|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15305.2-2008: Coated abrasives -- Abrasive rolls
Status: Valid GB/T 15305.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15305.2-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Coated abrasives -- Abrasive rolls
| Valid |
GB/T 15305.2-2008
|
| GB/T 15305.2-1994 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Coated abrasives. Abrasive rolls--Dimensions and tolerance
| Obsolete |
GB/T 15305.2-1994
|
PDF similar to GB/T 15305.2-2008
Basic data | Standard ID | GB/T 15305.2-2008 (GB/T15305.2-2008) | | Description (Translated English) | Coated abrasives -- Abrasive rolls | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J43 | | Classification of International Standard | 25.100.70 | | Word Count Estimation | 6,626 | | Date of Issue | 2008-06-03 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 15305.2-1994 | | Quoted Standard | ISO 554: 1976 | | Adopted Standard | ISO 3366-1999, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.9 (Total No.122) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the sand volume models, dimensions and tolerances and markings. | GB/T 15305.2-2008: Coated abrasives -- Abrasive rolls---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coated abrasives. Abrasive rolls
ICS 25.100.70
J43
National Standards of People's Republic of China
Replacing GB/T 15305.2-1994
Coated Abrasives sand volumes
(ISO 3366.1999, MOD)
Posted 2008-06-03
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 10305 in this part of the modifications adopted ISO 3366.1999 (E) "Coated Abrasives sand volumes" (in English). And ISO 3366.
1999 (E) compared to the technical part of the modifications are as follows.
--- 3.1 "models and sizes" to "type, dimensions and tolerances";
--- Table 1. Table title "Dimensions" was changed to "dimensions and tolerances";
--- 230mm of sand volumes increased width dimension and tolerance of ± 2mm;
--- Increased by 690mm, 920mm, 1370mm width roll sand the dimensions and tolerances ± 3mm;
--- Chapter 5 in the "flag content producers should be custom," to "content should be marked on the sand volumes. a) size; b) name of the manufacturer
Or registered trademarks. "
For ease of use, this section also made the following editorial changes.
--- The "this International Standard" be replaced by "this section";
--- Delete international standards foreword.
This Part replaces GB/T 15305.2-1994 in "Coated Abrasives sandpaper roll dimensions and tolerances" requirement. versus
GB/T 15305.2-1994 compared to the main changes are as follows.
--- Increasing the foreword, product type, test conditions, marks and logos;
--- Modify the sand volume product width and length dimensions, and symbols representing the width, length.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee Abrasives (SAC/TC139) centralized.
This section is drafted. pigeons Abrasives Co., Ltd.
The main drafters of this section. Hong Ling, Zhao Xinli.
This part of the standard replaces the previous editions are.
--- GB/T 15305.2-1994.
Coated Abrasives sand volumes
1 Scope
GB/T 15305 provisions of this part of the sand volume models, dimensions and tolerances and their markers.
2 Normative references
The following documents contain provisions which, through reference GB/T 15305 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
ISO 554. 1976 defines and/or technical standard atmospheric conditions during test
3 Requirements
3.1 References, dimensions and tolerances
Figure 1, Figure 2 and Table 1.
Figure 1 A chucks sand volumes Figure 2 B-type chuck mounted volume is not mounted sand
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15305.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 15305.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15305.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15305.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15305.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15305.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|