Path: Home > GB/T > Page726 > GB/T 14331-2025 Home > Standard_List > GB/T > Page726 > GB/T 14331-2025 GB/T 14331: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14331-2025 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Automatic spring winding machine - Testing of the accuracy
| |
GB/T 14331-2025
|
| GB/T 14331-2017 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Automatic spring winding machine -- Testing of the accuracy
| Valid |
GB/T 14331-2017
|
| GB/T 14331-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Automatic spring winding machine. Testing of the accuracy
| Obsolete |
GB/T 14331-1993
|
Basic data | Standard ID | GB/T 14331-2025 (GB/T14331-2025) | | Description (Translated English) | Automatic spring winding machine - Testing of the accuracy | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J62 | | Classification of International Standard | 25.120.10 | | Word Count Estimation | 10,160 | | Date of Issue | 2025-10-31 | | Date of Implementation | 2026-05-01 | | Older Standard (superseded by this standard) | GB/T 14331-2017 | | Issuing agency(ies) | State Administration for Market Regulation and Standardization Administration of China | GB/T 14331-2025: Automatic spring winding machine - Testing of the accuracy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25.120.10
CCSJ62
National Standards of the People's Republic of China
Replaces GB/T 14331-2017
Automatic spring coiling machine precision
Published on 2025-10-31
Implemented on May 1, 2026
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document replaces GB/T 14331-2017 "Precision of Automatic Spring Coiling Machines". Compared with GB/T 14331-2017, except for structural adjustments and...
Aside from editorial changes, the main technical changes are as follows.
---Added normative reference to GB/T 36484 (see Chapter 3);
---The tolerance requirement for the overlap of the lower feed shaft shoulder support surface has been changed (see 5.1.1.2, 4.1.1.2 in the.2017 version);
---The inspection methods for radial and end face runout of the lower feed shaft have been modified (see 5.1.3; 4.1.3 in the.2017 version);
---The parallelism tolerance requirement between the slider stroke of the variable diameter mechanism and the front plane of the fuselage has been changed (see 5.1.4.2,.2017 version).
4.1.4.2);
---The tolerance requirements for radial runout of the camshaft (distribution shaft) have been changed (see 5.1.5.2, 4.1.5.2 in the.2017 version);
---Added a repeatability accuracy test item for the rotation of the cable tray (see 5.1.6);
---Added an inspection item for the accuracy requirement of the wire delivery length (see 5.1.7);
---The method for verifying working accuracy has been changed (see 5.2, 4.2 in the.2017 version).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Technical Committee on Standardization of Forging and Pressing Machinery (SAC/TC220).
This document was drafted by. Zhejiang Chuangyu Machinery Technology Co., Ltd., Nantong Chaoli Plate Rolling Machine Manufacturing Co., Ltd., and China Heavy Machinery Research Institute.
Institute Co., Ltd., Shengzhou Machinery Industry Association, Shengzhou Jinshi Spring Machinery Co., Ltd., Zhejiang Shengda Robotics Technology Co., Ltd., Zhejiang
Lanya Technology Co., Ltd., and Jinan Foundry & Forging Institute Inspection and Testing Technology Co., Ltd.
The main drafters of this document are. Li Chao, Tang Ziqin, Wang Shechang, Lou Yu, Li Hongliang, Wang Guoyong, Qiu Mingjun, Fan Yulin, Feng Dongxiao, and Hu Dengxue.
Lin Xinlong, Wang Hua, Nie Yuhan.
This document was first published in.1993, revised for the first time in.2017, and this is the second revision.
Automatic spring coiling machine precision
1 Scope
This document specifies the inspection requirements and accuracy testing for automatic spring coiling machines.
This document applies to automatic spring coiling machines used for cold-rolled springs.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 1239.1-2009 Technical conditions for cold-rolled cylindrical helical springs – Part 1.Tension springs
GB/T 1239.2-2009 Technical conditions for cold-rolled cylindrical helical springs – Part 2.Compression springs
GB/T 1239.3-2009 Technical conditions for cold-rolled cylindrical helical springs - Part 3.Torsion springs
GB/T 1973.1-2021 Small cylindrical helical springs - Part 1.Technical conditions
GB/T 4357-2022 Cold-drawn carbon spring steel wire
GB/T 8170 Rules for rounding off numerical values and the representation and determination of limiting values
GB/T 10923 General Rules for Precision Inspection of Forging Machinery
GB/T 24760-2009 Cast Iron Straight Edge
GB/T 36484 Terminology for Forging Machinery
3 Terms and Definitions
The terms and definitions defined in GB/T 36484 apply to this document.
4.Inspection Requirements
4.1 The accuracy inspection shall comply with the provisions of GB/T 10923.
4.2 Before the accuracy inspection, the installation level of the automatic spring coiling machine should be adjusted, and the levelness should not exceed 0.20/1000.
4.3 The front plane of the automatic spring coiling machine body is the inspection reference plane for items 5.1.2, 5.1.3, 5.1.4 and 5.1.5, and its flatness tolerance shall not exceed [value missing].
0.05mm.
4.4 The allowable tolerances for various precision parameters of the automatic spring coiling machine shall be calculated based on the actual inspection length, and the calculation results shall be rounded to the micrometer according to GB/T 8170.
Digital value. If the converted value is less than 0.01mm, it shall be counted as 0.01mm.
4.5 The accuracy of cast iron straight edges shall not be lower than the Grade 1 accuracy specified in GB/T 24760-2009.
Price & DeliveryUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14331-2025: Automatic spring winding machine - Testing of the accuracy
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14331-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 14331-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14331-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14331-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14331-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14331-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |