|
US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16591-2013: Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification
Status: Valid GB/T 16591: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16591-2013 | English | 314 |
Add to Cart
|
3 days [Need to translate]
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification
| Valid |
GB/T 16591-2013
|
| GB/T 16591-1996 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Rubber hose and hose assemblies for transferring anhydrous ammonia
| Obsolete |
GB/T 16591-1996
|
PDF similar to GB/T 16591-2013
Basic data | Standard ID | GB/T 16591-2013 (GB/T16591-2013) | | Description (Translated English) | Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G42 | | Classification of International Standard | 71.120.99; 83.140.40 | | Word Count Estimation | 16,159 | | Older Standard (superseded by this standard) | GB/T 16591-1996 | | Quoted Standard | GB/T 5564-2006; GB/T 24134-2009; ISO 37; ISO 188-2007; ISO 1307; ISO 1402; ISO 4671; ISO 8033; ISO 8330 | | Adopted Standard | ISO 5771-2008, IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 10 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies at -40��C ~ 55��C ambient temperature conveying liquid or gaseous form of ammonia used in the technical requirements of the rubber hose. It does not include fittings norms, only the hose and hose assembly performance. | GB/T 16591-2013: Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
ICS 71.120.99; 83.140.40
G42
National Standards of People's Republic of China
Replacing GB/T 16591-1996
Transferring anhydrous ammonia hoses and rubber hose
Assembly specification
Specification
(ISO 5771.2008, IDT)
Issued on. 2013-07-19
2013-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 16591-1996 "transferring anhydrous ammonia Rubber hoses and hose assemblies", and GB/T 16591-1996 phase
Technology than the main changes are as follows.
--- Normative references have changed (see Chapter 2, Chapter 2, 1996 edition);
--- Increasing the term (see Chapter 3);
--- Increase the measured concentricity (see 6.3);
--- Modify the inner diameter hose specifications and tolerances (see Table 2, 1996 edition Table 4);
--- Improving the liner bond strength and the outer coating adhesion strength (see table 4, 1996 edition of Chapter 2);
--- Modify the inner liner and an outer cover layer of rubber compound physical properties (see 71, 1996 edition of 4.1,4.3.);
--- Amend Table 2 (see Chapter 7, Chapter 4, 1996 edition);
--- Deleted Table 3 (1996 Version 4.4);
--- Increase the hose assembly and test delivery using the annual testing requirements (see Chapter 8);
--- Increase the test frequency (see Chapter 9);
--- Increased packaging and storage requirements (see Chapter 11);
--- Increasing the test certificate (see Chapter 12);
--- Added Appendix A, Appendix B, Appendix C (see Appendix A, Appendix B, Appendix C);
--- Modify the hose cutting length tolerance (see Appendix A, 1996 edition of Table 5).
This standard uses the translation method identical with ISO 5771.2008 "for transferring anhydrous ammonia Rubber hoses and hose assemblies - Specification."
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 528-2009 vulcanized rubber or thermoplastic rubber tensile stress strain properties (ISO 37.2005, IDT)
--- GB/T 3512-2001 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test (eqv ISO 188.1998)
--- GB/T 5563-2006 Rubber and plastic hoses and hose assemblies - Hydrostatic testing (ISO 1402.1994, IDT)
--- GB/T 7528-2011 Rubber and plastic hoses and hose assemblies terminology (ISO 8330.2007, IDT)
--- GB/T 9573-2003 Rubber and plastics hose and hose assemblies size measurement method (ISO 4671.1999, IDT)
--- GB/T 9575-2003 industrial and general rubber plastic hose diameters and tolerances, and tolerances on length (ISO 1307.1992, IDT)
--- GB/T 14905-2009 Rubber and plastics hoses - Determination of adhesion between layers (ISO 8033.2006, IDT)
This standard made the following editorial changes.
--- Chapter 2 references ISO 7326, because in the text reference is ISO 7326.2006 method, should be dated references, so
Be amended to date references, and converted to the corresponding country standard GB/T 24134-2009;
--- Appendix of tables and order of appearance will be renumbered.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Rubber and rubber products hose Standardization Technical Committee Technical Committee (SAC/TC35/SC1) centralized.
This standard is drafted by. Pingdingshan mine beneficial Hose Products Co., Ltd., Shenyang Rubber Research and Design Institute.
The main drafters of this standard. white Peng Liang west positive, Wang Shuli, Yue Qi, Hu Zhang right.
This standard was first published in 1996, this is the first revision.
Transferring anhydrous ammonia hoses and rubber hose
Assembly specification
1 Scope
This standard specifies the technical requirements for transporting liquid or gaseous form of ammonia at -40 ℃ ~ 55 ℃ ambient temperature with a rubber hose.
It does not include pipe fitting specifications, performance is limited to the use of hoses and hose assemblies.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5564-2006 Rubber and plastic hoses low temperature flexibility tests (ISO 4672.1997, IDT)
GB/T 24134-2009 Evaluation of ozone resistance properties of rubber and plastic hoses under static conditions (ISO 7326.2006, IDT)
ISO 37 Rubber, vulcanized or thermoplastic rubber --- Determination of tensile stress-strain properties (Rubber, vulcanizedorthermo-
plastic-Determinationoftensilestress-strainproperties)
ISO 188.2007 vulcanized rubber or thermoplastic rubber Accelerated aging and heat resistance test (Rubber, vulcanizedorthermo-
plastic-Acceleratedageingandheatresistancetests)
ISO 1307 Rubber and plastics hoses --- hose specifications, the minimum and maximum internal diameter of the hose and cut into segments of tolerance (Rubberand
plasticshoses-Hosesizes, minimumandmaximuminsidediameters, andtolerancesoncut-to-length
hoses)
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (Rubberandplasticshosesandhoseas-
semblies-Hydrostatictesting)
ISO 4671 Rubber and plastics hoses and hose assemblies size measurement method (Rubberandplasticshosesandhoseas-
semblies-Methodsofmeasurementofdimensions)
Determination of ISO 8033 Rubber and plastics hoses adhesion strength between layers (Rubberandplasticshose-Determination
ofadhesionbetweencomponents)
ISO 8330 Rubber and plastics hoses and hose assemblies term (Rubberandplasticshosesandhoseassemblies-
Vocabulary)
3 Terms and Definitions
The terms and definitions given in ISO 8330 apply to this document.
4 rated pressure
Pressure rating shall comply with the requirements in Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16591-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 16591-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16591-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16591-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16591-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16591-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|