|
US$354.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17126.1-2009: Agricultural tractors and machinery -- Power take-off drive shafts and power input connection -- Part 1: General manufacturing and safety requirements
Status: Valid GB/T 17126.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17126.1-2009 | English | 354 |
Add to Cart
|
3 days [Need to translate]
|
Agricultural tractors and machinery -- Power take-off drive shafts and power input connection -- Part 1: General manufacturing and safety requirements
| Valid |
GB/T 17126.1-2009
|
| GB/T 17126-1997 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Agricultural tractors and machinery--Power take-off drive shafts and position of power-input connection
| Obsolete |
GB/T 17126-1997
|
PDF similar to GB/T 17126.1-2009
Basic data | Standard ID | GB/T 17126.1-2009 (GB/T17126.1-2009) | | Description (Translated English) | Agricultural tractors and machinery -- Power take-off drive shafts and power input connection -- Part 1: General manufacturing and safety requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B90 | | Classification of International Standard | 65.060.01 | | Word Count Estimation | 18,144 | | Date of Issue | 2009-11-30 | | Date of Implementation | 2010-04-01 | | Older Standard (superseded by this standard) | GB/T 17126-1997 | | Quoted Standard | GB/T 1592.1; GB/T 1592.3; GB/T 5263; GB 10395.1; GB 10396 | | Adopted Standard | ISO 5673-1-2005, IDT | | Regulation (derived from) | National Standard Approval Announcement 2009 No.14 (Total No.154) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the agricultural tractor or self-propelled machinery PTO drive shafts and drive its power input connection. This section only applies to PTO shaft and the bearing and shaft through at least two mechanical connection shield. | GB/T 17126.1-2009: Agricultural tractors and machinery -- Power take-off drive shafts and power input connection -- Part 1: General manufacturing and safety requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Agricultural tractors and machinery Power take-off drive shafts and power input connection Part 1. General manufacturing and safety requirements
ICS 65.060.01
B90
National Standards of People's Republic of China
GB/T 17126.1-2009/ISO 5673-1.2005
Partially replace GB/T 17126-1997
Agricultural tractors and machinery
PTO shaft and
Power input connection
Part 1. General manufacturing and safety requirements
(ISO 5673-1.2005, IDT)
Posted 2009-11-30 2010-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 17126 "Agricultural tractors and machinery - Power shafts and power - input connection" is divided into.
--- Part 1. General manufacturing and safety requirements;
--- Part 2. PTO shaft using a standard, all types of coupling device output power train and power input connection
Device location and clearance range.
This section is GB/T Part of 117,126.
This section identical with ISO 5673-1.2005 "Agricultural tractors and machinery PTO shaft and power input connection means
Set Part 1. General manufacturing and safety requirements "(in English).
This section is equivalent translation ISO 5673-1.2005.
For ease of use, this section made the following editorial changes.
--- "This International Standard" be replaced by "this section";
--- Remove ISO 5673-1.2005 Foreword;
--- ISO 5673-1.2005 and other international standards referenced with have been adopted in place for our standards.
This section is amended to GB/T 17126-1997, the main technical content changes are as follows.
--- According to the new international standard will be divided into two parts;
--- Added "two PTO shaft", "two power input connection means" terms and definitions;
--- Increasing manufacturing and safety requirements;
--- Increased use of information requirements.
Date of implementation of this section instead of GB/T 17126-1997 part of.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee on Agriculture machinery centralized.
This section drafted by. Chinese Academy of Agricultural Mechanization Sciences, Luoyang Tractor Research Institute, the National Quality Supervision and Inspection Center of farm machinery.
The main drafters of this section. Zhang Xian Sheng, Chen Ge, Shang Rope, Zhang Qi, Lv Shusheng.
This part of the standard replaces the previous editions are.
--- GB/T 17126-1997.
GB/T 17126.1-2009/ISO 5673-1.2005
Agricultural tractors and machinery
PTO shaft and
Power input connection
Part 1. General manufacturing and safety requirements
1 Scope
GB/T 17126 provisions of this part of the tractor or self-propelled agricultural machinery PTO shaft and power transmission equipment
The connecting device.
This section establishes the given manufacturing and safety requirements, the determination of power output shafts static and dynamic torsional strength.
This section applies only to PTO shaft and the bearing and the shaft by at least two mechanical connection shield.
This section does not apply to power for protection by setting the position of the output shafts, does not apply to the restriction device and turn retrograde
Torque limiter mechanical properties evaluation.
This section does not consider environmental factors.
2 Normative references
The following documents contain provisions which, through reference GB/T 17126 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1592.1 agricultural tractor rear PTO 1, 2 and 3 - Part 1. General requirements, safety requirements, protective cover
Dimensions and clearance zone (GB/T 1592.1-2008, ISO 500-1.2004, IDT)
GB/T 1592.3 agricultural tractor rear PTO shaft 1,2 and 3 - Part 3. PTO dimensions and spline dimensions,
PTO shaft position (GB/T 1592.3-2008, ISO 500-3.2004, IDT)
GB/T 5263 Tractors and machinery for agriculture and forestry PTO shaft guard Strength and wear tests and acceptance
(GB/T 5263-2009, ISO 5674.2004, IDT)
GB 10395.1 agriculture and forestry machinery - Safety - Part 1. General (GB 10395.1-2009, ISO 4254-1.2008, MOD)
GB 10396 agricultural and forestry tractors and machinery, lawn and garden equipment - Safety signs and hazard pictorials - General principles (GB 10396-
2006, ISO 11684.1995, MOD)
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1
By the two universal joints, and a telescoping tube assembly by at least two bearings and shaft mechanically connected shield consisting of assembly, which
For inter-tractor or self-propelled mechanical power transmission output shaft rotational power to the equipment and/or machinery parts.
3.1.1
Connecting a tractor or self-propelled machinery and equipment PTO power input connecting means may be off-type PTO Drive
axis. See Figure 1.
GB/T 17126.1-2009/ISO 5673-1.2005
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17126.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 17126.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17126.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17126.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17126.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17126.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|