HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 16588-2009 English PDF

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16588-2009: Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions
Status: Valid

GB/T 16588: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 16588-2009English234 Add to Cart 3 days [Need to translate] Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions Valid GB/T 16588-2009
GB/T 16588-1996English439 Add to Cart 4 days [Need to translate] V-ribbed belts and pulleys for industrial applications--Dimensions (PH PJ PK PL and PM profiles) Obsolete GB/T 16588-1996

PDF similar to GB/T 16588-2009


Standard similar to GB/T 16588-2009

GB/T 13552   GB/T 18426   GB/T 14905   GB/T 28267.3   GB/T 10541   GB/T 16591   

Basic data

Standard ID GB/T 16588-2009 (GB/T16588-2009)
Description (Translated English) Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G42
Classification of International Standard 21.220
Word Count Estimation 12,121
Date of Issue 2009-04-24
Date of Implementation 2009-12-01
Older Standard (superseded by this standard) GB/T 16588-1996
Quoted Standard GB/T 3505; GB/T 11357
Adopted Standard ISO 9982-1998, IDT
Regulation (derived from) National Standard Approval Announcement 2009 No.6 (Total No.146)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the PH, PJ, PK, PL, PM Ribbed endless industrial and ribbed tank Wheel main dimensions. This standard applies to PH, PJ, PK, PL, PM Ribbed endless industrial and ribbed round. PK Section for automotive auxiliary drive them from the GB 13552 special provisions.

GB/T 16588-2009: Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles. Dimensions ICS 21.220 G42 National Standards of People's Republic of China GB/T 16588-2009/ISO 9982.1998 Replacing GB/T 16588-1996 Belt drives and industrial ribbed belt pulley PH, PJ, PK, PL and PM profiles. Dimensions (ISO 9982.1998, IDT) Posted 2009-04-24 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to using ISO 9982.1998 "industrial belt drive --- ribbed belt and pulley --- PH, PJ, PK, PL and PM Type. Size "(in English). This standard replaces GB/T 16588-1996 "industrial ribbed belt and pulley size (PH, PJ, PK, PL and PM type)." This standard is equivalent translation ISO 9982.1998. For ease of use, this standard made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) use a decimal point instead of a decimal comma ",". ","; c) Remove the preface to international standards. This standard and GB/T 16588-1996 compared to the main changes are as follows. --- PH, PJ, PK-type wheel slot size 2N (maximum) respectively, by 0.69mm, 0.81mm, 1.68mm replace the original standards 1.08mm, 1.22mm, 2.06mm (1996 Version 4.1; 3.1 edition); --- Increased inspection pulley sectional dimension with the ball (or column) at the outer edge of the pulley diameter K limit deviation regulations (see 3.3.5); --- Deviations in Table V-ribbed belt effective length, the effective length of the first profile 375mm < Le≤750mm, to two tranches 200mm < Le≤500mm and 500mm < Le≤750mm, an additional type of PH ribbed belt effective length limit bias Poor provisions (1996 Version 3.1.2; 4.2.4 edition). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee and the friction belt drive with pulleys Technical Committee (SAC/TC428/SC3) centralized. This standard was drafted. Ningbo Fulong Synchronous Belt Co., Ltd. Health Rui Ma On Shan, Wuxi Hui Rubber Technology Co., The company, Hangzhou Ken Laite Transmission Industry Co., Ltd., Qingdao City Product Quality Supervision and Inspection. The main drafters of this standard. Lu Hongfen, Panhai Rui Zhu six students, Zhu Shusheng, Wang Jinfang, Wugui Qing. This standard replaces the standards previously issued as follows. --- GB/T 16588-1996. GB/T 16588-2009/ISO 9982.1998 Belt drives and industrial ribbed belt pulley PH, PJ, PK, PL and PM profiles. Dimensions

1 Scope

This standard specifies the PH, PJ, PK, PL, PM endless industrial ribbed belt and ribbed pulley wheel groove main dimensions. This standard applies to PH, PJ, PK, PL, PM endless industrial ribbed belt and ribbed pulley. PK-type ribbed belts for automotive auxiliary drive by GB 13552 its special provisions.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3505 Geometrical product specification the term structure of the surface contours of the surface structure of the law, definitions and parameters (GB/T 3505-2000, eqvISO 4287.1997) GB/T 11357 pulley material, surface roughness and the balance (GB/T 11357-2008, ISO 254.1998, MOD)

3 pulleys

3.1 slot dimensions and limit deviations PH, PJ, PK, PL and PM-type V-ribbed belt applies cam groove dimensions shown in Figure 1, Figure 2 and Table 1 below. 1 --- wheel tank top groove contour line can be located in any part of the region, both ends of the contour of the wheel should have a fillet tangent to the groove side (minimum 30 °); Note. N value is shown in Figure 2. Figure 1 cross-section groove GB/T 16588-2009/ISO 9982.1998

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16588-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16588-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16588-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16588-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16588-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16588-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.