|
US$354.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1687.3-2016: Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 3: Compression flexo meter (constant-strain type)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1687.3-2016 | English | 354 |
Add to Cart
|
3 days [Need to translate]
|
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 3: Compression flexo meter (constant-strain type)
| Valid |
GB/T 1687.3-2016
|
PDF similar to GB/T 1687.3-2016
Basic data | Standard ID | GB/T 1687.3-2016 (GB/T1687.3-2016) | | Description (Translated English) | Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 3: Compression flexo meter (constant-strain type) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G40 | | Classification of International Standard | 83.060 | | Word Count Estimation | 18,175 | | Date of Issue | 2016-12-13 | | Date of Implementation | 2017-07-01 | | Older Standard (superseded by this standard) | GB/T 1687-1993 | | Regulation (derived from) | National Standard Announcement No.36 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 1687.3-2016: Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 3: Compression flexo meter (constant-strain type)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - Part 3. Compression flexometer (constant-strain type)
ICS 83.060
G40
National Standards of People's Republic of China
Replacing GB/T 1687-1993
Vulcanized rubber in the flexion test
Determination of fatigue resistance
Part 3. Compression test (constant strain type)
Rubber, vulcanized-Determinationoftemperatureriseand
Part 3. Compressionflexometer (constant-straintype)
(ISO 4666-3..2010, IDT)
2016-12-13 release.2017-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Foreword
GB/T 1687 "vulcanized rubber in the flexion test temperature rise and fatigue resistance of the determination" is divided into the following four parts.
- Part 1. Fundamentals;
- Part 2. Rotation flex test;
- Part 3. Compression test (constant strain);
Part 4. Constant stress flexion test.
This part is part 3 of GB/T 1687.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
Part 1. GB/T 1687-1993 "Determination of temperature rise and fatigue resistance of vulcanized rubber in flexion test - Part 2. Determination of temperature rise and fatigue resistance
Shrinkage test ", compared with GB/T 1687-1993 main technical changes are as follows.
--- updated normative reference documents (see Chapter 2);
- a detailed description of the flexure testing machine has been added (see 5.1);
--- Added calibration requirements (see Chapter 6);
- increased pre-test preparation (see 9.1);
- increased the temperature of the thermocouple temperature of the press plate (see 9.2.1);
--- Increased creep test method (see 9.2.4);
--- Increased creep calculation method (see 10.2);
--- Added Appendix A, Appendix B and Appendix C.
--- to delete the.1993 edition of Chapter 9 flexion testing machine work check;
--- Removal of the.1993 edition of Appendix A vulcanized rubber compression test machine calibration.
This part uses the translation method equivalent to ISO 4666-3..2010 "vulcanized rubber in the flexion test temperature rise and fatigue resistance of the determination
Part 3. Compression test (constant strain type) ".
In this part of the normative reference to the international documents have a consistent correspondence between the following documents.
GB/T 1687.1-2016 Determination of temperature rise and fatigue resistance of vulcanized rubber in flexion tests - Part 1. Basic
Principle (ISO 4666-1..2010, IDT);
Rubber - Physical test methods - General procedure for the preparation and adjustment of specimens (ISO 23529..2004, IDT); GB/T 2941-2006.
Determination of hardness of vulcanized rubber or thermoplastic rubber (10 to 100 IRHD) (ISO 48..1994,
IDT).
This section is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35) centralized.
This part of the drafting unit. Yiwei Yi Rubber Research Institute Co., Ltd., Guizhou Tire Co., Ltd., Fengshen Tire Co., Ltd.,
Beijing Rubber Industry Research and Design Institute, Xuzhou Xu Wheel Rubber Co., Ltd., Guangzhou South China Rubber Tire Co., Ltd., Jiangsu Pearl Instrument Technology
Co., Ltd., Jiangsu Xinwei Wei Test Machinery Co., Ltd., high-speed rail detection equipment Limited.
This part of the main drafters. Liu Aiqin, Lu Bin, Feng Ping, Ren Shaowen, Ma Tiancheng, Xie Junfang, Li Jing, Wei Bangfeng, Liu Lian,
Chen Yutao, Bao Dafei, Shen Kehui, Chen Ruiyi, Chen Yunzhong.
This part of the previous version of the standard to replace the release of the situation.
GB 1687-1983, GB/T 1687-1993.
Introduction
In the case of compression and flexing, the temperature rise of the rubber due to internal heat generation, this part provides a test to determine the temperature rise
method.
The damage to the specimen can lead to fatigue failure when the heat is particularly severe and the temperature continues to rise. This section also applies to
Determination of the fatigue life of such rubber.
This test is carried out under a selected static prestress or compressive load to apply a constant maximum amplitude to the specimen.
State strain.
Vulcanized rubber in the flexion test
Determination of fatigue resistance
Part 3. Compression test (constant strain type)
WARNING. Personnel using this section should have practical experience in formal laboratory work. This section does not address all possible security issues,
It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the conditions set forth in the relevant national regulations.
Note. Some of the operations involved in this section may be used to generate some substances or produce waste and have an adverse effect on the local environment.
Develop appropriate documents for the disposal of these substances after use.
1 Scope
This part of GB/T 1687 specifies the determination of temperature rise and fatigue resistance of vulcanized rubber in constant strain amplitude compression test
law. The flexure testing machine described in this section is a Goodrich flexor tester and other equipment equivalent to its performance.
This part applies to the prediction of rubber products (such as tires, rubber bearings, rubber bearings, V-belt and rope wheel insert ring, etc.) in the dynamic
The durability of the scratch. However, due to the large differences in the conditions of use of rubber products, it can not be assumed that the use of the characteristics described in this section of the acceleration
Fatigue test has a simple correlation.
This part does not apply to vulcanized rubber with a hardness above 85IRHD.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 25269-2010 Rubber Test Equipment Calibration Guide (ISO 18899..2004, IDT)
ISO 48 vulcanized rubber or thermoplastic rubber hardness determination (10IRHD ~ 100IRHD) [Rubber, vulcanizedorther-
moplastic-Determinationofhardness (hardnessbetween10IRHDand100IRHD)]
ISO 4666-1 vulcanized rubber - Determination of temperature rise and fatigue resistance in flexion tests - Part 1. Basic principles (Rubber,
vulcanized-Determinationoftemperatureriseandresistancetofatigueinflexometertesting-Part 1.
Basicprinciples
ISO 23529 Rubber Physical Test Method Sample Preparation and Adjustment General Procedure (Rubber-Generalproceduresforpre-
paringandconditioningtestpiecesforphysicaltestmethods)
3 terms and definitions
ISO 4666-1 Definitions of terms and definitions apply to this document.
4 test principle
The specified compression load is applied to the specimen by means of a high inertia balance lever while the sample is subjected to a high frequency with a constant amplitude
Cycle compression, with a thermocouple (the thermocouple can be measured in the process of bending the sample heat) to measure the bottom of the sample temperature rise, record production
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1687.3-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 1687.3-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1687.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1687.3-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|