|
US$699.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16462.3-2017: Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical work-holding spindles
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16462.3-2017 | English | 699 |
Add to Cart
|
5 days [Need to translate]
|
Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical work-holding spindles
| Valid |
GB/T 16462.3-2017
|
PDF similar to GB/T 16462.3-2017
Basic data | Standard ID | GB/T 16462.3-2017 (GB/T16462.3-2017) | | Description (Translated English) | Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical work-holding spindles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J53 | | Classification of International Standard | 25.040.20 | | Word Count Estimation | 35,372 | | Date of Issue | 2017-07-12 | | Date of Implementation | 2018-02-01 | | Quoted Standard | GB/T 17421.1-1998; ISO 230-7-2006 | | Adopted Standard | ISO 13041-3-2009, MOD | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the geometrical accuracy requirements and methods and their corresponding tolerances for general purpose inverted CNC vertical lathes and inverted vertical turning centers. This standard explains the different concepts, different configurations and general characteristics of inverted CNC vertical lathes and inverted vertical turning centers, and gives the terms and definitions of the control axes (see Figures 1, 2, 3 and 4). This standard applies to the accuracy of machine tools. This standard does not apply to machine tool inspection (such as vibration of the machine, abnormal noise, crawling of moving parts and other tests) and machine tool characteristics (such as speed, feed), because these tests are usually carried out before the accuracy test. | GB/T 16462.3-2017: Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical work-holding spindles
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test conditions for numerically controlled turning machines and turning centers. Part 3. Geometric tests for machines with inverted vertical work-holding spindles
ICS 25.040.20
J53
National Standards of People's Republic of China
CNC lathe and turning center inspection conditions
Part 3. Geometrical precision inspection of inverted vertical machine tools
turningcentres-Part 3.Geometrictestsformachineswithinverted
(ISO 13041-3.2009, MOD)
2017-07-12 Posted
2018-02-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General Requirements 2
4.1 Measurement unit 2
4.2 According to the standard 2
4.3 machine leveling 2
4.4 test sequence 2
4.5 test items 2
4.6 test tools 2
4.7 Sketch 3
4.8 Software Compensation 3
4.9 Minimum tolerance 3
4.10 machine tool structure, terms and axis name 3
4.11 Turret 5
4.12 machine tool size range 5
5 geometric accuracy test 6
5.1 workpiece spindle 6
5.2 workpiece spindle and the relationship between the axis of motion 8
5.3 Linear axis movement of the angle deviation 11
5.4 Tool Holder and Power Tool 17
5.5 rotary workpiece spindle box 25
Appendix A (Informative) Rotary axis accuracy test 26
Appendix B (informative) three-point measurement method 30
References 32
Foreword
GB/T 16462 "CNC lathe and turning center inspection conditions" is divided into eight parts.
--- Part 1. Horizontal machine geometry accuracy test;
--- Part 2. Vertical machine geometry accuracy test;
--- Part 3. Inverted vertical machine geometry accuracy test;
--- Part 4. Linear and rotary axis positioning accuracy and repeat positioning accuracy test;
--- Part 5. Feed, speed and interpolation accuracy test;
--- Part 6. Precision test precision test pieces;
--- Part 7. Evaluation of the contour characteristics in the coordinate plane;
--- Part 8. Assessment of thermal deformation.
This section GB/T 16462 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the redrafted law revision using ISO 13041-3.2009 "CNC lathe and turning center inspection conditions Part 3. Down
Vertical machine tool geometric accuracy test. "
This part of ISO 13041-3.2009 technical differences and the reasons are as follows.
--- Chapter 4 title "brief description" to "general requirements", after the change in line with national conditions and with the current standards of similar CNC machine tools uniform;
--- In the accuracy of the test table to delete the "measured deviation" column, because "measured deviation" is usually in the machine "certificate of conformity or accuracy
Single "appears, there is no need to appear in the standard, after the change in line with national conditions and with the current standards of similar CNC machine tools unified;
--- Chapter 6 of the International Standard will be replaced by this section Appendix A (informative), because the sixth chapter of the International Standard test items immature,
No test indicators, so this section will be Chapter 6 as a reference test items in this part of the Appendix A, after the change
In line with national conditions and with the current standards of similar CNC machine tools uniform;
--- International Standard Appendix A to Appendix B of this section, because the International Standard Chapter 6 to Appendix A of this section, so the International
Standard appendix A to appendix B of this section.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee metal cutting machine (SAC/TC22) centralized.
This part of the drafting unit. Beijing Beiyi Machine Tool Co., Ltd., Anyang Xinsheng Machine Tool Co., Ltd., Shenyang Machine Tool (Group) Co., Ltd.
Responsible company.
The main drafters of this section. Hu Ruilin, Liu Yuling, Wei and Wei, Lu Anxiang, Wang Xinghai.
CNC lathe and turning center inspection conditions
Part 3. Geometrical precision inspection of inverted vertical machine tools
1 Scope
GB/T 16462 of this part of GB/T 17421.1 and ISO 230-7 provides for general-purpose inverted CNC vertical lathe and pour
Geometrical inspection requirements and methods for vertical turning centers and their corresponding tolerances.
This section explains different concepts, different configurations and common features of inverted CNC vertical lathes and inverted vertical turning centers, and gives
Control axis terms and definitions (see Figure 1, Figure 2, Figure 3 and Figure 4).
This section applies to the accuracy of machine tools.
This section does not apply to the operation of the machine inspection (such as machine vibration, abnormal noise, crawling and other moving parts test) and machine tools
(Such as speed, feed rate), because these tests are usually carried out before the accuracy test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 17421.1-1998 General rules of machine tools testing - Part 1. Geometrical accuracy of machine tools under no load or finishing conditions (eqv
ISO 230-1.1996)
ISO 230-7.2006 General rules of machine tools testing - Part 7 of the geometric axis of rotation of the test (Testcodeformachine
tools-Part 7.Geometricaccuracyofaxesofrotation)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Turning machine turningmachine
The main motion is the machine tool that rotates the workpiece relative to the fixed tool.
3.2
Manual control manualcontrol
The machine's mode of operation for each movement is independent and operator controlled.
3.3
Numerical control numericalcontrol; NC
Computer numerical control computerizednumericalcontrol; CNC
With numerical data control device, in the running process, the constant introduction of numerical data, so that a production process to achieve automatic control.
[GB/T 8129-2015]
3.4
Manual control lathe manualycontroledturningmachine
The machining steps of the machine are controlled or started by an operator without the use of a CNC lathe.
|