|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14652.1-2009: Small craft -- Fire-resistant fuel hoses
Status: Valid GB/T 14652.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14652.1-2009 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Small craft -- Fire-resistant fuel hoses
| Valid |
GB/T 14652.1-2009
|
| GB/T 14652.1-2001 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Small craft -- Fire-resistant fuel hoses
| Obsolete |
GB/T 14652.1-2001
|
| GB/T 14652-1993 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Small craft. Fuel hoses
| Obsolete |
GB/T 14652-1993
|
PDF similar to GB/T 14652.1-2009
Standard similar to GB/T 14652.1-2009 GB/T 18572 GB/T 33435 GB/T 20894 GB/T 19316 Basic data | Standard ID | GB/T 14652.1-2009 (GB/T14652.1-2009) | | Description (Translated English) | Small craft -- Fire-resistant fuel hoses | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U37 | | Classification of International Standard | 47.080 | | Word Count Estimation | 10,146 | | Date of Issue | 2009-03-09 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 14652.1-2001 | | Quoted Standard | ISO 3: 1973; ISO 1307: 1992; ISO 1402 | | Adopted Standard | ISO 7840-2004, IDT | | Regulation (derived from) | National Standard Approval Announcement 2009 No.2 (Total No.142) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the general requirements for fire-resistant fuel hoses and physical tests. This section applies to boats submarines equipped with permanently fixed fuel system hose used, not for the well located entirely boat and ship directly connected with outboard motor boat used hoses. Non- fire-resistant fuel hoses technical requirements, see GB/T 14652. 2 " non- fire-resistant fuel hoses boats. " | GB/T 14652.1-2009: Small craft -- Fire-resistant fuel hoses---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small craft. Fire-resistant fuel hoses
ICS 47.080
U37
National Standards of People's Republic of China
GB/T 14652.1-2009/ISO 7840.2004
Replacing GB/T 14652.1-2001
Refractory boat fuel hoses
(ISO 7840.2004, IDT)
Posted 2009-03-09
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 14652 is divided into two parts.
--- Part 1. Fire-resistant fuel hoses;
--- Part 2. Non-fire-resistant fuel hoses.
This section GB/T 14652 Part 1.
This section is equivalent to using ISO 7840.2004 "refractory boat fuel hoses."
This Part replaces GB/T 14652.1-2001 "refractory boat fuel hoses."
This section compared with the GB/T 14652.1-2001, mainly for the following changes.
--- The "nominal inner diameter" to "ID";
--- Test the ambient temperature "23 ℃" to "(23 ± 2) ℃";
--- 5.1 "1.36MPa" to "1.4MPa";
--- 5.3 "30%" to "35%";
--- 5.6 "2X" to "seven times";
--- Increasing the bending properties of low-temperature test, wear test, resistance to dry heat test, oil test, adhesion test;
--- Fuel permeability unified unit of "g/(m2 · 24h)", with 24h time unit;
--- Revised Chapter 6;
--- Appendix A diagram part scantlings allow a certain amount of error, and all components are numbered and described increases
Item 8. metal heat shield.
This section of the Appendices A and B are normative appendix.
This part is proposed by the China State Shipbuilding Corporation.
This part of the National Standardization Technical Committee under the jurisdiction of the boat.
This section was drafted by. China Shipbuilding Industry Corporation seventh Research Institute of ○.
The main drafters of this section. King Bao.
This part of the standard replaces the previous editions are.
--- GB 14652-1993, GB/T 14652.1-2001.
GB/T 14652.1-2009/ISO 7840.2004
Refractory boat fuel hoses
1 Scope
GB/T 14652 provisions of this part of the captain on the boat is not greater than 24m, designed for working pressure of not more than 0.34MPa,
An inner diameter of not more than 10mm and below; and not more than 0.25MPa, diameter greater than 10mm of transport petrol and diesel fuel fire hose
General requirements and physical tests.
This section applies to boats lifeboat with a permanent fixed fuel system hose is used, does not apply in the well and is located in the stern and side
Boat outside the machine directly connected hose is used.
Non-fire-resistant fuel hoses technical requirements see GB/T 14652.2 "non-refractory boat fuel hoses."
2 Normative references
The following documents contain provisions which, through reference GB/T 14652 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
ISO 3. 1973 Priority number Priority number series
ISO 1307.1992 for general industrial use of rubber and plastic hose and an inner diameter tolerances and tolerances on length
ISO 1402.1994 Rubber and plastics hoses and hose assemblies hydraulic test
ISO 1817.2005 Determination of vulcanized rubber liquid influence
ISO 7233.2006 Rubber and plastics hoses and hose assemblies vacuum performance
ISO 7326.2006 Rubber and plastics hoses - Assessment of resistance ozone resistance under static conditions
ISO 10088.2001 Small craft - Permanently installed fuel systems and fixed fuel tanks
3 General requirements
Hose inner surface should be smooth and nonporous, chemical impurities and other defects.
Hose should meet the requirements in Chapter 5 of the test to prove that their vessels suitable for use. Hose flag shall comply with the provisions of Chapter 6.
An inner diameter of 4
Table 1 ISO 3 the R10 series lists some of the inner diameter. Its tolerance should be as shown in Table 1 or in compliance with ISO 1307.1992's
Provisions.
Table 1 millimeters diameter and Tolerance
3.2
± 0.5
± 0.75
6.3
9.5
12.5
± 0.75
31.5
± 1.25
± 1.5
GB/T 14652.1-2009/ISO 7840.2004
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14652.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 14652.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14652.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14652.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14652.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14652.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|