Path:
Home >
GB/T >
Page726 > GB/T 14386-2025
Home >
Standard_List >
GB/T >
Page726 > GB/T 14386-2025
GB/T 14386: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14386-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Machines for planing and thickness in one operation for woodworking - Vocabulary and accuracy
| |
GB/T 14386-2025
|
| GB/T 14386-2008 | English | 234 |
Add to Cart
|
3 days [Need to translate]
|
Woodworking machines -- Surface planning- and thicknessing-machines -- Nomenclature and acceptance conditions
| Valid |
GB/T 14386-2008
|
| GB/T 14386-1993 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Woodworking machines. Surface planing and thicknessing machines. Accuracy tests
| Obsolete |
GB/T 14386-1993
|
Basic data
| Standard ID | GB/T 14386-2025 (GB/T14386-2025) |
| Description (Translated English) | Machines for planing and thickness in one operation for woodworking - Vocabulary and accuracy |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | J65 |
| Classification of International Standard | 79.120.10 |
| Word Count Estimation | 14,116 |
| Date of Issue | 2025-10-31 |
| Date of Implementation | 2026-05-01 |
| Older Standard (superseded by this standard) | GB/T 14386-2008 |
| Issuing agency(ies) | State Administration for Market Regulation and Standardization Administration of China |
GB/T 14386-2025: Machines for planing and thickness in one operation for woodworking - Vocabulary and accuracy
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 79.120.10
CCSJ65
National Standards of the People's Republic of China
Replaces GB/T 14386-2008
Terminology and Precision of Flatbed Woodworking Planers
Published on 2025-10-31
Implemented on May 1, 2026
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Table of contents
Preface III
1.Scope 1
2 Normative References 1
3.Terms and Definitions 1
4 General Requirements 3
5.Geometric accuracy inspection 3
Index 7
Figure 1.Example of a flatbed and planer woodworking machine.
Table 1 Geometric Accuracy Inspection 3
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document supersedes GB/T 14386-2008 "Terminology and Precision of Woodworking Machine Tools - Flatbed Planers", and is consistent with GB/T 14386-2008.
In comparison, aside from structural adjustments and editorial changes, the main technical changes are as follows.
---The normative references have been changed (see 4.2, 4.7 and Table 1; 3.2, 3.7 and Table 2 in the.2008 edition);
---The term "Terminology" has been changed to "Terms and Definitions," and the example diagram and related technical content of the flatbed woodworking planer have been revised (see page 3).
Chapter 4 (2008 edition);
---The phrase "Brief Description" has been changed to "General Requirements," and the relevant content descriptions have been revised (see Chapter 4, Chapter 3 of the.2008 edition);
---The inspection methods in the geometric accuracy inspection items have been changed (see Chapter 5, Chapter 5 of the.2008 edition);
---The fixture in geometric accuracy inspection item 4 has been changed (see Table 1, No. 4 in Chapter 5, Chapter 5, G4 in the.2008 edition).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Technical Committee on Standardization of Woodworking Machine Tools and Cutting Tools (SAC/TC84).
This document was drafted by. Fujian Provincial Academy of Mechanical Sciences, Shunde Polytechnic, and Foshan Shunde Woknior Machinery Co., Ltd.
The company, Weihai Product Quality Standards Metrology and Inspection Institute, and Shandong Gongyou Machinery Co., Ltd.
The main drafters of this document are. Cheng Deming, Wang Rongfa, Wang Can, Ju Hongxiang, and Song Zhimin.
This document was first published in.1993, revised for the first time in.2008, and this is the second revision.
Terminology and Precision of Flatbed Woodworking Planers
1 Scope
This document defines the terminology for a flatbed and flatbed woodworking planer and its main components, specifies the geometric accuracy inspection and corresponding tolerances, and describes...
The corresponding experimental methods were developed.
This document applies to the precision inspection of general-purpose, ordinary-precision flatbed and flatbed woodworking planers.
This document is not applicable to operational tests of flatbed and pressure woodworking planers (such as inspections for vibration, abnormal noise, and component creep), nor is it suitable for...
Used for testing the characteristics of machine tools (such as speed, feed rate, etc.).
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 17421.1-2023 General Rules for Machine Tool Inspection - Part 1.Geometric Accuracy of Machine Tools under No-Load or Quasi-Static Conditions
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
A two-sided woodworking planer that first performs planing (reference surface machining) on the workpiece and then pressure planing (thickness machining) in one feed.
Note 1.Hereinafter referred to as "machine tool".
Note 2.The main components of the machine tool and their names are shown in Figure 1.
3.2
The transmission mechanism that raises and lowers the planer's worktable.
3.3
Planing outfeedtable after planing
The worktable from which the workpiece is output after planing.
3.4
Cutterblockguard
Protective device for the working part of the cutter shaft.
3.5
Planer body cutterblock
A shaft-shaped part for holding cutting blades.
3.6
tiltable guide plate canting fence
A plate-shaped component used to guide workpieces to move in a certain direction and can be tilted at a certain angle.
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB/T 14386-2025_English be delivered?
Answer: Upon your order, we will start to translate GB/T 14386-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB/T 14386-2025_English with my colleagues?
Answer: Yes. The purchased PDF of GB/T 14386-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version GB/T 14386-2025?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14386-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.