards of People's Republic of China
Replace GB/T 17286.3-1998
Dynamic measurement of liquid hydrocarbons
Volumetric flowmeter verification system
Part 3. Pulse insertion technique
Part 3. Pulseinterpolationtechniques
(ISO 7278-3.1998, IDT)
2010-09-02 released.2010-12-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration issued
Content
Foreword III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Principle 2
5 Conditions of use 4
6 Requirements for flowmeters 5
7 pulse insertion system calibration 6
8 verification report and mark 7
Appendix A (Normative Appendix) Measurement Techniques for Determining Pulse Intervals 8
Foreword
GB/T 17286 "Liquid Hydrocarbon Dynamic Measurement Volumetric Flowmeter Verification System" includes the following four parts.
--- Part 1. General principles;
--- Part 2. Volume tube;
--- Part 3. Pulse insertion technology;
--- Part 4. Volume tube operator guide.
This part is the third part of GB/T 17286.
This part is equivalent to the ISO 7278-3.1998 "liquid hydrocarbon dynamic measurement volumetric flowmeter verification system Part 3. Pulse
Insert Technology.
This part replaces GB/T 17286.3-1998 "Determination of liquid hydrocarbon dynamic measurement volumetric flowmeter verification system Part 3. Pulse
Insert Technology.
This part is revised according to GB/T 1.1-2000 "Standardization Work Guide Part 1. Standard Structure and Writing Rules" and
GB/T 20000.2-2009 "Standardization Work Guide Part 2. Adopting International Standards" made some editorial changes.
The main differences between this part and the technical content of GB/T 17286.3-1998 are as follows.
--- In GB/T 17286.3-1998, the definition of repetitiveness is. "Under the prescribed conditions of use, repeat the same application
Incentives, the ability of the measuring instrument to give a very similar response." In this section, this definition is changed to read. "Under the same measurement conditions,
Repeated measurement of the same measured capability, the ability of the measuring instrument to provide close indications." This redefinition makes the concept clearer and more accurate
Indeed, normative.
--- In GB/T 17286.3-1998, the definition of the detection switch signal is. "A switch letter to start or stop the display device
Number or voltage change signal. In this section this definition is changed to read. "A switch signal that activates or stops the pointing device or
Signal of voltage change".
--- Suggestions in this section, in order to reduce the internal rotation nonlinearity of the flowmeter, you can use only one pulse per revolution.
Flow meter. It may not be common in practical applications, but this recommendation only considers reducing the internal rotational nonlinearity of the flowmeter.
--- In GB/T 17286.3-1998, the definition of phase-locked loop pulse insertion method n" is. "According to multi-phase output collection frequency increase
The high number of pulses" is defined in this section as "the number of high frequency pulses generated by the collected voltage controlled oscillator (VCO)".
--- In 5.1.5 of GB/T 17286.3-1998. "In each case the same volume tube detection switch should be used
The leading edge of the signal. In this section it is modified to read. "The same signal leading or trailing edge should be used in each case."
--- In Chapter 2, change ISO 6551.1982 to GB/T 17746-1999 (idtISO 6551.1982).
Appendix A of this section is a normative appendix.
This part was proposed by China National Petroleum Corporation.
This part is under the jurisdiction of the Oil and Gas Measurement Subcommittee of the Oil Industry Measurement and Analysis Method Professional Standardization Technical Committee.
This section is responsible for drafting the unit. China National Petroleum Corporation Measurement and Testing Institute.
The main drafters of this section. Gao Jun, Liu Xiaoguang, Liu Xianying.
The previous versions of the standards replaced by this section are.
---GB/T 17286.3-1998.
Introduction
When using a volumetric tube to calibrate a flow meter with a pulse output, there is a limit to the minimum number of pulses to be collected during the calibration.
The number of pulses that can be generated during a test run is sometimes limited to well below 10,000 pulses. Therefore, in many applications,
No method of increasing the resolution of the flowmeter is sought.
One way to solve this problem is to process the pulse signal from the flow meter to increase the resolution of the flow meter. This kind of improved flow meter
The technique of resolution is called pulse insertion technology.
This section applies primarily to volumetric tubes, but does not in any way limit the different pulse insertion techniques in this or other fields.
Further development.
National standard GB/T 17286.3-1998 "Hydraulic hydrocarbon dynamic measurement volumetric flowmeter verification system - Part 3
Since its implementation on October 1,.1998, Technology has played a positive role in promoting the development of China's crude oil dynamic measurement technology.
In the past 10 years, the dynamic measurement technology of liquid hydrocarbons at home and abroad has undergone new changes. In order to adapt to the specific national conditions of China, in order to promote liquidity
The development of hydrocarbon metering technology and its integration with international practices, it is necessary to amend GB/T 17286.3-1998.
Dynamic measurement of liquid hydrocarbons
Volumetric flowmeter verification system
Part 3. Pulse insertion technique
1 Scope
This part of GB/T 17286 gives a system for the verification of turbine or volumetric flowmeters in conventional volumetric tubes or small volumetric tubes.
In order to improve the resolution of the flowmeter, the application methods and conditions to be followed when applying the pulse insertion technique. When characterizing other forms of flowmeters,
Also refer to the methods provided in this section.
This section describes the three most commonly used pulse insertion techniques and their conditions of use. It also describes the operation of the test pulse insertion system.
The equipment used in the state and the calibration method; some methods for measuring the irregularity of the pulse interval of the flowmeter are also described (see Appendix A).
2 Normative references
The provisions in the following documents become the provisions of this part by reference in this part of GB/T 17286. Quotations with dated
And all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved in accordance with this section.
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 17746-1999 Dynamic measurement of petroleum liquids and gases - Fibre and/or electronic pulse data cable transmission fidelity and
Reliance (idtISO 6551.1982)
3 Terms and definitions
The following terms and definitions apply to this part of GB/T 17286.
3.1
Clock clock
A device that produces a stable frequency whose period is used as a reference standard for measuring time.
3.2
Detection switch signal detectorsignal
A signal that initiates or stops a switching signal or voltage change indicative of a device.
3.3
Internal rotation linearity intra-rotationallinearity
A rotary flow meter produces a pulse at a constant flow rate with a quantitative measure of the uniformity of the interval between pulses. Linearity general table
Shows the standard deviation of the pulse interval from the average pulse interval. Such measurements include periodic and aperiodic measurements caused by flow meter mechanisms
result.
The internal rotational linearity is a measure of the degree of uniformity that is caused by the rotor of the flow meter and is repeated in an intermittent or periodic manner.
3.4
Leading edge and trailing edge leading/laggingedge
Used to trigger or control the rise and fall voltage of the counter pulse.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17286.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 17286.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17286.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17286.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17286.3-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17286.3-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|